Eagle FN2064-4-14-3, FN2064-4-18R User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Spec-Master
®
Four-Compartment Sinks, model
_____________. Unit constructed of 14/304, 18-8 stainless
5
steel throughout. Sink bowls coved with a full
⁄8˝ radius, and
shall have a 14˝ water level. Drainboards, when required, shall
1
be “V” creased for positive drainage. 9
⁄2˝ high backsplash with
1˝ upturn and tile edge. Legs to be 15⁄8˝ O.D., stainless steel,
with stainless steel gussets, stainless steel crossbracing and
adjustable stainless steel bullet feet.
4-compartment sink
Options / Accessories
Lever drain
Lever drain with overflow
Twist handle drains
Overflow hole
Faucets
Polyboard sink covers
Stainless steel sink covers
Skirted front panel
Sink kits
Spec-Master®FN Series Coved
Corner Four-Compartment Sinks
MODELS:
FN2064-4-*
FN2072-4-*
FN2080-4-*
* See table on back for complete model numbers.
Top:
• Drainboards, backsplash and rolled rims are 14 gauge type
304 stainless steel.
• Drainboards, when provided, are integrally welded.
• All rolled edges are highlighted for enhanced appearance.
1
⁄2˝ high backsplash with 1˝ upturn and tile edge.
• 9
1
⁄8˝ (29mm) faucet holes punched on 8˝ (203mm) centers.
• 1
Base:
• Legs: 15⁄8˝ (41mm)-diameter stainless steel tubing with
stainless steel gussets and fully adjustable stainless steel
bullet feet.
• Crossbracing: Adjustable, 1
steel; running left-to-right and front-to-back.
• Leg locations fall directly under sink bowls, providing
increased stability and maximum weight support.
• Leg gussets welded to a die-cut heavy-gauge stainless steel
reinforcing corner plate.
• Legs are crossbraced on all sides for increased stability.
FN2496-4-*
FN2880-4-*
1
⁄4˝ (32mm)-diameter stainless
EG20.35
Spec-Master
®
FN Series Coved Corner Four-Compartment Sinks
Assembly:
• Entire assembly is fuse-welded and planished, providing a
one-piece seamless sink unit.
• Welded areas are high-speed belt blended to match
adjacent surfaces with continuity of satin finish.
• All outside corners of assembly are bullnosed to provide
safe, clean edges.
• Water supply is
1
⁄2˝ (13mm) IPS for hot and cold lines.
EAGLE GROUP
Sink Bowls:
• 14 gauge type 304 stainless steel.
• 14˝ (356mm) water level, 17˝ (432mm) flood level.
5
• Sink compartments are coved on a full
⁄8˝ (41mm) radius
and constructed using state-of-the-art seamless welding
techniques.
1
• Basket-type waste drain fits sink bowls’ 3
⁄2˝ (89mm)
opening and features 11⁄2˝ (38mm) outlet.
Certifications / Approvals
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
EG20.35 Rev. 04/10
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group
Item No.:
Project No.:
EG20.35
S.I.S. No.:
Spec-Master®FN Series Coved Corner Four-Compartment Sinks
Drain location for rough-in
bowl bowl
width length Dimension A
in. mm
20˝ 508 16˝ 406 14˝ 356
20˝ 508 18˝ 457 14˝ 356
20˝ 508 20˝ 508 14˝ 356
24˝ 610 24˝ 610 16˝ 406
28˝ 711 20˝ 508 18˝ 457
Catalog Specification Sheet No.
in. mm
BOWL DIMENSIONS DRAINBOARD
model # in. mm in. mm quantity in. mm in. mm in. mm lbs. kg
FN2064-4-14/3 20˝ 508 16˝ 406 0-27˝ 686 75˝ 1905 121 54.9
FN2064-4-18R or L-14/3 20˝ 508 16˝ 406 1 18˝ 457 27˝ 686 91
FN2064-4-18-14/3 20˝ 508 16˝ 406 2 18˝ 457 27˝ 686 108˝ 2743 159 72.1
FN2064-4-24R or L-14/3 20˝ 508 16˝ 406 1 24˝ 610 27˝ 686 97
