Page 1
9800B 2-Person
Earth Auger Powerhead
Operator’s Manual
All Rights Reserved. Printed in USA.
OM9800B
Revision 09/09/05
© Copyright 2005 Ardisam, Inc.
Page 2
ARDISAM
THANK YOU . . .THANK YOU . . .
THANK YOU . . .
THANK YOU . . .THANK YOU . . .
for purchasing an Earthquake Earth Auger Powerhead from
REGISTRATION AND WARRANTY
One Year
Ardisam, Inc. We guarantee that this powerhead conforms
to applicable North American safety standards, and have
worked to ensure that it meets high standards for usability
and durability . With proper care, your powerhead/auger will
provide many years of service. Please take the time to read
this manual carefully to learn how to correctly operate and
maintain your powerhead/auger. Congratulations on your
investment in quality .
CONTENTSCONTENTS
CONTENTS
CONTENTSCONTENTS
Registration/Warranty ........................................................ 2
Safety ................................................................................ 3
Operation ........................................................................ 4-5
Maintenance & Storage ..................................................6-7
Service, Troubleshooting, and Repair ........................... 8-11
MODEL IDENTIFICAMODEL IDENTIFICA
MODEL IDENTIFICA
MODEL IDENTIFICAMODEL IDENTIFICA
Your earth auger powerhead has a model/serial number
decal located on the side of the engine near the muffler.
Engine serial number is located on the top plate of the
muffler guard. Write these numbers and the model number in
the space provided. You will need these numbers if you order
parts.
Model Number __________________________________
Serial Number __________________________________
TIONTION
TION
TIONTION
Limited Warranty
The Ardisam, Inc., Manufacturing Company warrants
this Earthquake Model 9800B Powerhead to be free
from defects in material or workmanship. Conditions
of this warranty include:
What is covered under warranty:
Ardisam, Inc. will repair or replace any part defective
in workmanship or material within one year after
delivery of the powerhead to the original purchaser.
What is not covered under warranty:
This warranty applies only to products which have not
been repaired or altered outside our factory. It covers
only defects resulting from normal use, and does not
cover defects arising from misuse, alteration,
negligence, commercial use, or accident. This
warranty applies only to the original purchaser, and is
not transferrable.
How to obtain service:
Return the product to us at the address below with
transportation charges prepaid.
This warranty supersedes all other warranties
either expressed or implied and all other
obligations or liabilities on our part. Ardisam,
Inc., does not assume, and does not authorize
any other person to assume for us, any liability
in connection with the sale of our products. This
guarantee is void unless warranty card is
properly filled out and returned to Ardisam, Inc.,
Cumberland, Wisconsin, at time of purchase.
ARDISAM, INC.
ARDISAM
1690 Elm Street; P.O. Box 666
Cumberland, Wisconsin 54829
Phone (715) 822-2415 Fax (715) 822-2223
1-800-345-6007
www.ardisam.com
Engine Serial Number ____________________________
Date of Purchase _______________________________
Place of Purchase _______________________________
WWW.ARDISAM.COM 1-800-345-6007
CALIFORNIA PROPOSITION 65 WARNING
Engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth
defects, or other reproductive harm.
Page 2
Page 3
SAFETY
ARDISAM
OWNER'S RESPONSIBILITYOWNER'S RESPONSIBILITY
OWNER'S RESPONSIBILITY
OWNER'S RESPONSIBILITYOWNER'S RESPONSIBILITY
Accurate assembly and safe and effective use of the earth
auger unit is the owner's responsibility.
1. Read and follow all safety instructions.
2. Carefully follow all assembly instructions.
3. Maintain the earth auger unit according to directions and
schedule included.
4. Ensure that anyone who uses the earth auger unit is
familiar with all controls and safety precautions.
CAUTIONS AND IMPORTCAUTIONS AND IMPORT
CAUTIONS AND IMPORT
CAUTIONS AND IMPORTCAUTIONS AND IMPORT
Two symbols which draw attention to information of special
interest appear throughout this manual. These comments
range in importance from helpful hints to warnings about
risk of personal injury. Please take the time to read and
understand them.
ANT NOANT NO
ANT NO
ANT NOANT NO
TESTES
TES
TESTES
CAUTION
Indicates a situation which may cause personal injury
or damage to the earth auger unit or property.
