Eastman LTM, CD3, CD3H, COL, CDLH User Manual
...
EASTMAN_®------------------------------------
Marking
Machines
Cloth
Drill Marker
Model CD3,
Hawk/Model COL, CDLH
CD3H
Super
Lite
Drill
Magnum
Punch
Model MP2
Thread
Model
Perforator
Marker
LTM
INSTRUCTION
------------------------
HotNotcher
Model
HVN
BOOK
AND
PARTS LIST
Eastman
O.era
Cer~It.\f'(or
FormC-1
Cutt•~
0n
·
Uperl~Se
EASTMAN
®
MarMar
Mar
MarMar
MacMac
Mac
MacMac
kingking
king
kingking
hineshines
hines
hineshines
CAUTION:
Super Lite Drill
Page 10-11
Safety glasses should be worn
whenever operating this
equipment.
Hot Notcher
Model HVN
Page 20-22
Cloth Drill Marker
Model CD3, CD3H
Hawk/Model CDL, CDLH
Page 3-9
Hot Notcher-Model HVN
Especially useful when marking loose knit materials; the Hot Notcher sears
a line that will not unravel or become lost in transit to the sewing room.
Featuring a fully adjustable heating element for safe use with virtually any
fabric, and a variable depth gauge for heavy or specialized material.
The Eastman Hot Notcher marking machine is engineered to meet all
domestic and international safety codes and is available for 110v/220v,
50/60 Hz and single or three phase power supplies.
Hawk Drill Marker-Model CDL, CDLH
With it's muscle magnifying lever action drill, the Hawk will mark faster
and with less operator fatigue, through the hardest materials, than can
any other drill marker available. These full-featured models will handle
virtually any drill marking you may have. See page 3 for Drill/Awl options.
Super Lite Drill Marker
Engineered with superior durability and convenient servicing in mind, the
Super Lite Drill Marker is ideal for the international market, where these
requirements are paramount.
Available in cold or heated models and for use with 120v or 240v power
supplies and fitted with and 8" or 9-1/2" baseplate, the Super Light Drill
Marker is able to perform near the capabilities of our heavier duty models
with the advantage of lower initial cost. The Super Lite Drill Marker is
for use with 8" drill/ awls of 5/64", 3/32", 1/8", 5/32", 3/16", and 1/4"
diameters only. See page 3 for drill/awl part numbers.
2
Form C-1077
Cloth DrillCloth Drill
Cloth Drill
Cloth DrillCloth Drill
Model CD3, CD3H, CDL, and CDLH
Operating Instructions
Read instructions carefully before starting mo-
CAUTION:
OPERATION
Set gauge as indicated on illustration for drilling proper height of material.
Position Drill Marker over mark on material with drill directly over mark.
To start, throw switch lever to "on" position and let motor gather full
speed before starting to drill.
Enter Drill or Awl into the goods slowly. Do not force the drill thru
the material with heavy pressure as this will cause the drill to burn or
bend and break, or cause motor damage.
LUBRICATION
The Upper and Lower Motor Ball Bearings as well as the Spindle Ball
Bearing in the handle are grease sealed and require no lubrication.
TO CHANGE DRILL
Lay Drill Marker on it's side, use Chuck Key to loosen drill. Remove the
old Drill from the Chuck and pull down and thru Drill Guide Bushing.
Insert new Drill thru lower Drill Guide Bushing and up into Chuck.
Tighten using the Chuck Key.
NOTE:
tor. Be sure that voltage is the same as stamped
on nameplate
Each diameter Drill or Awl requires a corresponding
Guide Bushing. See chart below. List the serial
number of your drilling machine on all orders for drills
or parts.
EASTMAN DRILL SELECTION TABLES
Eastman offers a wide selection of Drill Points and Awls for different type
materials.
Make sure you get the type Drill you need. Avoid errors by using the Drill
Number listed in the tables.
Drill and Awls for 4" Drills, actually measure 5-1/2" long.
Drill and Awls for 6" Drills, actually measure 7-1/2" long.
Drill and Awls for 8" Drills, actually measure 10" long.
Drill and Awls for 11-1/2" Drills, actually measure 13-1/2" long.
