Page 1
Page 2
CENTRIFUGAL PUMPS CDX
CONTENTS 60Hz
Rev. E
Page
- SPECIFICATIONS 200
SELECTION CHART 201
TYPE KEY AND CURVE SPECIFICATIONS 202
PERFORMANCE CURVE CDX 70 203
PERFORMANCE CURVE CDX 120 204
PERFORMANCE CURVE CDX 200 205
- CONSTRUCTIONS 300
SECTIONAL VIEW 300
MECHANICAL SEAL 301
- DIMENSIONS AND WEIGHT 400
PUMP 400
PACKING 401
- TECNICAL DATA 500
MOTOR DATA 500
100
EBARA PUMPS EUROPE S.p.A.
Page 3
CENTRIFUGAL PUMPS CDX
SPECIFICATION 60Hz
Rev. E
PUMP
Type of liquid Clean water
min. -5
Liquid
Handled
Maximum working pressure [MPa] 0.8
Construction
Connection
Material
Applicable standard of test ISO 9906 – Annex A
Temperature [°C]
Impeller Closed centrifugal type
Shaft seal type Mechanical seal
Bearing Sealed ball bearing
Suction [inch] from G 1¼ to G 1½ UNI ISO 228-1 Pipe
Discharge [inch] G 1 UNI ISO 228-1
Casing EN 1.4301 (AISI 304) - (AISI 316 only for “L” version)
Impeller EN 1.4301 (AISI 304) - (AISI 316 only for “L” version)
Casing cover EN 1.4301 (AISI 304) - (AISI 316 only for “L” version)
Shaft seal
Shaft AISI 303 / AISI 316 (Wet extension)
Bracket Aluminium
max. +60 (CDX 70/076-70/106-70/156)
max. +90
max. +110 (H-HS-HW-HSW)
max. +120 (E)
Ceramic/Carbon/NBR (for CDX)
Ceramic/Carbon/FPM (for CDXH)
SiC/SiC/FPM (for CDXHS)
Tungsten Carbide/Tungsten Carbide/FPM (for CDXHW)
SiC/Tungsten Carbide/FPM (for CDXHSW)
MOTOR
Type
No. of Poles 2
Rotation speed [min-1] ≈ 3450
Insulation Class F
Protection degree (CEI EN 60034-5) IP 55
Power rating
Frequency [Hz] 60
Voltage [V]
Capacitor Built in Over load protection Built in Provided by the user
Casing material Aluminium
Base material / Motor support Aluminium
Dimensions of cable entry PG 11 - PG 13.5 (see dimensions page 400)
[kW] 0.55 ÷ 1.5 0.55 ÷ 2.2
[HP] 0.75 ÷ 2.0 0.75 ÷ 3.0
Single Phase Three Phase
110-115 ±6%
220-230 ±6%
Electric - TEFC
220/380-460 -6% +10%
200
EBARA PUMPS EUROPE S.p.A.
Page 4
CENTRIFUGAL PUMPS CDX
SELECTION CHART 60Hz
Rev. E
Pump type Power
Three PhaseSingle Phase
CDXM 70/076 CDX 70/076 0.55 0.75 23.5 22.2 20 17.5 16.5 - - - - - CDXM 70/106 CDX 70/106 0.75 1 32.3 31 28.6 26 - - - - - - CDXM 70 /156 C DX 7 0/156 1.1 1.5 44.5 43.5 40.2 36. 3 - - - - - - -
CDX M 120 /1 06 C DX 120/1 06 0 .75 1 23 .8 - 21.8 20. 2 1 9.7 18.1 1 6.8 15.5 14 - CDX M 120 /1 56 C DX 120/1 56 1.1 1.5 32 - 29 .8 28. 3 2 7.7 26 .2 25 23 .5 - - -
CDX M 120 /2 06 C DX 120/2 06 1.5 2 45 .5 - 43.2 41 4 0.4 38.2 3 6.8 35.5 - - CDX M 200 /1 56 C DX 200/1 56 1.1 1.5 23.3 - - 20. 8 2 0.4 19.4 1 8.6 17.8 17 15.2 13 .5
CDX M 200 /2 06 C DX 200/2 06 1.5 2 32 - - 30 2 9.5 28.6 2 7.9 27.2 26. 3 2 4.6 2 3
- C DX 20 0/3 06 2.2 3 38 .8 - - 35. 5 3 5.1 3 4 3 3.3 32 .5 31. 6 2 9.8 28.3
[kW] [ HP]
l/min 0 20 50 80 90 120 140 160 180 220 250
m³ /h 0 1 .2 3 4.8 5.4 7.2 8.4 9.6 10.8 13.2 1 5
H=T ot al man om e tr ic he ad in met ers
Q=Capa city
201
EBARA PUMPS EUROPE S.p.A.