IMPORTIMPORT
IMPORT
IMPORTIMPORT
Please read this section carefully. Operate earth auger
unit according to safety instructions and recommendations
outlined here and inserted throughout the text. Make sure
anyone who uses the earth auger unit has read the
instructions and is familiar with the controls.
1. The earth blade is very sharp. Use extreme caution
when drilling a hole or replacing the blade.
2. Do not carry the earth auger unit between holes with the
engine running.
3. The auger should not rotate when the engine is idling. If
it does rotate when engine is idling, contact Ardisam, Inc.
for instructions.
4. Always keep hands and feet clear of rotating auger.
5. Do not wear loose clothing while operating the earth
auger unit.
ANT SAFETY PRECAUTIONSANT SAFETY PRECAUTIONS
ANT SAFETY PRECAUTIONS
ANT SAFETY PRECAUTIONSANT SAFETY PRECAUTIONS
This symbol points out important safety
instructions which if not followed could
endanger your personal safety. Read and
follow all instructions in this manual and any
others provided with this equipment.
Provides helpful information for proper assembly,
operation, or maintenance of your earth auger unit.
6. Do not allow children to operate this earth auger unit. Do
not operate the earth auger unit without proper instruction.
7. Do not operate any power equipment under the
influence of alcohol or drugs.
WWW.ARDISAM.COM 1-800-345-6007
Page 3
Page 4
ARDISAM
OPERATION
REGISTRAREGISTRA
REGISTRA
REGISTRAREGISTRA
Complete and return. Your powerhead has a model/serial
number decal located on the muffler side of the engine.
Record this number and the model number in the space
provided on page 2 of this manual. You will need these
numbers if you order parts. Fill out and mail the registration
card located in your parts packet. Warranty is valid only if
your completed registration card is received by Ardisam,
Inc., at time of purchase.
SPSP
ARK PLARK PL
SP
ARK PL
SPSP
ARK PLARK PL
If your powerhead does not have the spark plug already
installed for you. You will have to install it following the
instructions given below.
1. Locate the spark plug in the parts packet.
2. With powerhead laying on side labeled "THIS SIDE UP
WHEN NOT IN USE," place spark plug in spark plug hole.
For replacement use Champion RC-12YC only.
NOTE: A resistor spark plug must be used for
replacement.
3. Turn by hand until snug.
TION FORMTION FORM
TION FORM
TION FORMTION FORM
UG INSTUG INST
UG INST
UG INSTUG INST
ALLAALLA
ALLA
ALLAALLA
TIONTION
TION
TIONTION
OPERAOPERA
OPERA
OPERAOPERA
TIONTION
TION
TIONTION
CAUTION
Please do not start your earth auger unit until you
have read the Engine Manual that came with your
engine, and the section in this manual titled Safety. If
you have read these, follow the steps below to start
your earth auger unit. Always perform pre-start
checklist before starting the engine.
1. Read engine manual and follow instructions for fuel type,
starting, etc.
2. The clutch will transfer maximum power after about two
hours of normal operation. During this break-in period clutch
slippage may occur. The clutch should be kept free of oil or
other moisture for efficient operation. Each powerhead is
tested at the factory, but is not operated for the full break-in
period.
3. The earth auger unit should be operated no more than 20
degrees in any direction during continuous use and limited
to 30 degrees intermittently. Recommended for adequate
lubrication and fuel delivery.
4. Use a wrench or socket to tighten to 180 in-lbs. of torque.
DO NOT OVERTIGHTEN.
CAUTION
It is recommended that the earth auger unit not be
tilted at more than a 30
position. Failure to do so can cause fuel and/or oil
leakage.
4. When digging in heavy soil, pump the earth auger unit
with an up and down motion in the hole for every one foot of
depth.
5. Never run engine indoors. Exhaust fumes are deadly.
6. Do not use an earth auger in ice.
°°
° angle from the upright
°°
WWW.ARDISAM.COM 1-800-345-6007
Page 4
Page 5
OPERATION
PRE-PRE-
STST
PRE-
PRE-PRE-
1. Read and understand the engine manual and operator's
manual that came with your unit.
2. Fill oil sump or check oil level. Check oil level often
during engine break-in.
