Eagle FN2048-3-14-3 User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Spec-Master
®
Three-Compartment Sinks, model
_____________. Unit constructed of 14/304, 18-8 stainless
5
steel throughout. Sink bowls coved with a full
⁄8˝ radius, and
shall have a 14˝ water level. Drainboards, when required, shall
1
be “V” creased for positive drainage. 9
⁄2˝ high backsplash with
1˝ upturn and tile edge. Legs to be 15⁄8˝ O.D., stainless steel,
with stainless steel gussets, stainless steel crossbracing and
adjustable stainless steel bullet feet.
3-compartment sink
(faucets not included)
Options / Accessories
Lever drain
Lever drain with overflow
Twist handle drains
Overflow hole
Faucets
Polyboard sink covers
Stainless steel sink covers
Skirted front panel
Sink kits
Assembly:
• Entire assembly is fuse-welded and planished, providing a
one-piece seamless sink unit.
• Welded areas are high-speed belt blended to match
adjacent surfaces with continuity of satin finish.
• All outside corners of assembly are bullnosed to provide
safe, clean edges.
• Water supply is
1
⁄2˝ (13mm) IPS for hot and cold lines.
Spec-Master®FN Series Coved
Corner Three-Compartment Sinks
MODELS:
FN2048-3-*
FN2054-3-*
FN2060-3-*
* See table on back for complete model numbers.
Top:
• Drainboards, backsplash and rolled rims are 14 gauge type
304 stainless steel.
• Drainboards, when provided, are integrally welded.
• All rolled edges are highlighted for enhanced appearance.
1
⁄2˝ high backsplash with 1˝ upturn and tile edge.
• 9
1
⁄8˝ (29mm) faucet holes** punched on 8˝ (203mm) centers.
• 1
Base:
• Legs: 15⁄8˝ (41mm)-diameter stainless steel tubing with
stainless steel gussets and fully adjustable stainless steel
bullet feet.
• Crossbracing: Adjustable, 1
steel; running left-to-right and front-to-back.
• Leg locations fall directly under sink bowls, providing
increased stability and maximum weight support.
• Leg gussets welded to a die-cut heavy-gauge stainless steel
reinforcing corner plate.
• Legs are crossbraced on all sides for increased stability.
Sink Bowls:
• 14 gauge type 304 stainless steel.
• 14˝ (356mm) water level, 17˝ (432mm) flood level.
• Sink compartments are coved on a full
and constructed using state-of-the-art seamless welding
techniques.
• Basket-type waste drain fits sink bowls’ 3
opening and features 11⁄2˝ (38mm) outlet.
** Three-compartment sinks with 20˝ x 16˝ (508 x 406mm) bowls have one set
of faucet holes. All others feature two sets of faucet holes.
FN2472-3-*
FN2860-3-*
1
⁄4˝ (32mm)-diameter stainless
5
⁄8˝ (41mm) radius
1
⁄2˝ (89mm)
EG20.34
Spec-Master
®
FN Series Coved Corner Three-Compartment Sinks
EAGLE GROUP
Certifications / Approvals
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
EG20.34 Rev. 04/10
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group
Item No.:
Project No.:
EG20.34
S.I.S. No.:
Spec-Master®FN Series Coved Corner Three-Compartment Sinks
Drain location for rough-in
bowl bowl
width length Dimension A
in. mm
20˝ 508 16˝ 406 14˝ 356
20˝ 508 18˝ 457 14˝ 356
20˝ 508 20˝ 508 14˝ 356
24˝ 610 24˝ 610 16˝ 406
28˝ 711 20˝ 508 18˝ 457
Catalog Specification Sheet No.
in. mm
model # in. mm in. mm quantity in. mm in. mm in. mm lbs. kg
FN2048-3-14/3 20˝ 508 16˝ 406 0-27˝ 686 57˝ 1448 99 44.9
FN2048-3-18R or L-14/3 20˝ 508 16˝ 406 1 18˝ 457 27˝ 686 731⁄2˝ 1867 118 53.5
FN2048-3-18-14/3 20˝ 508 16˝ 406 2 18˝ 457 27˝ 686 90˝ 2286 137 61.7
