Eagle SSC User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

LIFESTOR®Shelving
Accessories

enclosure

panel

Enclosure Panels

3˝ (76mm) grid. Panels attach to shelf via six 14 gauge stainless steel
clips. Flat screwdriver required for installation. 6 gauge steel wire with
Valu-Gard

post height post height post height height weight

LSE1254-VG LSE1263-VG LSE1274-VG 12˝ 305 6 2.7
LSE1854-VG LSE1863-VG LSE1874-VG 18˝ 457 9 4.1

PANEL ORDERING REQUIREMENTS

(Panels for 63˝-high posts used as an example below)

®

green epoxy finish.

for 54˝ for 63˝ for 74˝ post

model # model # model # in. mm lbs. kg

shelf width enclosure panel

in. mm model # qty

18˝ 457 LSE1263-VG 1
23˝ 584 LSE1863-VG 1

shelf length enclosure panel
in. mm model # qty

24˝ 610 LSE1263-VG 1
30˝ 762 LSE1863-VG 1
36˝ 914 LSE1263-VG 2
42˝ 1067 LSE1863-VG 2
48˝ 1219 LSE1863-VG 2
54˝ 1372 LSE1263-VG 4
60˝ 1524 LSE1863-VG 3

EG01.12D

LIFESTOR

®

Shelving Accessories

Wall Brackets

LIFESTOR®shelves can now be mounted to the wall! Each bracket
consists of one single shelf support and one mounting plate. 6 gauge
steel wire with Valu-Gard

model # in. mm lbs. kg

wall bracket

EAGLE GROUP

LWB18-VG 18˝ 457 10 4.5
LWB23-VG 23˝ 584 14 6.4

Certifications / Approvals

100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: [phone] • Fax: [phone] • e-mail: [e-mail]

on Enclosure Panels,
Dividers, and Ledges.

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group

®

green epoxy finish.

for shelf width weight

EG01.12D Rev. 03/09

EG01.12D

LIFESTOR®Shelving Accessories

All accessories are made of 6 gauge steel wire with Valu-Gard

Item No.:

Project No.:

S.I.S. No.:

®

green epoxy finish for longer life.

Dividers

8˝ (203mm) height. Dividers snap onto shelf via two 16 gauge
stainless steel clips.

model # in. mm lbs. kg

LSD18-VG 18˝ 457 1.3 0.6
LSD23-VG 23˝ 584 1.8 0.8

width weight

Catalog Specification Sheet No.

Shelving Accessories

®

LIFESTOR

divider

tote slide system

ledge

shelf slide clip

Ledges…

Ledges snap over post without tools.

…FRONT-TO-BACK LEDGES

1˝ (25mm) 4˝ (102mm) width weight

model # model # in. mm lbs. kg

LSL18-1VG LSL18-4VG 18˝ 457 0.5 0.2
LSL23-1VG LSL23-4VG 23˝ 584 0.6 0.3

…SIDE-TO-SIDE LEDGES

1˝ (25mm) 4˝ (102mm) width weight

model # model # in. mm lbs. kg

LSL24-1VG LSL24-4VG 24˝ 584 0.6 0.3
LSL30-1VG LSL30-4VG 30˝ 762 0.7 0.3
LSL36-1VG LSL36-4VG 36˝ 914 0.8 0.3
LSL42-1VG LSL42-4VG 42˝ 1067 0.9 0.3
LSL48-1VG LSL48-4VG 48˝ 1219 1.0 0.4
LSL54-1VG LSL54-4VG 54˝ 1372 1.2 0.5
LSL60-1VG LSL60-4VG 60˝ 1524 1.4 0.5

Tote Slide Systems

Only available for 23˝ (584mm) wide shelves. System is suspended
from the unit’s rails via four shelf slide clips (sold separately).

model # in. mm in. mm in. mm lbs. kg

TS1421 14˝ 356 215⁄8˝ 683 101⁄4˝ 260 5.0 2.3
TS2021 20˝ 508 215⁄8˝ 683 101⁄4˝ 260 4.7 2.1

SHELF SLIDE CLIPS FOR TOTE SLIDE SYSTEMS

Set of four.

model # lbs. kg

SSC 0.5 0.2

width length depth weight

weight

Tray Drying Racks

Fits 48˝ (1219mm) shelves or longer. Fits both shelf widths. Features
14 or 28 holding slots. Constructed of 6 gauge wire with green epoxy
coating. Available with either 1
for bun pans, cutting boards, server trays and pizza pans.

drying racks

18˝ RACKS 23˝ RACKS spacing number

model # model # in. mm of slots

TR18481-VG TR23481-VG 11⁄2˝ 37 28
TR18483-VG TR23483-VG 3˝ 76 14

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

1

⁄2˝ or 3˝ (38 or 76mm) spacing. Perfect

©2009 by Eagle Group

Printed in U.S.A.

Rev. 03/09