3. Fill fuel tank. Use unleaded, regular gasoline.
ART CHECKLISTART CHECKLIST
ST
ART CHECKLIST
STST
ART CHECKLISTART CHECKLIST
NEVER MIX OIL WITH GASOLINE.
ARDISAM
CAUTION
Temperature of muffler and near by areas may exceed
150° F. Avoid these areas.
To Start Engine:
1. Open fuel shut-off valve.
2. Flip the on/off switch to on position.
3. Move choke lever to the choke position.
NOTE: Do not use the choke to restart a warm engine
after a short shut down.
CAUTION
Never add gas when engine is running or hot from
operation. Never fill the tank indoors. Do not smoke
when filling fuel tank.
CAUTION
Never fill fuel tank completely. Fill tank to 1/2" below
bottom of filler neck to provide space for fuel
expansion. Wipe any fuel spillage from engine and
equipment before starting engine.
4. Be sure spark plug wire is attached to spark plug.
STST
ARTING AND STARTING AND ST
ST
ARTING AND ST
STST
ARTING AND STARTING AND ST
OPPINGOPPING
OPPING
OPPINGOPPING
CAUTION
Do not hold throttle lever wide open while starting.
Loss of control of powerhead/auger could result.
CAUTION
4. Grasp starter handle and pull rope out, slowly, until it
pulls slightly harder. Let rope rewind slowly. Then pull rope
with a rapid full arm stroke. Let rope return to starter slowly.
5. When engine fires or starts running, gradually move the
choke lever back to the run position.
To Stop Engine:
1. Flip the on/off switch to the off position.
2. Close fuel shut-off valve.
CAUTION
Before storing unit, disconnect spark plug wire from
spark plug and attach it to retaining post.
CAUTION
Never store engine with fuel in tank indoors or in
enclosed, poorly ventilated areas, where fuel fumes
may reach an open flame, spark or pilot light.
Never run engine indoors or in enclosed, poorly
ventilated areas. Engine exhaust contains carbon
monoxide, an odorless and deadly gas.
CAUTION
Keep hands, feet, hair and loose clothing away from
any moving parts on engine and equipment.
WWW.ARDISAM.COM 1-800-345-6007
Page 5
Page 6
ARDISAM
CAUTION
MAINTENANCE AND STORAGE
ENGINE MAINTENANCEENGINE MAINTENANCE
ENGINE MAINTENANCE
ENGINE MAINTENANCEENGINE MAINTENANCE
To prevent accidental starting:
Engine must be turned off and cool, and spark plug
wire must be removed from spark plug before
checking and adjusting engine or equipment.
MAINTENANCE AND STORAGE SAFETYMAINTENANCE AND STORAGE SAFETY
MAINTENANCE AND STORAGE SAFETY
MAINTENANCE AND STORAGE SAFETYMAINTENANCE AND STORAGE SAFETY
1. Always allow muffler to cool before filling fuel tank.
2. When storing for over one (1) month, use gas stabilizer
in fuel.
3. Do not fill gas tank indoors or when engine is running or
is hot.
4. The gear case has four (4) oz. of grease installed at the
factory. It is recommended that once a year the gear case
be split and the grease level checked. Add grease only if
level of grease is below top of the gears. DO NOT
OVERFILL.
5. For cold weather operation, store the unit in a cool
environment. Transferring the unit from a warm to a cold
place can cause the build up of harmful condensation.
CAUTION
Do not operate auger before reading the engine
manual provided in the parts packet.
Engine can overheat and become damaged if debris
blocks the cooling fins or recoil housing.
Refer to the engine manual included in your parts packet
for information on engine maintenance. Your engine manual
provides detailed information and a maintenance schedule
for performing the following tasks:
1. Check oil level every five (5) operating hours and before
each use.
2. Change oil after first two (2) operating hours and every
25 operating hours thereafter, more often if operated in
extremely dusty or dirty conditions. Change oil while
engine is still warm from recent running.
3. Frequently remove dirt and debris from cooling fins, air
intake screen, levers and linkage. This will help ensure
adequate cooling and correct engine speed.
4. Check air cleaner.
Never run engine without complete air cleaner
installed on engine.
