EAW Jumpstart MX8600 User Manual

MX8600 processor

Jumpstart

manual

LOADING A PRE-CONFIGURED SETTING

1. Connect AC power cord.

2. T urn unit on (power switch on back right panel).

3. Press MENU button. Use FREQ knob to scroll through the menu choices.
NOTE:Do not enter password locking until you are familiar with the unit.

4. Select MEMORY RECALL.Press ENTER button.

5. Use FREQ knob to locate desired memory location Press ENTER button. Memory is now recalled.

CREATING A NEW SETTING

Follow steps 1 – 3 above .

4. Select UNIT CONFIGURA TION.

5. Use FREQ knob to select desired template (A,B,C,or D).Press ENTER button to edit the c onfiguration.

6.Press ENTER button again to confirm choice.

7.Follow steps below to enter the desir ed settings.

MX8600 Jumpstart manual