Eagle SMPT30108 User Manual

Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Spec-Master®Marine Prep Table, model ____________. Top to be 14/304 stainless steel with box marine edge on front and sides, and 10˝ backsplash with a 2˝ return at 45˚ and
®
turned down 1˝. Constructed with uni-lok
patented gusset system with the gussets recessed into the hat channels to reduce lateral movement. Two 24˝ x 18˝ x 12˝ deep stainless steel sinks with lever drains, overflows and brackets. Heavy gauge stainless steel undershelf with 2˝ upturn at rear welded to leg assemblies. 20˝ x 20˝ x5˝ stainless steel drawer, and 16˝
1
x 24˝ x
2˝ poly cutting board on stainless steel slides welded on outside of unit. Stainless steel tubular legs with stainless steel adjustable bullet feet.
SpecMaster®Marine prep table
Spec-Master®Marine Prep Tables
MODELS:
SMPT3096 SMPT30108 SMPT30132 SMPT30144
Tabletop
• 14 gauge type 304 stainless steel.
• Stainless steel gussets with uni-lok (patent #5,165,349).
• Full-perimeter underside channeling.
• Box marine edges on front and each end.
• 10˝ (254mm)-high backsplash with downturn.
• T&S faucet mounted on backsplash, on 8˝ (203mm) center lines.
• NSF-approved drawer with integrated full-length front pull flange.
®
design
EG10.34
Spec-Master
®
Marine Prep Tables
Patented uni-lok®System
(Patent No. 5,165,349)
Legs
• Stainless steel 1
5
8˝ (41mm) diameter.
• Stainless steel flanged adjustable feet.
Other features
• Heavy gauge type 304 stainless steel undershelf with 2˝ (51mm) rear upturn welded to leg assembly.
• Sink features two 24˝ x 18˝ x 12˝ (610 x 457 x 305mm) sink bowls with twist handle drains, overflows and brackets.
• 20˝ x 20˝ x 5˝ (508 x 508 x 127mm) NSF-approved stainless steel drawer with full-length front pull flange.
1
2˝ (13mm)-thick poly cutting board is 16˝ x 24˝ (406 x
Options / Accessories
Lock Overshelves
Receptacles Pot Rack
610mm), with set of slides welded to outside of unit.
Certifications / Approvals
100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com
Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
EG10.34 Rev. 10/08
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
EG10.34
Spec-Master®Marine Prep Tables
Catalog Specification Sheet No.
(NOTE: UNDERSIDE CHANNELS SHOWN)
TOP VIEW
Item No.:
Project No.:
S.I.S. No.:
Marine Prep Tables
®
Spec-Master
BOX MARINE EDGE DETAIL
FRONT VIEW SIDE VIEW
model # SMPT30108 shown
width length weight
model # in. mm in. mm lbs. kg
SMPT3096 30˝ 762 96˝ 2438 452 205.0 SMPT30108 30˝ 762 108˝ 2743 480 217.7 SMPT30120 30˝ 762 120˝ 3048 555 251.8 SMPT30144 30˝ 762 144˝ 3658 591 268.1
BACKSPLASH DETAIL
Foodservice Division: Phone 800-441-8440
©2008 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 10/08
Loading...