Earlex SPRAY STATION User Manual

L0482 01-07.qxd 25/7/08 10:36 am Page 1
SPRAY STATION
THE COMPLETE PAINT SPRAYING KIT
OPERATING INSTRUCTIONS
Thank you for purchasing the Earlex Spray System kit.
This is a highly versatile spray kit and can be used on
a variety of applications.
BEFORE USE - PLEASE READ THE SAFETY &
OPERATING INSTRUCTIONS.
Please retain for future reference
EARLEX LTD. WILL ACCEPT NO RESPONSIBILITY FOR THE USE OF THIS
DETAILED HEREIN
2
SAFETY OPERATING INSTRUCTIONS
PLEASE READ BEFORE USE
l NEVER under any circumstances aim the nozzle at another person or animal.
In the event of injury occurring seek expert medical advice immediately.
l The spray gun must only be used with paints and solvents that have a
suitable flash point for spraying. If in doubt consult paint or solvent
manufacturer’s data.
l Always ensure there is adequate ventilation when spraying.
l NEVER spray near a naked flame, including appliance pilot flame.
l NEVER smoke whilst spraying.
l NEVER allow children to operate or play with the spray gun.
l Always read the paint manufacturer’s thinning instructions before using.
l Always disconnect unit from mains supply when refilling the paint container.
l Before cleaning, always disconnect unit from the mains supply.
l Always wear the correct protective face mask when spraying. We would also
recommend the use of gloves, goggles and overalls.
l After every use ensure that you clean your spray gun thoroughly and grease
the gland packing.
l
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
l Use only genuine manufacturer replacement parts.
l Earlex recommend the use of appropriate ear protection when using this
product.
l Sound pressure level: 85dB(A)
WARNING: The substances used with this spray gun (paint, thinners etc) may contain hazardous, harmful, explosive or corrosive materials. ALWAYS COMPLY WITH THE SAFETY INSTRUCTIONS ISSUED WITH THIS PRODUCT AND THE MATERIAL BEING USED.
Only use the unit as detailed in these instructions.
L0482 01-07.qxd 25/7/08 10:36 am Page 2
L0482 01-07.qxd 25/7/08 10:36 am Page 3
EXPLODED PARTS VIEW
PARTS LIST
Key Description Part No.
01. Air Cap Ring L0215
02. Air Cap L0205
03. Spray Direction Plate L0206
04. Fluid Tip (2.0mm) L0237
05. Fluid Tip Seal L0211
06. Trigger Pin L0209
07. Trigger L0202
08. Fluid Needle (2.0mm) L0236
6120LgnirpS .90
IF YOU HAVE ANY PROBLEMS WITH YOUR SPRAY GUN OR IF YOU BELIEVE A PART IS MISSING, DO NOT RETURN TO STORE. PLEASE CONTACT EARLEX LTD ON 01483 454666.
Key Description Part No.
10. Fluid Adjusting Screw L0210
11. Gland Nut L0208
12. Gland Seal L0272
13. Paint Feed Tube L0214
14. Paint Container Seal L0335
15. Paint Container L0201
16. Hose Assembly L0291
17. Viscosity Cup SG243
0920LretliF .81
3
Loading...
+ 5 hidden pages