The KF750F 3-way triamplified full range system contains
many new EA W technologi es that make it a powerful con cert
touring sound reinf or cem en t tool. I ts A cousti c Sin gularity™
design align s the three subsystems alon g a single axis so the
KF750 acts as a true point source , greatly red ucin g temporal
smearing of staccato events and improving overall clarity
and impact.
Since the large mid frequency horn contains both the high
and low frequency subsystem s, the overall pack age is just 31
in. high. Still, the KF750F provi des consistent wi deband pattern control in both the vertical and horizontal planes.
The LF subsystem includ es two vented 12-in woofers mounted
in the MF horns upper and lower walls as a Dipolar Array™.
This Dipolar Array extends vertical directivity well into the
LF passband to minimize midbass build up below the array.
The large MF horn loads a speci ally d esigned 10-in mi dr ang e
cone whose geometry exactly matches the rear of its phase
plug assembly . By developing th e driver an d phase plug as a
single unit, pathlength discontinuities within the MF
passband have been eliminated without compromising the
directional qu alities o f the sour ce as all previ ous phase plug
designs have.
The 2-in exit/100mm voice coil HF compression driver is
mounted on a 35 x 35 constant directivity horn mounted
coaxially within the MF horn flare.
The KF750F’s 15°-per-side trapezoidal enclosur e features eight
4-position flytracks (four each front and rear) that accept
industry-standard flyclips.
APPLICATIONS
The KF750F is design ed to create arr ays with optimized coverage in both the horizontal and vertical planes to cover
audience areas ranging from 200 to 80,000 people.
At just 31-in tall and 190 lb . per m odule, KF750F arrays will
be smaller , lighter , m ore efficient and, th er ef or e , m or e powerful than those built with other systems. These smaller,
lighter arrays are easier to fly, require less truck space and
permit more open sight lines to cover any given venue.
The KF750F works with a companion downfill module, the
KF755F to provide full range nearfield coverage below the
array. When KF755’s are either not available or not desired,
the KF750F’s smooth power response produces remarkably
even SPL levels throughout the cover age area, allowin g it to
be used for nearfield coverage when necessary.
Applications include:
Concert Tours
Performing Arts Centers
Theaters
DESCRIPTIVE DATA
Configuration3-Way, Full Range
PoweringTriamplified (MX8600 Processor)
LF Subsystem2x 12-in Cones,
Dipolar Array, Vented
MF Subsystem10-in Cone, Radial Phase Plug,
Horn-Loaded
HF Subsystem2-in Exit/100mm Voice Coil
Compression Driver on CD Horn
Cabinet Type (shape)Trapezoidal
Enclosure MaterialsBaltic Birch Plywood
FinishBlack Polyurethane
Connectors2x Neutrik NL8 Speakon
Suspension Hardware8x 4-Position Flytrack
(4 each front and rear)
GrillPowder Coated Perforated Steel,
Foam Backed
Dimensionsinchesmillimeters
Height31.00787
Width (Front)27.00686
Width (Rear)8.78233
Depth34.00864
Trapezoid Angle15 degrees per side
Weightspoundskilograms
Net Weight19086.5
Shipping Weight20091.0
Companion Systems
Sub BassSB850R/SB1000e/KF940
Full Range DownfillKF755F
OptionsKF700 Series Caster Pallet
EASTERN ACOUSTIC WORKS
One Main Street, Whitinsville, MA 01588 • (508) 234 - 6158 • FAX (508) 234 - 8251 • Email [email protected] • Web http://www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. • PUB# KF750F-888048 (A)/2 pp/1/29/99 • Printed In USA
The three-way full ran g e lou dspeak er system s shall incorporate 2x 12-in LF transd ucers, a 10-in MF con e transd ucer and
a 2-in exit/100mm voice coil compression driver HF transducer.
The LF drivers shall be moun ted in a vented enclosur e tuned
for optimum low frequency response and separated vertically to produce off-axis cancellation at a tuned frequency.
The MF driver shall be mounted on a large-format horn and
A
shall be coupled to a phase plug whose geometry exactly
matches that of th e d river. Th e HF driver shall be loaded on
a constant directivity h orn with a nomin al cover ag e pattern
of 35° (h) x 35° (v).
System frequency response shall vary no more than ±3 dB
from 48 Hz to 18 kHz measured on axis. The loudspeaker’s
subsystems (LF/MF/HF) shall produce Sound Pressure Level
6.63
(SPL) of 103/109/116 dB SPL on axis at 1 meter with a
power input of 1 Watt, and shall be capable of producing a
peak output of 139.8/141.0/145.0 dB SPL on axis at 1 meter .
The subsystems (LF/MF/HF) shall handle 1200/400/200 W atts
of amplifier power (AES Standard) and shall have nominal
impedances of 2x 8/8/8 Ohms.
The loudspeaker enclosure shall be trapezoidal in shape. It
shall be constructed of 15mm thi ckness void-free cr oss-grainlaminated Baltic Birch plywood and shall employ extensive
internal bracin g. It shall be finished in black catalyzed polyurethane. Input connector shall be a Neutrik NL8 with an
additional NL8 provided for connect through. A total of
eight 4-position flytracks (4 each front and rear) shall be
provided . The fr ont of th e loudspeak er shall be cover ed with
a powdercoated perforated steel grill.
The three-way full range loudspeaker systems shall be the
EAW model KF750F.