Eagle GDI-2-208 User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Electric Hot Food Gang Drop-In Unit, model
____________. Heavy gauge stainless steel top with
overhang on all four sides. Galvanized steel body surrounded
with fiberglass insulation. Each heated well accommodates a
12˝ x 20˝ food pan, and features a 750-watt exposed heating
element. All units feature infinite controls, with high and low
selections plus eight other temperature settings. Controls are
recessed into control panel.
Electric Hot Food Gang
Drop-In Units
MODELS:
GDI-2-208
GDI-2-240
Top and Body
• 22 gauge type 430 stainless steel top with 1˝ (25mm)
overhang on all four side with reinforced angles.
• 20 gauge galvanized steel wraparound.
Heat Compartments
• Each heat compartment accommodates a 12˝ x 20˝ (305 x
508mm) food pan.
• 750-watt exposed rectangular-shaped heating element per
heat compartment.
• Fiberglass insulation on all four sides and bottom, with
heating elements above the insulated bottom.
GDI-3-208
GDI-3-240
GDI-4-208
GDI-4-240
GDI-5-208
GDI-5-240
EG35.13
Electric Hot Food Gang Drop-In Units
model # GDI-3-240 unit
Options / Accessories
Rolltop cover
Food pans/insets
Top adapters
Spillage pans
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-2065 • e-mail: quotes@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2013 by the Eagle Group
Controls
• All units feature infinite controls which offer high and low
selections along with eight other temperature settings.
• Control knobs are recessed into a one-piece, front-mounted
control panel.
Electrical
• Flexible conduit connecting the body enclosure and control
panel is 20˝ (508mm) on all models.
• All wiring terminates in a junction box.
• All units are single phase. Three-phase wiring available.
• ALL UNITS ARE DESIGNED FOR FIELD WIRING.
Certifications / Approvals
EG35.13 Rev. 06/13
EG35.13
Electric Hot Food Gang Drop-In Units
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
FRONT VIEW
(CONTROL PANEL)
SIDE VIEWTOP VIEW
(model #GDI-3-240 shown)
# of pan # of overall dimensions fits cutout measuring type of remote control panel(s),
openings panels in. mm in. mm and cutout dimensions electrical data model #
21261⁄16˝ x 331⁄2˝ 662 x 851 235⁄16˝ x 303⁄4˝ 592 x 781 double, 83⁄8˝ x 211⁄16˝ (213 x 68mm)
31261⁄16˝ x 487⁄8˝ 662 x 1241 235⁄16˝ x 461⁄8˝ 592 x 1172 triple, 1113⁄16˝ x 211⁄16˝ (300 x 68mm)
Electric Hot Food Gang Drop-In Units
42261⁄16˝ x 641⁄4˝ 662 x 1632 235⁄16˝ x 611⁄2˝ 592 x 1562 double, 83⁄8˝ x 211⁄16˝ (213 x 68mm)
52261⁄16˝ x 791⁄4˝ 662 x 2013 235⁄16˝ x 769⁄16˝ 592 x 1945
Spillage Pans required for wet application…
• Deep-drawn, fully-coved.
1
⁄2˝ (165mm) deep.
• 6
description lbs. kg model #
stainless steel 7 3.2 302027
aluminum 3 1.4 304141
weight
double—83⁄8˝ x 211⁄16˝ (213 x 68mm), 208V, 18.0A, 3750W GDI-5-208
& triple—11
NOTE: 240-volt units will not allow field wiring to 208 volts.
13
⁄16˝ x 211⁄16˝ (300 x 68mm) 240V, 15.6A, 3750W GDI-5-240
Replacement Recessed Control Panels
Punched. Stainless steel construction.
description in. mm model #
double 83⁄8˝ x 211⁄16˝ 213 x 68 305173
triple 1113⁄16˝ x 211⁄16˝ 300 x 68 305174
208V, 7.2A, 1500W GDI-2-208
240V, 6.25A, 1500W GDI-2-240
208V, 10.8A, 2250W GDI-3-208
240V, 9.38A, 2250W GDI-3-240
208V, 14.4A, 3000W GDI-4-208
240V, 12.5A, 3000W GDI-4-240
cutout dimensions
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
©2013 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 06/13
Loading...