DRILL OR AWL SELECTION TABLE
Drill or Awl Dia 3/64" 5/64" 3/32" 1/8" 5/32" 3/16" 1/4" 5/16"* 3/8"*
Drill
Hole Size
Diamond 6" 231C1-6 231C1-7 231C1-8 231C1-9 231C1-10 -- -- -- -Point 8" -- 231C1-12 231C1-13 231C1-14 -- -- -- -- --
Taper 6" 231C1-7 231C1-8 231C2-10 231C2-12 231C2-13 -- -- -- -Point 8" 231C2-17 231C2-19 231C2-20 231C2-21 231C2-24 -- 231C2-36 231C2-37 231C2-38
Open End 6" -- 231C3-18 231C3-11 231C3-12 231C3-13 231C3-14 231C3-15 231C3-16 -Awl 8" -- 231C3-20 231C3-22 231C3-21 231C3-24 231C3-23 231C3-32 -- --
Closed End 6" -- -- 231C4-5 231C4-6 231C4-7 231C4-8 231C4-9 231C4-22 231C4-23
Awl 8" -- -- 231C4-15 231C4-10 231C4-11 231C4-12 231C4-20 231C4-25 231C4-24
DRILL GUIDE BUSHING SELECTION TABLE
Cold Drill Bushing 21C13-40 21C13-36 21C13-34 21C13-35 21C13-37 21C13-38 21C13-42 21C13-41 21C13-44
Hot Drill Bushing 21C13-51 21C13-52 21C13-53 21C13-54 21C13-55 21C13-56 21C13-65 21C13-66 21C13-67
*Multiple Size Bushing 21C13-59 21C13-59 21C13-59 21C13-63 21C13-63 -- -- -- --
*OPTIONAL Multiple size bushing, cold drills only.
Bushing No. 2 21C13-59 for 3/64, 5/64, 3/32 & 1/8 hole sizes
Bushing No.2 21C13-63 for 5/32 & 3/16 hole sizes.
Length
4" -- 231C1-1 231C1-2 231C1-3 -- -- -- -- --
11-1/2" -- -- -- -- -- -- -- -- --
4" 231C2-1 231C2-2 231C2-3 231C2-4 -- -- -- -- --
11-1/2" 231C2-42 231C2-43 231C2-27 231C2-26 231C2-28 231C2-29 -- -- --
4" -- 231C3 231C3-1 231C2-2 -- -- 231C2-5 231C2-10 231C2-7
11-1/2" -- -- 231C3-25 231C3-27 231C3-28 -- -- -- --
4" -- -- 231C4 231C4-1 231C4-2 231C4-3 231C4-29 231C4-30 231C4-31
11-1/2" -- -- 231C4-17 231C4-18 231C4-19 -- 231C4-26 -- --
*For 1/4" dia. and larger, use chuck 229C1-6 &
setscrew 309C20-1. For models CD3H and CDLH,
1/4" dia. and larger, use Guide Heat Bracket 728C1-10.
Form C-1077
3
®
EASTMAN
Cloth DrillCloth Drill
Cloth Drill
Cloth DrillCloth Drill
Model CD3, CD3H, CDL, and CDLH
Illustrated Parts List
Motor Assemblies
NOTE:
Number
1C4-11 0 0 1 1 Spacer Sleeve
4C1-180 4 4 4 4 Nut
4C1-191 1 1 1 1 Shaft Lock Nut
4C1-192 1 1 1 1 Lower Bearing Nut
4C2-101 0 1 0 1 Wire Nut
4C2-111 0 1 0 1 Speed Nut
8C5-10 1 1 1 1 Automatic Switch Insulation
Please specify model and serial number of machine when ordering parts
PHASE
THREE
PHASE
Part
CD3 & CDL
CD3H & CDLH
CD3 & CDL
SINGLE
CD3H & CDLH
Description
SINGLE
Part
Number Description
10C2-30 1 1 1 1 Rotor Fan
12C1-34 0 2 0 2 Lock Washer
12C1-42 1 1 1 1 Loading Spring Washer
12C15-90 0 1 0 1 Lock Washer for Control