FN2064-4-24-14/3 20˝ 508 16˝ 406 2 24˝ 610 27˝ 686 120˝ 3048 171 77.6
FN2064-4-30R or L-14/3 20˝ 508 16˝ 406 1 30˝ 762 27˝ 686 104˝ 2642 151 68.5
FN2064-4-30-14/3 20˝ 508 16˝ 406 2 30˝ 762 27˝ 686 132˝ 3353 181 82.1
FN2064-4-36R or L-14/3 20˝ 508 16˝ 406 1 36˝ 914 27˝ 686 109
FN2064-4-36-14/3 20˝ 508 16˝ 406 2 36˝ 914 27˝ 686 144˝ 3658 201 91.2
FN2072-4-14/3 20˝ 508 18˝ 457 0-27˝ 686 83˝ 2108 132 59.9
FN2072-4-18R or L-14/3 20˝ 508 18˝ 457 1 18˝ 457 27˝ 686 99
FN2072-4-18-14/3 20˝ 508 18˝ 457 2 18˝ 457 27˝ 686 116˝ 2946 170 77.1
FN2072-4-24R or L-14/3 20˝ 508 18˝ 457 1 24˝ 610 27˝ 686 105
FN2072-4-24-14/3 20˝ 508 18˝ 457 2 24˝ 610 27˝ 686 128˝ 3251 182 82.6
FN2072-4-30R or L-14/3 20˝ 508 18˝ 457 1 30˝ 762 27˝ 686 112˝ 2845 162 73.5
FN2072-4-30-14/3 20˝ 508 18˝ 457 2 30˝ 762 27˝ 686 140˝ 3556 192 87.1
FN2072-4-36R or L-14/3 20˝ 508 18˝ 457 1 36˝ 914 27˝ 686 117
FN2072-4-36-14/3 20˝ 508 18˝ 457 2 36˝ 914 27˝ 686 152˝ 3861 202 91.6
FN2080-4-14/3 20˝ 508 20˝ 508 0-27˝ 686 91˝ 2311 142 64.4
FN2080-4-18R or L-14/3 20˝ 508 20˝ 508 1 18˝ 610 27˝ 686 107
FN2080-4-18-14/3 20˝ 508 20˝ 508 2 18˝ 457 27˝ 686 124˝ 3150 180 81.6
FN2080-4-24R or L-14/3 20˝ 508 20˝ 508 1 24˝ 457 27˝ 686 113
FN2080-4-24-14/3 20˝ 508 20˝ 508 2 24˝ 610 27˝ 686 136˝ 3454 192 87.1
FN2080-4-30R or L-14/3 20˝ 508 20˝ 508 1 30˝ 762 27˝ 686 119
FN2080-4-30-14/3 20˝ 508 20˝ 508 2 30˝ 762 27˝ 686 148˝ 3759 202 91.6
FN2080-4-36R or L-14/3 20˝ 508 20˝ 508 1 36˝ 914 27˝ 686 125
FN2080-4-36-14/3 20˝ 508 20˝ 508 2 36˝ 914 27˝ 686 160˝ 4064 212 96.2
FN2496-4-14/3 24˝ 610 24˝ 610 0-31˝ 787 107˝ 2718 163 73.9
FN2496-4-18R or L-14/3 24˝ 610 24˝ 610 1 18˝ 457 31˝ 787 123
FN Series Coved Corner Four-Compartment Sinks
®
FN2496-4-18-14/3 24˝ 610 24˝ 610 2 18˝ 457 31˝ 787 140˝ 3556 201 91.2
FN2496-4-24R or L-14/3 24˝ 610 24˝ 610 1 24˝ 610 31˝ 787 129
FN2496-4-24-14/3 24˝ 610 24˝ 610 2 24˝ 610 31˝ 787 152˝ 3861 213 96.6
FN2496-4-30R or L-14/3 24˝ 610 24˝ 610 1 30˝ 762 31˝ 787 135
FN2496-4-30-14/3 24˝ 610 24˝ 610 2 30˝ 762 31˝ 787 164˝ 4166 228 103.4
FN2496-4-36R or L-14/3 24˝ 610 24˝ 610 1 36˝ 914 31˝ 787 141
FN2496-4-36-14/3 24˝ 610 24˝ 610 2 36˝ 914 31˝ 787 176˝ 4470 233 105.7
FN2880-4-14/3 28˝ 711 20˝ 508 0-35˝ 889 91˝ 2311 170 77.1
FN2880-4-18R or L-14/3 28˝ 711 20˝ 508 1 18˝ 457 35˝ 889 107
Spec-Master
FN2880-4-18-14/3 28˝ 711 20˝ 508 2 18˝ 457 35˝ 889 124˝ 3150 208 94.3
FN2880-4-24R or L-14/3 28˝ 711 20˝ 508 1 24˝ 610 35˝ 889 113
FN2880-4-24-14/3 28˝ 711 20˝ 508 2 24˝ 610 35˝ 889 136˝ 3454 220 99.8
FN2880-4-30R or L-14/3 28˝ 711 20˝ 508 1 30˝ 762 35˝ 889 119
FN2880-4-30-14/3 28˝ 711 20˝ 508 2 30˝ 762 35˝ 889 148˝ 3759 230 104.3
FN2880-4-36R or L-14/3 28˝ 711 20˝ 508 1 36˝ 914 35˝ 889 125
FN2880-4-36-14/3 28˝ 711 20˝ 508 2 36˝ 914 35˝ 889 160˝ 4064 240 108.9
width length length width length weight
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
OVERALL DIMENSIONS
1
⁄2˝ 2324 140 63.5
1
⁄2˝ 2477 146 66.2
1
⁄2˝ 2781 166 75.3
1
⁄2˝ 2527 151 68.5
1
⁄2˝ 2680 157 71.2
1
⁄2˝ 2985 167 75.8
1
⁄2˝ 2731 161 73.0
1
⁄2˝ 2883 167 75.8
1
⁄2˝ 3035 172 78.0
1
⁄2˝ 3188 177 80.3
1
⁄2˝ 3137 182 82.6
1
⁄2˝ 3289 188 85.3
1
⁄2˝ 3442 193 87.5
1
⁄2˝ 3594 198 89.8
1
⁄2˝ 2731 189 85.7
1
⁄2˝ 2883 195 88.5
1
⁄2˝ 3048 200 90.7
1
⁄2˝ 3188 205 93.0
Printed in U.S.A.
©2010 by Eagle Group
Rev. 04/10
Loading...