Eastman 627X Parts List

"Genuine" Parts For Eastman Straight Knives

Univ. Eastman Number Number Description

GE1708 4C1-99 Sharpener Hold Down Nut (3) GE1709 4C1-150 Sharpener Hold Down Nut GE1710 4C1-179 Front to Rear Bearing Nut (4) GE1442 4C2-2 Plate Bolt Nut

20C3-38 ** Front to Rear Bearing Screw (4) 20C3-39 * Front to Rear Bearing Screw (4)

GE1713 20C13-96 * Standard to Bearing Screw (4) GE1046 24C4 Plate Bolt

* Class 627X Only ** Class 629X Only

Note: Number in parenthesis indicate quantity of a part required.

"Genuine" Parts For Eastman Straight Knives

Cutting Machines

4C1-99

Model 627X BRUTE

Model 629X BLUE STREAK II

SEE SHARPENER HOUSING ASSEMBLY (FRONT VIEW)

SEE SHARPENER HOUSING ASSEMBLY (REAR VIEW)

4C1-179

20C3-3 20C3-3

SEE

MOTOR ASSEMBLIES

Universal Sewing Supply

SEE

REPLACEMENT

BELTS

SEE

KNIVES

SEE FRONT BEARING HOUSING ASSEMBLY

20C13-964C1-150

24C4

SEE STANDARD and BASEPLATE ASSEMBLY

4C2-2

SEE LOWER GEAR BRACKET

1-314-862-0800 1011 East Park • St. Louis, Mo. 63130

ASSEMBLY

Subassembly 743C3-1 includes:

Univ. Eastman Number Number Description

GE1696 20C13-63 Socket Set Screw

766C1-1 Bevel Bloc Assembly (L.H.) 308C10-1 Socket Set Screw

(6-32 x 5/16") (2)

Univ. Eastman Number Number Description

GE1561 4C2-63 Nut (L.H.) (2)

715C1-16 Lower Gear Bracket (5"-10" Knife, Complete) 715C1-18 Lwr. Gear Brkt. (11-1/2"-13" Knife, Complete)

GE1115 820C1-40 Conversion Kit (R.H. & L.H. Shoes)

Conversion Kit includes the following:

GE1654 12C15-93 Washer Shoe (4) GE1495 20C6-25 * Adjusting Screw GE1657 20C12-153 Screw For Sharpener Shoe (2) GE1696 20C13-63 Socket Set Screw GE1697 21C14-7 Shoe Bushing (2) GE1698 34C10-145 Spring Shoe (L.H.) GE1699 34C10-146 Spring Shoe (R.H.)

95C5-3 Allen Wrench 95C5-5 * Allen Wrench

GE1700 103C2-35 Sharpener Shoe (R.H.) GE1701 103C2-36 Sharpener Shoe (L.H.)

308C10-1 * Socket Set Screw (6-32 x 5/16") (2)

GE1119 820C1-39 Conversion Kit (includes * parts above) Note: 766C1 and 766C1-1 are sold in pairs with kits only.

Note: Number in parenthesis indicate quantity of a part required.

"Genuine" Parts For Eastman Straight Knives

Model 627X BRUTE

Model 629X BLUE STREAK II

Sharpening Assembly

Bevel Bloc Shoe Assembly

187

Cutting Machines

OPTIONAL EQUIPMENT BEVEL BLOC SHOES SPECIAL ORDER ONLY

20C6-25

95C5-3

12C15-93

•20C13-63 103C2-36

21C14-7

12C15-93

34C10-145 20C12-153

•308C10-1

4C2-63 REF.

820C1-40

REF. - LOWER GEAR AND PULLEY BRACKET

12C15-93

103C2-35

21C14-7

12C15-93

34C10-146

20C12-153

308C10-1 95C5-5

1011 East Park • St. Louis, Mo. 63130 1-314-862-0800

Univ. Eastman Number Number Description

1C4-8 **** Cutout Sleeve

GE1349 4C1-145 Shaft Lock Nut GE1352 4C2-87 Clutch Nut GE1341 8C5-10 *** Automatic Switch Insulation

8C12-4 *** Lead Wire Insulation (2)

GE1353 10C1-41 Rotor Fan GE1343 12C1-12 Loading Spring Washer

12C1-32 Lock Washer

GE1347 13C1-9 Turning Knob GE1351 18C6-16 Retaining Ring

22C1-24 ** Carrying Handle 30C1-8 Dust Cap

GE1348 34C1-51 Clutch Spring

47C4-79 *** Terminal 47C4-80 *** Terminal

GE1714 53C7-35 Fan Cover GE1356 67C1-10 **** Cutout Mount

73C7-121 Terminal Wire Tubing 79C2-26 **** Direction Arrow Plate 90C1-146 Rear Bearing Housing