18C6-31 1 1 1 1 Tolerancing Ring
18C6-38 1 1 1 1 Locating Ring Switch
20C3-32 0 0 4 4 Motor Screw
20C3-36 4 4 0 0 Motor Screw
20C13-91 0 1 0 1 Drive Screw
52C5-164 1 1 1 1 Switch Base
52C5-172 0 1 0 1 Control, Pilot Light, Switch
52C5-181 1 0 1 0 Switch Base
53C2-106 1 0 1 0 Switch Cover
53C7-39 1 1 1 1 Rear Bearing Cover
53C7-42 1 1 1 1 Rear Bearing Cover 11-1/2"
73C7-121 2 2 2 2 Tubing Insulation
90C1-154 1 1 1 1 Upper Bearing Housing
90C2-144 1 1 1 1 Lower Bearing Housing
90C6-43 1 1 1 1 Lower Ball Bearing
90C6-44 1 1 1 1 Upper Ball Bearing
98C4-32 0 1 0 1 Switch Cap
104C1-6 0 1 0 1 Dial Indicator
144C1-10 0 1 0 1 Pilot Light 110v
144C1-11 0 0 0 1 Pilot Light 220v
147C1-35 1 1 1 1 Extension for Cover 11-1/2"
251C1 0 0 0 1 Heat Control 220v
251C1-1 0 1 0 0 Heat Control 110v
300C10-3 3 3 3 3 Screw 6-32 x 5/16 Round Head
300C12-2 2 2 2 2 Screw 8-32 x 3/8 Round head
301C7-3 8 8 8 8 Screw 4-36 x 1/4 Fillister Head
301C10-3 2 2 2 2 Screw 6-32 x 3/8 Fillister Head
301C10-4 2 2 2 2 Screw 6-32 x 1/2 Fillister Head
301C14-7 2 2 2 2 Screw 10-24 x 1 Fillister Head
512C1-122 0 0 1 1 Rotor with Fan
512C1-128 1 1 0 0 Rotor with Fan
514C4-229 1 1 0 0 CD3/Stator w/Band 110v 60cy 3600rpm
514C4-232 1 1 0 0 CD3/Stator w/Band 110v 50cy 3000rpm
514C4-233 1 1 0 0 CD3/Stator w/Band 220v 60cy 3600rpm
514C4-234 1 1 0 0 CD3/Stator w/Band 220v 50cy 3000rpm
514C4-235 1 1 0 0 CDL/Stator w/Band 110v 60cy 3600rpm
514C4-238 1 1 0 0 CDL/Stator w/Band 110v 50cy 3000rpm
514C4-239 1 1 0 0 CDL/Stator w/Band 220v 60cy 3600rpm
514C4-240 1 1 0 0 CDL/Stator w/Band 220v 50cy 3000rpm
514C4-117 0 0 1 1 CD3/Stator w/Band 220v 60cy 3600rpm
514C4-118 0 0 1 1 CD3/Stator w/Band 220v 50cy 3000rpm
514C4-188 0 0 1 1 CDL/Stator w/Band 220v 60cy 3600rpm
514C4-198 0 0 1 1 CDL/Stator w/Band 220v 50cy 3000rpm
537C1-21 1 1 1 1 Rear Brg Cover w/Extension 11-1/2"
580C1-48 0 1 0 1 Toggle Switch
580C1-65 0 0 1 1 Switch for Motor (Three phase)
580C1-70 1 1 0 0 Automatic Cut Out Switch
580C1-85 1 1 0 0 Switch for Motor (Single phase)
597C2-26 1 1 0 0 Automatic Cut Out 60 Cy 3600 rpm
597C2-27 1 1 0 0 Automatic Cut Out 50 Cy 3000 rpm
597C2-28 1 1 0 0 Automatic Cut Out 50 Cy 1800 rpm
626C1-42 1 0 1 0 Switch Bracket w/Switch Base
626C1-43 0 1 0 1 Switch Bracket w/Switch Base
783C1-3 1 1 1 1 Ground Wire Assy.
CD3 & CDL
CD3H & CDLH
CD3H & CDLH
CD3 & CDL
PHASE
THREE
PHASE
4
Form C-1077
&
I
~~c•~
I
301C1G-4
r'
r-
..
,C,M
597C2·26
597C2·27
597C2·28
251C1 220V.
251C1-1 110V.
