EasyPix EasyPad 700 User Guide

User Guide

Congratulations on your new EasyPad 700.

Please follow the instructions in this manual
carefully.

Statement: If the final version of this product has any differences from

the description of the user guide, please subject to the final product, as we

are eager to provide you the newest software updates. Thank you!

Contents List:

1. 7” Inch Touch Digital Touch Screen Easypad

2. Adapter

3. Manual

Safety Precautions

1. Always disconnect the device from the power adaptor before cleaning.

Wipe the touch screen using only a clean cellulose sponge or chamois cloth.

Do not use chemicals or abrasive cleaning agents.

2. DO NOT leave the device on your lap or any part of the body for prolonged

periods of time as the unit may become warm during use.

3. DO NOT use excessive force on the touch screen and do not use devices

that may cause damage to the screen.

4. DO NOT expose to strong magnetic or electrical fields.

5. DO NOT expose to or use near liquids, rain, or excessive moisture.

6. SAFE TEMP: This device should only be used in environments with ambient

temperatures between 5° and 40°.

7. ONLY USE the power adaptor provided with this device

Transportation Precautions

When travelling with your EasyPad always switch off the unit and place it into the

protective bag provided. If packing your EasyPad along with other items always

ensure that it is packed away from anything that could cause damage to it, sharp

edges, liquids etc.

Airplane Precautions

Please refer to specific Airline guidance and instruction before using this device

onboard any aircraft.

Overview

Front View

Left side View:

Speaker Speaker

Right side View:

Power LED / Charge LED

Home

Headphone

HDMI Out USB

interface

Mini-USB
Interface

Reset Power

Microphone

Interface

Top View:

TF card slotPower Volume

interface

Getting Started

Charge your Easypad with the power cable for 12 hours before the initial

operation.

Battery Charging

The EasyPad has an internal battery which you can charge with the

Power Adapter

Charging the battery

1. Plug in the power adapter, the battery charge indicator turns red, indicating

charging. When the battery is fully charged, the indicator shows blue.

After unpluging the power adapter, the indicator always shows green.

2. You can operate the EasyPad during the battery charging process.

Note:

The charging time will be longer when operating and charging at the same time.