EasyN NR-1-A4 User Manual
1
Table of Contents
1. Safety Warnings ............................................................................................................................ 3
2. Hard Disk Installation ................................................................................................................... 4
3. Product Description ....................................................................................................................... 6
4. Technical Specifications ................................................................................................................ 8
5. Turning On / Off the Device ......................................................................................................... 9
6. Client Software Instruction ......................................................................................................... 10
1. Run Client Software .................................................................................................... 10
2. Search for NVR and IP Camera .................................................................................. 11
3. Modify IP .................................................................................................................... 12
4. Add IP Camera ............................................................................................................ 14
5. Add “NVR Host .......................................................................................................... 22
6. Modify Camera (Channel) Name ................................................................................ 27
7. Add / Modify Schedule ............................................................................................... 27
8. Harddisk Management ................................................................................................ 28
9. Search for NVR Log ................................................................................................... 29
10. Online Backup ........................................................................................................... 29
11. User and User Rights Settings ................................................................................... 30
12. Video Playback .......................................................................................................... 31
13. Alarm Settings / Streaming Media Settings .............................................................. 32
14. Motion Detection Area Settings / Video Shelter / Audio / OSD Settings .................. 33
15. Monitor View (1, 4, 9, 16 view layout, save view, get view and select task) ............ 31
16. Power off / Reboot / Verify time ............................................................................... 36
Warranty………………………………………………………………………………………….38
2
1. Safety Warnings
For your safety, please read and follow the following safety warnings:
1. Do not expose the NVR to any heat sources.
2. Please make sure the environment is well-ventilated. Do not block the ventilation
opening of the NVR.
3. Keep all liquids away from the NVR.
4. Ensure that the NVR is provided with the correct supply voltage. Plugging the
NVR to an incorrect power source could damage the unit.
5. Make sure the temperature and humidity of the environment are in optimized level.
6. Damped dust on PCB in the device will cause short circuit, so in order to ensure
the NVR’s stable and long-term operation, please regularly clean the PCB,
connector, chassis and chassis fan using soft brush.
7. Please install DVR-specific hard disks recommend by our company.
About This Manual:
This user manual provides detailed information and instructions especially for
the NR-1-A4 series NVR.
After receiving the product, please check all the items in the package with the
packing slip to ensure that all the proper components are present. If any of the items
are missing or broken, contact your dealer to arrange a replacement.
3
2. Hard Disk Installation
Notice
Please install DVR-specific hard disks recommend by our company.
NR-1-A4 series can install a maximum of 1 hard disk.
Please make sure the device is turned off before installation.
Installation Tool: Phillips screwdriver
NR-1-A4 series hard disk installation procedure:
1. Unscrew the nuts on the rear panel and then take off the chassis cover.
2. Put the hard disk in the chassis, and then fix it on the hard disk bracket by using
the screw driver.
3. Connect one end of the hard disk cable to the main board and the other end to the
hard disk, and then connect power cable to the hard disk.
4
Red for hard disk data line, black for power connection line.
4.
Cover the chassis and then fix it with the screwdriver.
5
NR-1-A4 Series
Front V iew:
3. Product Description
NR-1-A4 series supports maximum 1 hard disk.
There are three LED indicators on the front panel to show the current device status.
The visible angle of the LED indicators is 170°.
LED Indicators:
Name Description
Power Status LED If the light is lit continuously, it indicates
that the device is powered.
Network Status LED If the light continues flashing, it indicates
that the network is in its normal status.
If the light is lit continuously, it indicates
that the hard disk is connected and in its
Hard disk Status LED
normal status.
Back View:
If the light continues flashing, it indicates
that the hard disk is transmitting data.
6
Name Connection instruction
Power switch Power on/off
Power connector 12V power connector
RJ45 connector 100M network connector
7
4. Technical Specifications
Model NR-1-A4
Video compression H.264
Video input 4 channel IP camera EasyN H3、EasyN F2
Playback resolution 1280x720
Network interface 1 100M RJ45 interface
Hard disk interface 1 SATA interface
Hard disk capacity Each interface supports a maximum of 2TB
Power supply
Power consumption ≤ 12 W （hard disk is not included）
Operating temperature -10℃--＋55℃
Operating humidity 10％--90％
Chassis 1U
Dimensions
Weight（hard disk is not
included）
DC 12V/5A
260mmx187mmx45mm (W x D x H)
1125g
8
5. Turning On / Off the Device
1. Turn On the device
After the power socket is connected, press the power switch on the rear panel of
NVR.
2. Turn Off the device
Press the power switch on the rear panel of the device.
Note: Please make sure that the power supply is compatible to the required
power supply according to technical specifications.
9
6. Client Software Instruction
1. Run Client Software
Run Nvr_Clairvoyance.exe (globe icon)in standalone software package and then a login
screen will welcome you. Enter your user name and password then click the “Login”
button to Login. (Both user name and password are “admin” by default.) As shown in
Figure 1:
Put user and password( user:admin ,password :12345) in the pop-up login window , as the
followin g shown:
Figure 1
10
Figure 2
2. Search for NVR and IP Camera
After login, right click “Network video server”, and then click “searching tool”.
Figure 3
11
On “NVR-SET” screen, you will see three sub-screens including “default parameters
list” which shows default parameters of NVR hosts and IP Cameras, “network camera
list” which shows all the online IP cameras’ IP on current LAN and “NVR host list”
which shows all the online NVR hosts’ IP on current LAN. As shown in Figure 4:
Figure 4
3. Modify IP
1. Modify NVR IP:
Right click "NVR host list" ,chose " parameters settings" , As shown in Figure 5:
12
Loading...