WIRING DIAGRAM
CD3H
AND
Single
__ _ Attachment Plug
Terminal Block
Reier
to
For Detailed
CDLH
Phase
Back Ccwer
Parts
List
rj'A~783C1·3
i
~ [ ~
: \
---:-·
,-'
/ 580C1·85 Sinple
300C10·3
580C1·65 Three
Phase
Phase
10<4C
1-6
Part
ot
251C1
251C1-1
,,ov.60cy.3600A.P.M.
110V.50cy.3000A.P.
2:20V.
60
cy. 3600 R.P.M. Single
220V.
50
cv.
3000
R.P.M.
90C2·1«
90C6-43
18C6-31 !
~
~
..............
~
,.,.,~
.
¥
4C1·180
514C4-111
514C4-118
2
60cy.
20V.
220V. 50cv.
3600
R.P.M., Three
3000
R.P.M.
COL
514C4·235
514C4-238
514C4·239
514C4·240
4·188
514C4·198
I
4C1·192~
WIRING DIAGRAM CD3 AND COL
NOTE:
When
toe
machines prior
and
512CH28
ordering Single Phase
to
1989,
must also
be
Statoc
part numbers 20C3·36
ocdered.
& Bands
-----------------------------------
Single
M.
Phase
\ 12C1·34
,
tacs-36
~
Phase
"-.,...
o1<
1
ttov.eocy
110V.
2:20V.
2:20V.
2:20V.
2:20V.
Phase
50
cy.
60
cy.
50
cy.
60
cy.
50
cy.
301C7-3
. 3600 R.
P.M
R.P.
M.
A.P.
M.
R.P.M.I
R.P.M.
. I
Stngle
Throo
Phase
Phase
3000
3600 R.P.M.
3000
3600
3000
Eastman
·
Or"eril~ff.tcJr_rofCl!ltJ.rig~
Form C-1077
5
®
EASTMAN
Cloth DrillCloth Drill
Cloth Drill
Cloth DrillCloth Drill
Model CD3 and CD3H
Illustrated Parts List
Standard and
Base Plate Assembly
NOTE:
Please specify model and serial number of
machine when ordering parts.
No.
Part
Number
4C1-161 2 0 Flex Nut
4C1-184 0 2 Stop Nut
8C13-69 0 2 Heat Insulator
12C15-91 1 1 Spacing Washer
14C1-27 1 1 Handle Grip
14C1-30 1 1 Handle Grip
15C1-25 1 1 Machine Handle Stud
17C1-17 2 0 Dowel Pin
17C1-22 0 2 Dowel Pin
17C15-126 1 1 Dowel Pin
18C6-42 1 1 Retaining Ring
18C6-43 2 2 Rubber "O" Ring
18C6-44 1 1 Retaining Ring
20C7-13 1 1 Thumb Screw
20C13-86 2 2 Set Screw
21C14-9 1 1 Bushing For Spring
29C6-85 1 0 Adaptor For Bushing
34C10-155 1 1 Spring For 6" Post
34C10-156 1 1 Spring For 8" Post
34C10-157 1 1 Spring For 11-1/2" Post
50C11-30 0 1 Cable Clamp
52C5-155 1 1 Level Base
52C5-182 1 1 Base Plate
55C4-95 0 1 Spacer For Heating Element
62C1-170 1 1 Handle Bracket
62C16-172 1 0 Lower Guide Bracket
62C16-234 1 1 Lower Guide Bracket
70C4-30 1 1 Locator Guide
70C3-39 2 2 Spring Retainer
73C7-123 0 1 8" Tube For Lead Wire
73C7-124 0 1 6" Tube For Lead Wire
73C7-125 0 1 11-1/2" Tube For Lead Wire
79C12-265 1 1 6" Drill Size Decal
79C12-266 1 1 8" Drill Size Decal
79C12-267 1 1 11-1/2" Drill Size Decal
83C4-32 1 1 Level Flange
83C4-16 1 1 Flange For Post
90C6-45 1 1 Spindle Ball Bearing
92C2-12 1 1 Spindle 6" and 8"
92C2-13 1 1 Spindle 11-1/2"
127C1-6 0 1 Heat Element 110V.
127C1-7 0 1 Heat Element 220V.