Page 5
CENTRIFUGAL PUMPS CDX
TYPE KEY AND CURVE SPECIFICATIONS 60Hz
Rev. E
TYPE KEY
CDX H M 70
L
/
106
HP 0.75
HP 1
HP 1.5
HP 2
HP 3
POWER CODE
HYDRAULIC CODE
ONLY SINGLE PHASE
OPTIONAL VERSION
ONLY AISI 316 VERSION
MODEL
076
106
156
206
306
70
120
200
H
HS
HW
HSW
PERFORMANCE CURVE SPECIFICATIONS
The specifications below qualify the curves shown on the following pages.
Tolerances according to ISO 9906 Annex A
The curves refer to effective speed of asynchronous motors at 60 Hz
Measurements were carried out with clean water at 20°C of temperature and with a kinematic viscosity
of = 1 mm
The NPSH curve is an average curve obtained in the same conditions of performance curves.
The continuous curves indicate the recommended working range. The dotted curve is only a guide.
In order to avoid the risk of over-heating, the pumps should not be used at a flow rate below 10% of best
efficiency point.
Symbols explanation:
2
/s (1 cSt)
Q = volume flow rate
H = total head
P
= pump power input (shaft power)
2
= pump efficiency
NPSH = net positive suction head required by the pump
202
EBARA PUMPS EUROPE S.p.A.
Page 6
CENTRIFUGAL PUMPS CDX
PERFORMANCE CURVE 60Hz
Rev. E
CDX 70/076 (0.55 kW) - Impeller diameter = 115 mm
CDX 70/106 (0.75 kW) - Impeller diameter = 132 mm
CDX 70/156 (1.1 kW) - Impeller diameter = 157 mm
Rotation speed ≈ 3450 min-1
Test standard: ISO 9906 – Annex A
203
EBARA PUMPS EUROPE S.p.A.
Page 7
CENTRIFUGAL PUMPS CDX
PERFORMANCE CURVE 60Hz
Rev. E
CDX 120/106 (0.75 kW) - Impeller diameter = 115 mm
CDX 120/156 (1.1 kW) - Impeller diameter = 132 mm
CDX 120/206 (1.5 kW) - Impeller diameter = 157 mm
Rotation speed ≈ 3450 min
Test standard: ISO 9906 – Annex A
-1
204
EBARA PUMPS EUROPE S.p.A.
Page 8
CENTRIFUGAL PUMPS CDX
PERFORMANCE CURVE 60Hz
Rev. E
CDX 200/156 (1.1 kW) - Impeller diameter = 115 mm
CDX 200/206 (1.5 kW) - Impeller diameter = 132 mm
CDX 200/306 (2.2 kW) - Impeller diameter = 144 mm
Rotation speed ≈ 3450 min
Test standard: ISO 9906 – Annex A
-1
205
EBARA PUMPS EUROPE S.p.A.
Page 9
CENTRIFUGAL PUMPS CDX
CONSTRUCTION 60Hz
Rev. E
SECTIONAL VIEW
N° PART NAME MATERIAL Q.TY N° P ART NAME MATERIAL Q.TY
1 Casing AISI 304 / AISI 316 [8] 1 25 Drain plug AISI 303 / AISI 316 [8] 1
3 Motor bracket Aluminium 1 26 O-r ing [3] NBR 1
4 Casing cover AISI 304 / AISI 316 [8] 1 32 Key AISI 316 1
6 Shaft with rotor AISI 303 / AISI 316 [8] ( Wet extension) 1 34 Impeller nut AISI 304 / AISI 316 [8] 1
7 Impeller AISI 304 / AISI 316 [8] 1 42 Motor support Aluminium 1
11 Mechanical seal [3] - [4] Carbon/Ceramic/NBR 1 52 Terminal box [1] ABS 1
12 Motor frame with stator - 1 53 Terminal box cover [6] ABS [6] 1
13 Motor c over Aluminium 1 56 Box gasket NBR 1
14 Fan PA 1 73 Casing ri ng [5] AISI 304 / AISI 316 [ 8] 1
15 Fan cover Fe P04 Zincate 1 75 Washer AISI 304 / AISI 316 [8] 1
16 Terminal board - 1 76 Washer AISI 304 / AISI 316 [8] 1
17 Terminal box cover [2] Aluminium 1 77 O-ring [3] NBR 1
18 Splash ring NBR 1 78 O-ring [3] NBR 1
19 Pump side ball bearing - 1 90 Terminal box cover gasket [7] NBR 1
20 Fan side ball beari ng - 1 92 Lip seal - 1
21 Adjusting ring Steel C70 1 93 Lip seal - 1
22 Tie rod Fe 420 Zincate 4 110 Protector [1] - 1
23 Capacitor [1] - 1 200 Screw Stainless steel A2 UNI7323 8
24 Priming plug AISI 303 / AISI 316 [8] 1
[1] Only for single phase
[2] Only for three phase
[3] FPM for CDX H-HS-HW-HSW
[4] Special version, see page 301
[5] NBR for CDX 70/076-70/106-70/156
FPM for CDX H-HS-HW-HSW of the CDX 70/076-70/106-70/156
[6] Whit gasket in NBR only for version single phase CDXM 70/076, 70/106, 70/156, 120/106, 120/156, 200/156
[7] Only for version single phase CDXM 120/206, 200/206
[8] Only for “L” version
300
EBARA PUMPS EUROPE S.p.A.
