EAW FR102 Specifications

Ultra Compact
Nearfield Full
Range System

Ultra Compact Size Occupying less than one cubic foot of volume, the FRI02 is the ideal problem

solver for tight fitting applications such as under balcony fill, foreground
music, satellite W/HF and highly portable AV presentations.

Exceptionally Wide The FRI02 maintains a horizontal coverage of 110 degrees above 16,000 Hz
Horizontal Coverage so even the highest musical overtones can be heard by every listener. This

wide open sound contributes to the FRI02's natural "hi-fi" sound character.

High Output Capabilities The combination of the FRI02's 98 dB SPL sensitivity and 250 watts of AES

standard power handling results in 121 dB SPL maximum output at one meter.
This enables the FRI 02 to offer the equivalent output of
compact studio monitor loudspeaker systems.

Ultra Durability The FR102, despite its size, is built to the same standards of contruction as

EAW's concert sound reproducers and, as such, provides a level of durability
and reliability virtually unmatched in the pro sound industry. All exterior
surfaces are constructed of imported multi-ply cross-grain-laminated birch
hardwood. Standard features include perforated steel grills, recessed hand
holds and catalyzed polyurethane coating finish.

4 to 8 typical hi-fi or

Architect's and Engineer's

Speciafiications

Model FRI 02

he loudspeaker system shall be of the two-way type,
incorporating one 10-inch low frequency loudspeaker in a
vented direct radiator enclosure and a combination
compression driver horn high frequency tweeter. The
system shall meet the following performance criteria:
Frequency range: 55 to l9k Hz; Pressure sensitivity: 98 dB
SPL; Power handling 250 watts in accordance with AES
standard specification; Horizontal coverage: 130 degrees
between -6 dB points. The high frequency driver shall have
fero-fluid in the voice coil gap. The crossover shall be a third
order design incorporating asymmetrical slopes providing
driver equalization.
The cabinet shall be constructed of void-free
crossgrain-laminated birch plywood and coated with
catalyzed polyurethane finish. The low frequency driver
shall be protected with a perforated steel grill coated in vinyl.

The loudspeaker system shall be the Eastern Acoustic
Works Forsythe Series model FR102.

Specif ications

MODEL: FRI02
Frequency Response
+- 3 dB: 80 to 16,000 Hz

- 10 dB: 55 to 19,000 Hz
Axial Sensitivity: 98 dB SPL
Half Space Efficiency: 2.3%
Power Handling
Sine Wave: 100 watts
AES Standard: 250 watts
Nominal Impedance: 8 ohms
Coverage Angles
Horizontal: 130 degrees
Vertical: 50 degrees
Maximum SPL: 121 dB SPL
Maximum Acoustic Output: 5.75 acoustic watts
Transducer Complement
Low Frequency: RCF PRO L 10/560 250mm
High Frequency: RCF N252F Horn/Driver
Crossover Data:
Type: Third Order Equalized
Slope: 18 dB per octave
Frequency: 3,500 Hz
Enclosure Type: Vented
Enclosure Volume: 29 liters (1.0 ft3)
Construction: Cross-Grain- Laminated Birch
Finish: Catalyzed Polyurethane
Dimensions: 18" H x 12"W x 8" D
Weight: 17.3 Kg (38 lbs)