141C1-40 1 1 Gauge
142C1-18 1 1 Key For Driver
142c1-22 1 1 Key For Handle
189C1-19 1 1 8" Post
189C1-20 1 1 6" Post
189C1-21 1 1 11-1/2" Post
200C1-10 1 1 Driver Only
229C1-5 1 1 Chuck
237C1 1 1 Bullseye Vial
300C7-3 2 2 Screw, 4-36 x 1/4 Round Head
300C10-2 0 1 Screw, 6-32 x 1/4 Round Head
300C10-4 2 2 Screw, 6-32 x 3/8 Round Head
301C12-9 0 1 Screw, 8-32 x 1/4 Fillister Hd. (Stainless Steel)
302C12-2 4 4 Screw, 8-32 x 5/16 Flat Head
302C10-7 2 0 Screw, 6-32 x 5/8 Flat Head
302c12-12 0 2 Screw, 8-32 x 1 Flat Head
302C14-6 3 3 Screw, 10-24 x 5/8 Flat Head
531C1-48 1 1 Machine Handle
728C1-6 0 1 Guide Heat Bracket
797C1-1 1 1 Key for Chuck and Holder
802C1 1 1 Driver with Key
302C8-5 3 3 Screw, #4-40 x 1/4 Flat Head
Req'd
CD3
CD3H
Description
6
Form C-1077
* 17C15-126
*~,&~~
*' PARTS OPTtONAL ON CD3 & COL
For selecting bushing size
see chart
21C13·59 Bushing
21C13-63 Bushing
on
page
3.
r------/_~
ONLY
2C1
300C10·4
~~
.
~
T
?::::>
~
~
-
71C3·39
·
?
j
~142C:I.-22
189C1-19 8"'
20
189C1·
189C1·21
'11·111
6"
."
200C1-10 ...
92C2·121 6" & 8"'
92C2·13 11'/z . r . .
18C6-43
.,
_!(}
. y: 142C1·18 ( ' (
i'
I
,A/1
1 U
./~
0
·~·
.
531C1-48
15C1-25
I 62C1-170 '.
.
«::::::::::~
#~
302C12·2
·
~-~
L- 127C1·6 110V
1.
"'"'1'
~
127C1-7 220v: 728C1-6 .
"\
~21C14·9
1
II
l.
II· J.
I
I
'
'
~
90C6-45~
18C6-42
12C15-91-
I
..
~
@
=·
(
62C16·172 !
63(".4-!l2
~
237C1--t?
.
g
6"
34C10·157
8"
11-112"
~
4C1·184
17C1·177
17C1·22
. \
*~0
300C10-~/
50C11·30 1
~"
~18C6-44
I
¥1
l.e
I
I I
.
~
~:
~
c:
QJ--;;:-
''\
73C7·123
73C7·124
73C7·125 11·112"
41C1·40
.,
.....__
~20C7·13
~
/~
·--:::::
~
~
8"
6"
r--300C7-3
70C4·30
I
\._..-/'
79C12-265 52C5·182
..c...--
•part of Level
Send Kit #820C1..01
*SEE
----------------------------------
PAGE 3
FOR DRILL
AND DRILL GUIDE BUSHING TABLE
OR
AWL SELECTION TABLE
#237C1
79C12·266 a· · .
79C12·.267
,'h.
302C10·7
302c12-12r
I/
1 L
302C14·6
Eastman
Or"eriJ.~ff.tcJr_rofCl!ltJ.rig~
Form C-1077
·
7
®
EASTMAN
Cloth DrillCloth Drill
Cloth Drill
Cloth DrillCloth Drill
Model CD3 and CD3H
Illustrated Parts List
Standard and
Base Plate Assembly
NOTE:
Part
Number
4C1-149 3 3 Elastic Stop Nut
4C1-161 2 0 Flex Nut
4C1-184 0 2 Elastic Stop Nut
4C2-110 1 1 Elasic Stop Nut
8C13-69 0 1 Heat Insulator
12C1-21 6 6 Lock Washer
12C15-91 1 1 Spacing Washer
14C1-32 1 1 Operating Handle
14C1-34 1 1 Handle Grip w/Lugs
15C1-30 1 1 Stud For Handle
17C1-17 1 0 Dowel Pin
17C1-22 0 1 Dowel Pin
17C5-17 2 2 Pivot Point
17C15-116 1 1 Roll Pin
Please specify model and serial number of machine when ordering parts
No.