FN2048-3-24R or L-14/3 20˝ 508 16˝ 406 1 24˝ 610 27˝ 686 791⁄2˝ 2019 124 56.2
FN2048-3-24-14/3 20˝ 508 16˝ 406 2 24˝ 610 27˝ 686 102˝ 2591 149 67.6
FN2048-3-30R or L-14/3 20˝ 508 16˝ 406 1 30˝ 762 27˝ 686 851⁄2˝ 2172 129 58.5
FN2048-3-30-14/3 20˝ 508 16˝ 406 2 30˝ 762 27˝ 686 114˝ 2896 159 72.1
FN2048-3-36R or L-14/3 20˝ 508 16˝ 406 1 36˝ 914 27˝ 686 911⁄2˝ 2324 134 60.8
FN2048-3-36-14/3 20˝ 508 16˝ 406 2 36˝ 914 27˝ 686 126˝ 3200 169 76.7
FN2054-3-14/3 * 20˝ 508 18˝ 457 0-27˝ 686 63˝ 1600 102 46.3
FN2054-3-18R or L-14/3 * 20˝ 508 18˝ 457 1 18˝ 457 27˝ 686 791⁄2˝ 2019 121 54.9
FN2054-3-18-14/3 * 20˝ 508 18˝ 457 2 18˝ 457 27˝ 686 96˝ 2438 140 63.5
FN2054-3-24R or L-14/3 * 20˝ 508 18˝ 457 1 24˝ 610 27˝ 686 851⁄2˝ 2172 127 57.6
FN2054-3-24-14/3 * 20˝ 508 18˝ 457 2 24˝ 610 27˝ 686 108˝ 2743 158 71.6
FN2054-3-30R or L-14/3 * 20˝ 508 18˝ 457 1 30˝ 762 27˝ 686 911⁄2˝ 2324 132 59.9
FN2054-3-30-14/3 * 20˝ 508 18˝ 457 2 30˝ 762 27˝ 686 120˝ 3048 162 73.5
FN2054-3-36R or L-14/3 * 20˝ 508 18˝ 457 1 36˝ 914 27˝ 686 971⁄2˝ 2477 137 62.1
FN2054-3-36-14/3 * 20˝ 508 18˝ 457 2 36˝ 914 27˝ 686 132˝ 3358 172 78.0
FN2060-3-14/3 * 20˝ 508 20˝ 508 0-27˝ 686 69˝ 1753 114 51.7
FN2060-3-18R or L-14/3 * 20˝ 508 20˝ 508 1 18˝ 610 27˝ 686 851⁄2˝ 2172 133 60.3
FN2060-3-18-14/3 * 20˝ 508 20˝ 508 2 18˝ 457 27˝ 686 102˝ 2591 152 68.9
FN2060-3-24R or L-14/3 * 20˝ 508 20˝ 508 1 24˝ 457 27˝ 686 911⁄2˝ 2324 139 63.1
FN2060-3-24-14/3 * 20˝ 508 20˝ 508 2 24˝ 610 27˝ 686 114˝ 2896 164 74.4
FN2060-3-30R or L-14/3 * 20˝ 508 20˝ 508 1 30˝ 762 27˝ 686 971⁄2˝ 2477 144 65.3
FN2060-3-30-14/3 * 20˝ 508 20˝ 508 2 30˝ 762 27˝ 686 126˝ 3200 174 78.9
FN2060-3-36R or L-14/3 * 20˝ 508 20˝ 508 1 36˝ 914 27˝ 686 103
FN2060-3-36-14/3 * 20˝ 508 20˝ 508 2 36˝ 914 27˝ 686 138˝ 3505 184 83.5
FN2472-3-14/3 * 24˝ 610 24˝ 610 0-31˝ 787 81˝ 2057 127 57.6
FN2472-3-18R or L-14/3 * 24˝ 610 24˝ 610 1 18˝ 457 31˝ 787 97
FN2472-3-18-14/3 * 24˝ 610 24˝ 610 2 18˝ 457 31˝ 787 114˝ 2896 165 74.8
FN2472-3-24R or L-14/3 * 24˝ 610 24˝ 610 1 24˝ 610 31˝ 787 103
FN Series Coved Corner Three-Compartment Sinks
®
Spec-Master
FN2472-3-24-14/3 * 24˝ 610 24˝ 610 2 24˝ 610 31˝ 787 126˝ 3200 177 80.3
FN2472-3-30R or L-14/3 * 24˝ 610 24˝ 610 1 30˝ 762 31˝ 787 1091⁄2˝ 2769 157 71.2
FN2472-3-30-14/3 * 24˝ 610 24˝ 610 2 30˝ 762 31˝ 787 138˝ 3505 187 84.8
FN2472-3-36R or L-14/3 * 24˝ 610 24˝ 610 1 36˝ 914 31˝ 787 1151⁄2˝ 2934 162 73.5
FN2472-3-36-14/3 * 24˝ 610 24˝ 610 2 36˝ 914 31˝ 787 150˝ 3810 197 89.4
FN2860-3-14/3 * 28˝ 711 20˝ 508 0-35˝ 889 69˝ 1753 130 59.0
FN2860-3-18R or L-14/3 * 28˝ 711 20˝ 508 1 18˝ 457 35˝ 889 851⁄2˝ 2172 149 67.6
FN2860-3-18-14/3 * 28˝ 711 20˝ 508 2 18˝ 457 35˝ 889 102˝ 2591 168 76.2
FN2860-3-24R or L-14/3 * 28˝ 711 20˝ 508 1 24˝ 610 35˝ 889 911⁄2˝ 2324 155 70.3
FN2860-3-24-14/3 * 28˝ 711 20˝ 508 2 24˝ 610 35˝ 889 114˝ 2896 180 81.6
FN2860-3-30R or L-14/3 * 28˝ 711 20˝ 508 1 30˝ 762 35˝ 889 971⁄2˝ 2477 160 72.6
FN2860-3-30-14/3 * 28˝ 711 20˝ 508 2 30˝ 762 35˝ 889 126˝ 3200 190 86.2
FN2860-3-36R or L-14/3 * 28˝ 711 20˝ 508 1 36˝ 914 35˝ 889 1031⁄2˝ 2629 165 74.8
FN2860-3-36-14/3 * 28˝ 711 20˝ 508 2 36˝ 914 35˝ 889 138˝ 3505 200 90.7
BOWL DIMENSIONS DRAINBOARD
width length length width length weight
* Features two sets of faucet holes.
OVERALL DIMENSIONS
1
⁄2˝ 2629 149 67.6
1
⁄2˝ 2477 146 66.2
1
⁄2˝ 2629 152 68.9
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
©2010 by Eagle Group
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
Rev. 04/10
Loading...