Eagle FN2032-2-18-14-3, FN2032-2 Installation Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Spec-Master®Two-Compartment Sinks, model
_____________. Unit constructed of 14/304, 18-8 stainless

5

steel throughout. Sink bowls coved with a full

⁄8˝ radius, and

shall have a 14˝ water level. Drainboards, when required, shall

1

be “V” creased for positive drainage. 9

⁄2˝ high backsplash with
1˝ upturn and tile edge. Legs to be 15⁄8˝ O.D., stainless steel,
with stainless steel gussets, stainless steel crossbracing and
adjustable stainless steel bullet feet.

2-compartment sink

(faucet not included)

Options / Accessories

Lever drain
Lever drain with overflow
Twist handle drains
Overflow hole

Faucets
Polyboard sink covers
Stainless steel sink covers
Skirted front panel

Sink kits

Spec-Master®FN Series Coved
Corner Two-Compartment Sinks

MODELS:

FN2032-2-*
FN2036-2-*
FN2040-2-*

* See table on back for complete model numbers.

Top:

• Drainboards, backsplash and rolled rims are 14 gauge type
304 stainless steel.

• Drainboards, when provided, are integrally welded.

• All rolled edges are highlighted for enhanced appearance.

1

⁄2˝ high backsplash with 1˝ upturn and tile edge.

• 9

1

⁄8˝ (29mm) faucet holes punched on 8˝ (203mm) centers.

• 1

Base:

• Legs: 15⁄8˝ (41mm)-diameter stainless steel tubing with
stainless steel gussets and fully adjustable stainless steel
bullet feet.

• Crossbracing: Adjustable, 1
steel; running left-to-right and front-to-back.

• Leg locations fall directly under sink bowls, providing
increased stability and maximum weight support.

• Leg gussets welded to a die-cut heavy-gauge stainless steel
reinforcing corner plate.

• Legs are crossbraced on all sides for increased stability.

FN2448-2-*
FN2840-2-*

1

⁄4˝ (32mm)-diameter stainless

EG20.33

Spec-Master

®

FN Series Coved Corner Two-Compartment Sinks

Assembly:

• Entire assembly is fuse-welded and planished, providing a
one-piece seamless sink unit.

• Welded areas are high-speed belt blended to match
adjacent surfaces with continuity of satin finish.

• All outside corners of assembly are bullnosed to provide
safe, clean edges.

• Water supply is

1

⁄2˝ (13mm) IPS for hot and cold lines.

EAGLE GROUP

Sink Bowls:

• 14 gauge type 304 stainless steel.

• 14˝ (356mm) water level, 17˝ (432mm) flood level.

5

• Sink compartments are coved on a full

⁄8˝ (41mm) radius
and constructed using state-of-the-art seamless welding
techniques.

1

• Basket-type waste drain fits sink bowls’ 3

⁄2˝ (89mm)

opening and features 11⁄2˝ (38mm) outlet.

Certifications / Approvals

100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: [phone] • Fax: [phone] • e-mail: [e-mail]

EG20.33 Rev. 04/10

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group

Item No.:

Project No.:

EG20.33

S.I.S. No.:

Spec-Master®FN Series Coved Corner Two-Compartment Sinks

Drain location for rough-in

bowl bowl
width length Dimension A

in. mm

20˝ 508 16˝ 406 14˝ 356
20˝ 508 18˝ 457 14˝ 356
20˝ 508 20˝ 508 14˝ 356
24˝ 610 24˝ 610 16˝ 406
28˝ 711 20˝ 508 18˝ 457

Catalog Specification Sheet No.