Page 10
CENTRIFUGAL PUMPS CDX
CONSTRUCTION 60Hz
Rev. E
MECHANICAL SEAL
REF PART NAME
A Rotary seal ring Ceramic Ceramic Silicon carbide Tungsten carbide Silicon carbide
B Stationary seal ring Carbon graphite Carbon graphite Silicon carbide Tungsten carbide Tungsten carbide
CO Ring NBR FPM FPM FPM FPM
DO Ring NBR FPM FPM FPM FPM
EO Ring NBR FPM FPM FPM FPM
F Self driving spring AISI 316 AISI 316 AISI 316 AISI 316 AISI 316
G Frame AIS I 304 AISI 304 AISI 316 AISI 316 AISI 316
Standard version
(CDX) (CDXH) (CDXHS) (CDXHW) (CDXHSW)
MATERIAL
Optional
BEARINGS
Pump type Ball Bearing
Single Phase Three Phase Pump side Fan side
CDXM 70/076 CDX 70/076 6203 2RSH 6202 2RSH
CDXM 70/106 CDX 70/106 6203 2RSH 6202 2RSH
CDXM 70/156 CDX 70/156 6203 2RSH 6202 2RSH
CDXM 120/106 CDX 120/106 6203 2RSH 6202 2RSH
CDXM 120/156 CDX 120/156 6203 2RSH 6202 2RSH
CDXM 120/206 CDX 120/206 6204 2RSH 6203 2RSH
CDXM 200/156 CDX 200/156 6203 2RSH 6202 2RSH
CDXM 200/206 CDX 200/206 6204 2RSH 6203 2RSH
- CDX 200/306 6204 2RSH 6203 2RSH
301
EBARA PUMPS EUROPE S.p.A.
Page 11
CENTRIFUGAL PUMPS CDX
DIMENSIONS AND WEIGHT 60Hz
Rev. E
PUMP
Pump t yp e
CDXM
CDX
70/076 208 321 320 181 229.5 106 123.5 207 216 50 38 120 160 108 PG 11 PG 11 92.5 G 1"¼ 8.5 8.4
70/106 208 321 320 181 229.5 106 123.5 207 216 50 38 120 160 108 PG 11 PG 11 92.5 G 1"¼ 9.5 9.6
70/156 208 321 332 181 229.5 106 123.5 207 216 50 38 120 160 108 PG 11 PG 11 92.5 G 1"¼ 11.7 12.5
120/106 208 321 320 181 229.5 106 123.5 207 216 50 38 120 160 108 PG 11 PG 11 92.5 G 1"¼ 9.5 9.5
120/156 208 321 332 181 229.5 106 123.5 207 216 50 38 120 160 108 PG 11 PG 11 92.5 G 1"¼ 11.7 12.4
120/206 208 347 359 198.5 229.5 106 123.5 225 249 55 40 140 180 105.5 PG 13.5 PG 11 95 G 1"¼ 15.3 14.5
200/156 208 321 320 181 229.5 106 123.5 207 216 50 38 120 160 108 PG 11 PG 11 92.5 G 1"½ 11 10.7
200/206 208 347 359 198.5 229.5 106 123.5 225 237 55 40 140 180 105.5 PG 13.5 PG 11 95 G 1"½ 15 15.7
200/306 232 - 359 198.5 250 118 132 237 - 55 40 140 180 105.5 - PG 11 95 G 1"½ - 16.9
[1~] = Single phase
[3~] = Three phase
ACHH1H2H3H4MM1NN1RTVWDNA
B
[1~] [3~] [3~] [1~] [1~] [3~] [1~] [3~]
Dimensions [mm] Weight
[kgf]
400
EBARA PUMPS EUROPE S.p.A.