GE1582 90C6-46 Rear Ball Bearing

199C1-23 **** Wire Lug (3) 254C1 Cable Tie (4")

GE1574 300C12-3 **** Round Head Screw (8-32 x 3/8") (2) GE2015 300C12-6 Round Head Screw (4) GE1715 301C8-1 Fillister Head Screw (4-40 x 1/2") (3)

301C12-3 *** Fillister Head Screw (8-32 x 3/8") (2)

GE1350 305C8-1 Binding Head Screw (10)

305C10-1 Binding Head Screw 513C3-206 ** Rotor w/Shaft 513C3-225 * Rotor w/Shaft 514C5-109 *&*** Stator w/Band (110V, 60Hz, 3600RPM) 514C5-114 *&*** Stator w/Band (110V, 60Hz, 1800/3600RPM) 514C5-127 **&*** Stator w/Band (110V, 60Hz, 3600RPM) 514C5-129 **&*** Stator w/Band (110V, 60Hz, 1500/3000RPM) 514C5-146 **&**** Stator w/Band (220V, 60Hz, 3600RPM) 514C5-148 **&**** Stator w/Band (220V, 60Hz, 1800/3600RPM) 514C5-155 *&**** Stator w/Band (220V, 60Hz, 3600RPM) 514C5-158 *&**** Stator w/Band (220V, 60Hz, 1800/3600RPM)

GE1338 580C1-191 *** Cutout Switch (Dual Speed) GE1337 580C1-192 *** Cutout Switch (Single Speed) GE1345 597C2-14 *** Cutout Assembly (60C, 3600RPM) GE1716 597C2-25 *** Cutout Assembly (60C, 1500/3000RPM)

783C1-3 Grounding Wire Assembly

* Class 627X Only ** Class 629X Only

*** One Phase Motor Assemblies Only

**** Three Phase Motor Assemblies Only

Note: Number in parenthesis indicate quantity of a part required.

"Genuine" Parts For Eastman Straight Knives

Cutting Machines

Model 627X BRUTE

Model 629X BLUE STREAK II

SINGLE & THREE PHASE

MOTOR ASSEMBLIES

(Single & Dual Speed)

Universal Sewing Supply

1-314-862-0800 1011 East Park • St. Louis, Mo. 63130

"Genuine" Parts For Eastman Straight Knives

WARNING

Attach ground wire to ground terminal "E" on Terminal Block. Failure to ground Terminal Block may

STATOR WITH BAND

SINGLE-PHASE SINGLE-SPEED

514C5-109 514C5-127

STATOR WITH BAND

SINGLE-PHASE DUAL-SPEED

514C5-114 514C5-129

STATOR WITH BAND

THREE-PHASE SINGLE-SPEED

514C5-146 514C5-155

result electrocution or other serious personal injuries.

SEE ATTACHMENT PLUG TERMINAL BLOCK

CUTOUT SWITCH

(1-Phase) 580C1-192 Single Speed 580C1-191 Dual Speed

8C12-4

Cutting Machines

STATOR WITH BAND

THREE-PHASE DUAL-SPEED

514C5-148 514C5-158

73C7-121

(1-1/2" Long)

199C1-23

47C4-80

47C4-79

305C8-1

22C1-24

254C1

300C12-6

73C7-121

79C2-26

4C2-87

783C1-3

12C1-32

305C10-1

513C3-240 513C3-241

L.H.

18C6-16

L.H.

73C7-121

(3/4" Long)

90C6-46

12C1-12

301C8-1

67C1-10

8C5-10

300C12-3 301C12-3

1C4-8

90C1-146

CUTOUT ASSY. (1-Phase)

SINGLE SPEED

597C2-14 60Hz. 3600 R.P.M.

DUAL SPEED

597C2-25 60CY. 1800/3600R.P.M.

13C1-9

34C1-51

10C1-41

L.H.

30C1-8

1011 East Park • St. Louis, Mo. 63130 1-314-862-0800

4C1-145

53C7-35

Note: L.H. indicates left-handed thread. All others are right-handed

Univ. Eastman Number Number Description

4C1-111 Operating Handle Lock Nut

GE1717 4C1-132 Crank Ball Bearing Lock Nut GE1378 4C1-190 Lock Nut For Shaft GE1718 4C2-91 Nut For Guide Screw (3) GE1365 4C2-110 Stop Nut GE1374 4C3-8 Guide Adjustment Nut (3) GE1377 11C12-92 Shaft For Ball Bearing GE1385 12C1-21 Shakeproof Washer (2) GE1719 12C1-24 Knife Lock Washer

12C10-2 Washer (3)