5. Check spark plug yearly or every 100 operating hours.
6. Check engine and auger often for loose nuts and bolts.
WWW.ARDISAM.COM 1-800-345-6007
Page 6
Page 7
MAINTENANCE AND STORAGE
ARDISAM
STORAGESTORAGE
STORAGE
STORAGESTORAGE
CAUTION
Do not store earth auger unit with fuel in tank indoors
or in enclosed, poorly ventilated areas, where fuel
fumes may reach an open flame, spark, pilot light or
an ignited object. Drain fuel outdoors away from any
ignition sources. Use only approved fuel containers.
CAUTION
FOR LONG TERM STORAGE: Close fuel shut-off
valve and store earth auger unit in an upright
position. Failure to do so can cause oil leakage over
a prolonged period.
Follow the steps below to prepare your earth auger unit for
storage. Read your engine manual for detailed instructions
on preparing the engine for storage.
1. Run with gas stabilizer in fuel. Screen in carburetor will
glaze shut if gas stabilizer is not used before storage.
2. Drain the fuel system. Run the engine until it stops.
3. Change oil.
4. Remove spark plug, pour one (1) ounce of clean engine
oil into spark plug hole. Cover hole with a rag. Pull starter
handle slowly several times to distribute oil. Install spark
plug. Do not connect spark plug wire.
5. Clean entire earth auger unit.
6. Store your earth auger unit in a clean, dry building that is
inaccessible to children.
WWW.ARDISAM.COM 1-800-345-6007
Page 7
Page 8
ARDISAM
SERVICE, TROUBLESHOOTING AND REPAIR
SERVICE INFORMASERVICE INFORMA
SERVICE INFORMA
SERVICE INFORMASERVICE INFORMA
IN CASE OF A SERVICE PROBLEM, DO NOT SEND
EARTH AUGER UNIT BACK TO RETAILER. CONTACT
ARDISAM, INC. AT 1-800-345-6007.
At Ardisam, we build quality and durability into the design
of our products; but no amount of careful design by us,
and careful maintenance by you, can guarantee a repair-
free life for your earth auger unit. Most repairs will be
minor, and easily fixed by following the suggestions in
the troubleshooting guide in this section. The guide will
help you pinpoint the causes of common problems and
identify remedies.
For more complicated repairs, you may want to rely on
your retailer or an authorized mechanic (contact your
retailer for a list of authorized mechanics in your area). A
parts catalog is included in this section.
TIONTION
TION
TIONTION
ORDERING REPORDERING REP
ORDERING REP
ORDERING REPORDERING REP
Parts can be obtained from the store where your earth
auger powerhead was purchased or direct from the
factory. To order from the factory, call or write to:
AIR PARTSAIR PARTS
AIR PARTS
AIR PARTSAIR PARTS
ARDISAM, INC.
ARDISAM
Please include the following information with your order:
1. Part numbers
2. Part description
3. Quantity
4. Model number and serial number
1690 Elm Street; P.O. Box 666
Cumberland, Wisconsin 54829
Phone (715) 822-2415 Fax (715) 822-2223
1-800-345-6007
www.ardisam.com
We will always be glad to answer any questions you have,
or help you find suitable assistance. To order parts or
inquire about warranty, call or write us at the address
found in the next column under the section ordering repair
parts.
WWW.ARDISAM.COM 1-800-345-6007
Page 8
Page 9
SERVICE, TROUBLESHOOTING AND REPAIR
TROUBLESHOOTINGTROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTINGTROUBLESHOOTING
CAUTION
Practice safety at all times. Engine must
be turned off and allowed to cool, and
spark plug wire must be disconnected
before attempting any maintenance or
repair.
