EAW JF50S User Manual

Installation Instructions

JF50S BRACKET

EAW DWG NO 480360 (0)

1. Inventory

Before beginning installation, inventory kit to items listed.

Item EAW P/N Qty Description
1 606073 1 Bracket, HD50WM
2 102246 2 Screw, 3/8-16 x 1-1/2 SHCS, Black
3 105062 2 Washer, Neoprene, 3/8 I.D. X 1 O.D.
4 105010 2 3/8 Washer, Flat, Black
5 105011 2 3/8 Washer, Lock, Black

WARNING: Installation should only be done by an experienced technician. Improper installation may cause
serious injury. The surface where the bracket/cabinet is to be fastened must have enough structural integrity
to support 300 pounds.

2. Mounting the Bracket

Due to various construction methods and materials used today, the hardware for securing the
bracket to the mounting surface is not supplied. It is recommended that you consult a building
professional for the proper mounting hardware before mounting the bracket.

3. Removing the Shipping Hardware

Remove the flat head screws from
the top and bottom of the cabinet
using a 7/32 Allen wrench.

4. Hanging the Cabinet

A. Place a neoprene gasket on

the bracket’s lower arm.

(2) NEOPRENE
WASHER
EAW P/N 105062

(2) SCREW 3/8-16 X 1-1/2
SHCS 18-8 BLK
EAW P/N 102246

5

11.12

(2) LOCK WASHER 3/8
EAW P/N 105011

(2) FLAT WASHER 3/8
EAW P/N 105010

Center it on the slot.

3

B. Position the cabinet between

the bracket arms.

8.00

C. Align the bracket’s top slot to the

cabinet’s 3/8-16 threaded hole.

D. Holding the cabinet in position,

3X Ø.31 THRU

insert the screw with its
lock washer and flat washer
through the bracket’s slot and
into the cabinet’s top threaded
hole and hand tighten.

E. Repeat step D through

the bottom bracket slot.

5

F. Position cabinet and

tighten the top & bottom
mounting screws with a
5/16 Allen wrench.

1 Main Street • Whitinsville, MA 01588 • Phone [phone] • FAX [phone]

JF50S

3

18.29

8.00

2

3.00

MOUNTING BRACKET
HD50SWM
EAW P/N 606073

EASTERN ACOUSTIC WORKS