GE1382 12C15-14 Guide Washer (6) GE1384 12C15-53 Connecting Rod Washer GE1369 15C13-23 Upper Stud (2) GE1375 15C13-34 Lower LH Mounting Stud GE1376 15C13-39 Lower RH Mounting Stud GE1720 17C4-6 Wrist Pin

18C6-79 Lock Ring 18C6-80 O-Ring

GE1386 20C5-17 Connecting Rod Clamp Screw (2)

20C12-62 Front Housing Plug Screw 20C12-79 Screw For Handle Bracket

GE1724 20C12-122 Guide Hold Down Screw GE1722 24C1-3 Knife Lock Bolt GE1362 34C10-142 Spring For Capacitor

52C5-194 Switch Plate (Dual Speed, 3 Ph.) 52C5-235 Switch Plate (Single Speed) 52C5-236 Switch Plate (Dual Speed, 1 Ph.) 53C2-111 Switch Cover 53C6-2 Oil Tube Cover 53C11-91 Capacitor Cover

GE1914 54C4-32 Wrist Pin Plug GE1366 62C1-140 Handle Bracket GE1725 71C3-18 Front Ball Bearing Retainer GE1364 72C4-28 Oil Hole Cover

73C7-203 Oil Tube, Clear 73C7-204 Oiler Tube

GE1729 85C1-44 Crank (1-3/4" Stroke) GE1728 85C1-45 Crank (1-1/2" Stroke) GE1727 85C1-46 Crank (1-1/4" Stroke) GE1726 85C1-52 Crank (1-1/8" Stroke)

90C2-162 Front Bearing Housing

GE1368 90C6-38 Front Ball Bearing GE1582 90C6-46 Sealed Crank Ball Bearing

91C4-25 Rivet Crosshead (2) 141C1-46 Gauge, Clear

Univ. Eastman Number Number Description

GE1457 191C1-21 Crosshead Felt Pad GE1730 191C1-38 Wrist Pin Felt Pad

191C1-42 Oil Felt Wicking, Long 191C1-43 Oil Felt Wicking, Short 191C1-45 Oil Felt Wicking (.187" x .44") 201C1-11 Eyelet 222C1-7 RTV Sealer 300C3-2 Round Head Screw (2-56 x 1/8") (4)

GE1415 300C10-4 Round Head Screw (6-32 x 3/8") (2) GE1691 302C8-2 Flat Head Screw (4-40 x 3/4") GE1661 302C10-4 Flat Head Screw (6-32 x 5/16") (4) GE1350 305C8-1 Binding Head Screw (4-40 x 1/4") (7)

307C18-1 Screw 308C12-1 Socket Head Screw (8-32 x 3/8") (3)

GE1379 308C14-1 Guide Hold Down Screw (4) GE1732 309C15-5 Guide Adjustment Screw (3) GE1390 525C1-4 LH & RH Guides (1-3/4" Stroke) GE1389 525C1-5 LH & RH Guides (1-1/2" Stroke) GE1915 525C1-1 LH & RH Guides (1-1/2" Stroke)

(For Old Style 625 Model Only)

GE1181 525C1-6 LH & RH Guides (1-1/4" Stroke)

525C1-7 LH & RH Guides (1-1/8" Stroke)

GE1733 531C1-53 Operating Handle

531C1-76 Cushion Grip Handle

GE1381 579C2-17 Cross Head w/Lock Washer & Bolt GE1361 580C1-100 Switch, Dual Speed (3 Phase) GE1167 580C1-198 Switch, Single Speed (1 & 3 Phase) GE1391 580C1-199 Switch, Dual Speed (1 Phase) GE1215 607C1-35 Oiling Device GE1910 607C1-31 Oiling Device - One Shot (For Old

Style 627 & 629 Models Only)

GE1373 664C1-3 Connecting Rod (1-3/4" Stroke) GE1372 664C1-4 Connecting Rod (1-1/2" Stroke) GE1371 664C1-5 Connecting Rod (1-1/4" Stroke) GE1370 664C1-6 Connecting Rod (1-1/8" Stroke) GE1357 706C1-4 ** Capacitor (110 Volt) GE1358 706C1-5 ** Capacitor (220 Volt)

706C1-13 * Capacitor (110 Volt) 706C1-18 * Capacitor (220 Volt)

* Class 627X Only ** Class 629X Only

Note: Number in parenthesis indicate quantity of a part required.

"Genuine" Parts For Eastman Straight Knives

Cutting Machines

Model 627X BRUTE

Model 629X BLUE STREAK II

FRONT BEARING HOUSING (90C2-162)

with Oiler Assembly

Universal Sewing Supply

1-314-862-0800 1011 East Park • St. Louis, Mo. 63130

+ 9 hidden pages