in. mm

BOWL DIMENSIONS DRAINBOARD

model # in. mm in. mm quantity in. mm in. mm in. mm lbs. kg

FN2032-2-14/3 20˝ 508 16˝ 406 0-27˝ 686 39˝ 991 77 34.9
FN2032-2-18R or L-14/3 20˝ 508 16˝ 406 1 18˝ 457 27˝ 686 55
FN2032-2-18-14/3 20˝ 508 16˝ 406 2 18˝ 457 27˝ 686 72˝ 1829 115 52.2
FN2032-2-24R or L-14/3 20˝ 508 16˝ 406 1 24˝ 610 27˝ 686 61
FN2032-2-24-14/3 20˝ 508 16˝ 406 2 24˝ 610 27˝ 686 84˝ 2134 127 57.6
FN2032-2-30R or L-14/3 20˝ 508 16˝ 406 1 30˝ 762 27˝ 686 67
FN2032-2-30-14/3 20˝ 508 16˝ 406 2 30˝ 762 27˝ 686 96˝ 2438 137 62.1
FN2032-2-36R or L-14/3 20˝ 508 16˝ 406 1 36˝ 914 27˝ 686 73
FN2032-2-36-14/3 20˝ 508 16˝ 406 2 36˝ 914 27˝ 686 108˝ 2743 147 66.7
FN2036-2-14/3 20˝ 508 18˝ 457 0-27˝ 686 43˝ 1092 82 37.2
FN2036-2-18R or L-14/3 20˝ 508 18˝ 457 1 18˝ 457 27˝ 686 59
FN2036-2-18-14/3 20˝ 508 18˝ 457 2 18˝ 457 27˝ 686 76˝ 1930 120 54.4
FN2036-2-24R or L-14/3 20˝ 508 18˝ 457 1 24˝ 610 27˝ 686 65
FN2036-2-24-14/3 20˝ 508 18˝ 457 2 24˝ 610 27˝ 686 88˝ 2235 132 59.9
FN2036-2-30R or L-14/3 20˝ 508 18˝ 457 1 30˝ 762 27˝ 686 71
FN2036-2-30-14/3 20˝ 508 18˝ 457 2 30˝ 762 27˝ 686 100˝ 2540 142 64.4
FN2036-2-36R or L-14/3 20˝ 508 18˝ 457 1 36˝ 914 27˝ 686 77
FN2036-2-36-14/3 20˝ 508 18˝ 457 2 36˝ 914 27˝ 686 112˝ 2845 152 68.9
FN2040-2-14/3 20˝ 508 20˝ 508 0-27˝ 686 47˝ 1194 86 39.0
FN2040-2-18R or L-14/3 20˝ 508 20˝ 508 1 18˝ 610 27˝ 686 63
FN2040-2-18-14/3 20˝ 508 20˝ 508 2 18˝ 457 27˝ 686 80˝ 2032 124 56.2
FN2040-2-24R or L-14/3 20˝ 508 20˝ 508 1 24˝ 457 27˝ 686 69
FN2040-2-24-14/3 20˝ 508 20˝ 508 2 24˝ 610 27˝ 686 92˝ 2337 136 61.7
FN2040-2-30R or L-14/3 20˝ 508 20˝ 508 1 30˝ 762 27˝ 686 75
FN2040-2-30-14/3 20˝ 508 20˝ 508 2 30˝ 762 27˝ 686 104˝ 2642 146 66.2
FN2040-2-36R or L-14/3 20˝ 508 20˝ 508 1 36˝ 914 27˝ 686 81
FN2040-2-36-14/3 20˝ 508 20˝ 508 2 36˝ 914 27˝ 686 116˝ 2946 156 70.8
FN2448-2-14/3 24˝ 610 24˝ 610 0-31˝ 787 55˝ 1397 91 41.3
FN2448-2-18R or L-14/3 24˝ 610 24˝ 610 1 18˝ 457 31˝ 787 71

FN Series Coved Corner Two-Compartment Sinks

®

FN2448-2-18-14/3 24˝ 610 24˝ 610 2 18˝ 457 31˝ 787 88˝ 2235 129 58.5
FN2448-2-24R or L-14/3 24˝ 610 24˝ 610 1 24˝ 610 31˝ 787 77
FN2448-2-24-14/3 24˝ 610 24˝ 610 2 24˝ 610 31˝ 787 100˝ 2540 141 64.0
FN2448-2-30R or L-14/3 24˝ 610 24˝ 610 1 30˝ 762 31˝ 787 83
FN2448-2-30-14/3 24˝ 610 24˝ 610 2 30˝ 762 31˝ 787 112˝ 2845 151 68.5
FN2448-2-36R or L-14/3 24˝ 610 24˝ 610 1 36˝ 914 31˝ 787 89
FN2448-2-36-14/3 24˝ 610 24˝ 610 2 36˝ 914 31˝ 787 124˝ 3150 161 73.0
FN2840-2-14/3 28˝ 711 20˝ 508 0-35˝ 889 47˝ 1194 96 43.6
FN2840-2-18R or L-14/3 28˝ 711 20˝ 508 1 18˝ 457 35˝ 889 63

Spec-Master

FN2840-2-18-14/3 28˝ 711 20˝ 508 2 18˝ 457 35˝ 889 80˝ 2032 134 60.8
FN2840-2-24R or L-14/3 28˝ 711 20˝ 508 1 24˝ 610 35˝ 889 69
FN2840-2-24-14/3 28˝ 711 20˝ 508 2 24˝ 610 35˝ 889 92˝ 2337 146 66.2
FN2840-2-30R or L-14/3 28˝ 711 20˝ 508 1 30˝ 762 35˝ 889 75
FN2840-2-30-14/3 28˝ 711 20˝ 508 2 30˝ 762 35˝ 889 104˝ 2642 156 70.8
FN2840-2-36R or L-14/3 28˝ 711 20˝ 508 1 36˝ 914 35˝ 889 81
FN2840-2-36-14/3 28˝ 711 20˝ 508 2 36˝ 914 35˝ 889 116˝ 2946 166 75.3

width length length width length weight

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

OVERALL DIMENSIONS

1

⁄2˝ 1410 96 43.6

1

⁄2˝ 1562 102 46.3

1

⁄2˝ 1715 107 48.5

1

⁄2˝ 1867 112 50.8

1

⁄2˝ 1511 101 45.8

1

⁄2˝ 1664 107 48.5

1

⁄2˝ 1816 112 50.8

1

⁄2˝ 1969 117 53.1

1

⁄2˝ 1613 105 47.6

1

⁄2˝ 1763 111 50.3

1

⁄2˝ 1918 116 52.6

1

⁄2˝ 2070 121 54.9

1

⁄2˝ 1816 110 49.9

1

⁄2˝ 1969 116 52.6

1

⁄2˝ 2121 121 54.9

1

⁄2˝ 2273 126 57.2

1

⁄2˝ 1613 115 52.2

1

⁄2˝ 1763 121 54.9

1

⁄2˝ 1918 126 56.7

1

⁄2˝ 2070 131 59.4

Printed in U.S.A.

©2010 by Eagle Group

Rev. 04/10