Problem Possible cause Remedy/Action
ARDISAM
Engine will not start
Engine runs rough, floods during operation
Engine is hard to start
Engine misses or lacks power
Auger turns at idle
Auger turns, but has no power
1. Power switch off
2. Spark plug wire disconnected
1. Dirty air cleaner
2. Carburetor out of adjustment
1. Stale fuel
2. Spark plug wire loose
3. Dirty carburetor
1. Clogged fuel tank
2. Clogged air cleaner
3. Improper carburetor adjustment
4. Spark plug dirty, improper gap, or wrong
type
1. Idle speed too high
2. Broken clutch spring
1. Carburetor out of adjustment
2. Broken transmission
3. Worn clutch shoes
4. Worn engine lower seal
1. Flip switch to on position
2. Connect spark plug wire to spark plug
1. Clean or replace air cleaner
2. Take to authorized Briggs & Stratton service
center
1. Drain old fuel and replace with fresh. Use
gas stabilizer at end of season
2. Make sure spark wire is securely attached to
spark plug
3. Clean carburetor, use gas stabilizer, new gas
can
1. Remove and clean
2. Clean or replace
3. Take to authorized Briggs & Stratton service
center
4. Replace spark plug and adjust gap
1. Adjust idle speed lower
2. Replace both springs
1. Take to authorized Briggs & Stratton service
center
2. Return to factory
3. Replace clutch shoes and springs
4. Take to authorized Briggs & Stratton service
center
Auger cuts slowly
Engine runs, then quits
WWW.ARDISAM.COM 1-800-345-6007
1. Damaged point
1. Screen in carburetor plugged
Page 9
1. Buy a new fishtail point
1. Clean screen, use gas stabilizer, clean gas
can
Page 10
ARDISAM
EARTHQUAKE MODEL 9800B
WWW.ARDISAM.COM 1-800-345-6007
Page 10
Page 11
ARDISAM
EARTHQUAKE MODEL 9800B
MINIMUM ORDER ...................................................................................................................... $10.00
PART # DESCRIPTION QTY.
60G56 LOCKNUT, BI-WAY 5/16-18 ........................................ 8
420 BOLT, C-BORE 5/16-24 X 3/4" ..................................... 4
500 GAS ENGINE, BRIGGS & STRATTON 5 HP ............. 1
503 BOLT, HEX HD 5/16-18 X 1-1/2" ................................. 4
4819 TRIGGER ASSEMBLY LONG THROW ...................... 1
8655 BOLT, HEX HD 5/16-18 X 1-3/4" ................................. 4
8906WC SCREW, PHILLIPS PAN 10-32 X 1-1/4" ....................... 1
8912 GEAR, 44T 3/4" HOLE .................................................. 1
8913 SHAFT, OUTPUT 7/8" .................................................. 1
8914 GEAR, 48T HARD ......................................................... 1
8915 DOWEL PIN, STEEL 1/4" X 1/2" .................................. 2
8919 GASKET-POWERHEAD TRANSMISSION................ 1
8922 BEARING, BALL R12 DOUBLE LIP ........................... 3
8923 BEARING, BALL R10 ................................................... 2
8924 RING, SNAP EXTERNAL 3/4" ..................................... 3
8929 BOLT, SHCS, 1/4-20 X 1-1/2" ........................................ 2
(gear case bottom to gear case top)
8935 BOLT, SHCS 1/4-20 X 2-1/2" ......................................... 4
(gear case to handlebar plate)
PART # DESCRIPTION QTY.
8939 GEAR CASE, LOWER HALF ....................................... 1
9018 CLUTCH DRUM ........................................................... 1
9038 GEAR CASE, UPPER HALF ......................................... 1
9211 HANDLE GRIP, 7/8" ID FLANGELESS ....................... 4
9214A GEAR, 10T CLUSTER PINION HT ............................. 1
9811 SWITCH, ON/OFF (Not Shown) ................................... 1
9814 GEAR, 7T PINION THREADED ................................. 1
9816 HANDLE, 2-HOLES ...................................................... 3
9817 HANDLE, 3-HOLES ...................................................... 1
9819 MAIN HANDLEBAR ASSEMBLY .............................. 1
9825 ROTOR, CENTRIFUGAL CLUTCH COMPLETE ..... 1
9837A MOUNT RING .............................................................. 1
53627 CABLE, THROTTLE 43-1/2" ........................................ 1
63124 SPRING, THROTTLE EXTENSION ............................ 1
GC5020 GAS CAP, BRIGGS 5HP ............................................... 1
GT5HPB GAS TANK ASSEMBLY, BRIGGS 5HP ....................... 1
WK6 WOODRUFF KEY #6 .................................................... 1
WWW.ARDISAM.COM 1-800-345-6007
Page 11
Page 12
Ardisam, Inc.
1690 Elm Street, Cumberland, Wisconsin 54829
Phone (715)822-2415 • Fax (715)822-2223
1-800-345-6007
Email info@ardisam.com
www.ardisam.com
Loading...