Req'd
CDL
CDLH
Description
Part
Number
17C15-126 1 1 Dowel Pin
18C6-42 1 1 Retaining Ring
18C6-43 2 2 Rubber "O" Ring
18C6-44 1 1 Retaining Ring
20C7-13 1 1 Thumb Screw
20C12-143 1 1 Pivot Screw 6" & 8" Drills
20C13-86 2 2 Set Screw
21C14-9 1 1 Bushing For Spring
22C3-8 1 1 Tapered Handle
29C6-85 1 0 Adaptor For Bushing
34C10-155 1 1 Spring 6" Drill
34C10-156 1 1 Spring 8" Drill
34C10-157 1 1 Spring 11-1/2" Drill
46C3-21 1 1 Block For Link
50C11-30 0 1 Cable Clamp
52C5-191 1 1 Base
55C4-95 0 1 Spacer For Heating Element
55C4-105 2 2 Spacer Lever Handle
62C16-172 1 0 Lower Guide Bracket
62C16-234 1 0 Lower Guide Bracket
70C4-30 1 1 Locator Guide
71C3-39 2 2 Spring Retainer
73C7-123 1 1 8" Tube For Lead Wire
73C7-124 1 1 6" Tube For Lead Wire
73C7-125 1 1 11-1/2" Tube For Lead Wire
77C7-24 1 1 8" Link
77C7-25 1 1 6" Link
77C7-26 1 1 11-1/2" Link
79C12-265 1 1 6" Drill Size Decal
79C12-266 1 1 8" Drill Size Decal
79C12-267 1 1 11-1/2" Drill Size Decal
83C4-32 1 1 Level Flange
83C4-16 1 1 Flange For Post
83C4-20 1 1 Flange For Handle
90C6-45 1 1 Spring Ball Bearing
92C2-12 1 1 6" & 8" Spindle
92C2-13 1 1 11-1/2" Spindle
127C1-6 0 1 110V Heating Element
127C1-7 0 1 220V Heating Element
141C1-40 1 1 Gauge
142C1-18 1 1 Key For Driver
142C1-22 1 1 Key For Handle
147C1-37 1 1 11-1/2" Extension For Handle Lever
189C1-19 1 1 8" Post
189C1-20 1 1 6" Post
189C1-21 1 1 11-1/2" Post
200C1-10 1 1 Driver Only
229C1-5 1 1 Chuck
237C1 1 1 Bullseye Vial
300C7-3 2 2 Screw, 4-36 x 1/4 Round Head
300C10-2 1 1 Screw, 6-32 x 1/4 Round Head
300C10-4 2 2 Screw, 6-32 x 3/8 Round Head
300C12-3 6 6 Screw, 8-32 x 3/8 Round Head
300C15-4 1 1 Screw 10-32 x 1/2 Round Head 11-1/2" only
300C15-7 2 2 Screw 10-32 x 5/8 Flat Head
302C12-12 2 2 Screw 8-32 x 1" Flat Head
302C14-6 7 7 Screw 10-24 x 5/8 Flat Head
301C12-9 1 1 Screw 8-32 x 9/16 Fillister Head (Stainless Stl.)
302C10-7 2 2 Screw 6-32 x 5/8 Flat Head
309C12-2 2 2 Screw 8-32 x 5/16 Socket Set Screw
728C1-6 1 1 Guide Heat Bracket
797C1-1 1 1 Key for Chuck and Holder
802C1 1 1 Driver with Key
806C1-1 1 1 L.H. Handle Lever Assembly 8" Drill
806C1-2 1 1 R.H. Handle Lever Assembly 8" Drill
806C1-3 1 1 L.H. Handle Lever Assembly 6" Drill
806C1-4 1 1 R.H. Handle Lever Assembly 6" Drill
806C1-5 1 1 L.H. Handle Lever Assembly 11-1/2"" Drill
806C1-6 1 1 R.H. Handle Lever Assembly 11-1/2" Drill
302C8-5 3 3 Screw 4-40 x 1/4 Flat Head
No.
Req'd
CDL
Description
CDLH
8
Form C-1077
Loading...