Eagle Herman Miller Installation Manual
PART #327536
Case Cart – Herman Miller
ASSEMBLY INSTRUCTIONS
CAUTION
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
Before assembly:
Remove all protective plastic covering from the stainless steel parts prior to installation of accessories.
rear
Step 1 - Install drawer/shelf supports.
• Install drawer/shelf supports by
engaging rear mounting boss into
slot at rear of cart and engage front
mounting boss into keyhole slot at
front of cart.
front
mounting
boss
mounting
boss
keyhole
slot
rear slot
Step 2 - Install shelves.
• Install either wire framed or
sheet metal shelf onto top lip of
drawer/shelf support and slide
shelf toward rear wall of cart.
• Allow shelf stop to drop down
and align with center channel
of support.
top lip of
drawer/shelf
support
dr
awer/shelf
t
suppor
shelf
center
channel
shelf
stop
drawer/shelf
support
Step 3 - Install drawers.
• Install drawer
onto lower lip of
drawer/shelf
supports, and slide
drawer toward rear
wall of cart.
drawer/shelf
suppor
t
lower lip
Eagle F
See reverse side for information on casters.
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065 or 302/653-3036
vice Equipment, Eagle MHC
oodser
, SpecF
, and Retail Displa
AB
y are divisions of Eagle Group
.eaglegrp.com
2005 by the Eagle Group
©
.
Assembly is complete.
EG9885 Re
vised 10/05
Case Cart – Herman Miller
ASSEMBLY INSTRUCTIONS
To operate casters with brakes:
Press braking lever down to lock caster. Press brake pad down
to unlock caster.
breaking
lever
break release pad
ked
unloc
position
locked
position
Special Caster Information
To operate swivel lock casters:
Rotate locking arm clockwise 90˚ to align caster wheel to lock
caster swivel.
caster wheel
(top view of caster)
locking arm
locked
position
unlocked position
Note: Chrome and stainless steel casters are equipped
with grease seals and lubricating zerk fittings to
improve operation and increase life of caster.
Caster Maintenance
• Establish a regular schedule to inspect all cart casters after cart washings and lubricate casters, as needed.
• Caster lubrication may be required after each cart washing.
• Stainless steel casters will require less maintenance in frequent cart washings.
Caster Lubrication
Lubricate cart casters with special high temperature, water resistant lubricants only
•
• Use standard lubrication practices and tools.
.
Eagle F
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodser
vice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065 or 302/653-3036
AB, and Retail Display are divisions of Eagle Group. ©2005 by the Eagle Group
vice Equipment, Eagle MHC
oodser
, SpecF
Loading...