Page 12
CENTRIFUGAL PUMPS CDX
DIMENSIONS AND WEIGHT 60Hz
Rev. E
PACKING
Type pumps Packing [mm] Weight
Single Phase Three Phase
CD XM 70 /0 76 C DX 70/076 21 5 215 265 26 5 33 2 332 9 .1 9
CD XM 70 /1 06 C DX 70/106 21 5 215 265 26 5 33 2 332 1 0.2 1 0. 3
CD XM 70 /1 56 C DX 70/156 21 5 239 265 28 9 33 2 372 1 2.4 1 3. 1
CDXM 120/106 CDX 120/106 215 215 265 265 332 332 10.3 10.3
CDXM 120/156 CDX 120/156 215 239 265 289 332 372 12.3 13
CDXM 120/206 CDX 120/206 239 239 289 289 372 372 16 15.2
CDXM 200/156 CDX 200/156 215 215 265 265 332 332 11.6 11.3
CDXM 200/206 CDX 200/206 239 239 289 289 372 372 15.7 16.4
- CD X 2 00/ 306 - 2 39 - 28 9 - 3 72 - 1 7.6
[1~] Single phase
[3~] Three phase
XY Z[kgf]
[1~] [3~] [ 1~] [3~] [1~] [3 ~] [1~] [ 3~]
401
EBARA PUMPS EUROPE S.p.A.
Page 13
CENTRIFUGAL PUMPS CDX
TECHNICAL DATA 60Hz
Rev. E
MOTOR DATA
Pump type
Single Phase Three Phase
CDXM 70/076CDX 70/0760.550.754525012.5450------0.700.747.5 3.42.01.21.228.115.09.65.56.4
CDXM 70/106CDX 70/1060.751.06025014450------1.050.979.4 5.12.91.71.648.822.015.08.513.0
CDXM 70/156 CDX 70/156 1.1 1.5 - - 25 450 80.7 82.3 81.5 77.9 81.7 82.7 1.56 1.50 - 7.5 3.8 2.2 2.2 - 35.0 28.8 16.6 19.1
CDXM 120/106 CDX 120/106 0.75 1.0 60 250 14 450 - -----1.060.9910.4 5.22.91.71.748.822.015.08.513.0
CDXM 120/156 CDX 120/156 1.1 1.5 - - 25 450 80.7 82.3 81.5 77.9 81.7 82.7 1.50 1.50 - 7.2 3.8 2.2 2.2 - 35.0 28.8 16.6 19.1
CDXM 120/206 CDX 120/206 1.5 2.0 - - 35 450 82.4 83.0 82.2 79.5 82.9 83.8 2.34 2.90 - 11.3 8.1 4.7 4.3 - 69.0 54.4 31.4 38
CDXM 200/156 CDX 200/156 1.1 1.5 - - 20 450 77.2 79.5 79.3 76.6 80.9 82.3 1.35 1.00 - 6.6 2.9 1.7 1.6 - 32.0 20.6 11.9 13.6
CDXM 200/206 CDX 200/206 1.5 2.0 - - 35 450 82.4 83.0 82.2 79.5 82.9 83.8 2.06 2.90 - 10.0 8.1 4.7 4.3 - 69.0 54.4 31.4 38
- CDX 200/306 2.2 3.0 ----82.483.082.279.582.983.8-2.90- - 8.14.74.3 - -54.431.438
Power
[kW] [HP]
110-115 V
F]
Capacitor
[V]
220-230 V
F]
Efficiency (% load)
Three phase (380 V)
50% 75% 100% 50% 75% 100%
[V]
Efficiency (% load)
Three phase (460 V) [A]
Input
[kW]
Single Three
Phase Phase 110-115 V 220-230 V 220 V 380 V 460 V 110-115 V 220-230 V 220 V 380 V 460 V
Full load current
Single Phase
Three Phase
Single Phase
Locked rotor current
[A]
Three Phase
500
EBARA PUMPS EUROPE S.p.A.
Loading...