Eagle FN2016-1-24-14-3 User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Spec-Master

®

One-Compartment Sinks, model

_____________. Unit constructed of 14/304, 18-8 stainless

5

steel throughout. Sink bowls coved with a full

⁄8˝ radius, and

shall have a 14˝ water level. Drainboards, when required, shall

1

be “V” creased for positive drainage. 9

⁄2˝ high backsplash with
1˝ upturn and tile edge. Legs to be 15⁄8˝ O.D., stainless steel,
with stainless steel gussets, stainless steel crossbracing and
adjustable stainless steel bullet feet.

one-compartment FN sink

Options / Accessories

Lever drain
Lever drain with overflow
Twist handle drains
Overflow hole

Sink kits
Faucets
Polyboard sink covers
Stainless steel sink covers

Spec-Master®FN Series Coved
Corner One-Compartment Sinks

MODELS:

FN2016-1-*
FN2018-1-*
FN2020-1-*

* See chart on back for complete model numbers.

Top:

• Drainboards, backsplash and rolled rims are 14 gauge
type 304 stainless steel.

• Drainboards, when provided, are integrally welded.

• All rolled edges are highlighted for enhanced appearance.

1

⁄2˝ high backsplash with 1˝ upturn and tile edge.

• 9

1

⁄8˝ (29mm) faucet holes punched on 8˝ (203mm) centers.

• 1

Base:

• Legs: 15⁄8˝ (41mm)-diameter stainless steel tubing with
stainless steel gussets and fully adjustable stainless steel
bullet feet.

• Crossbracing: Adjustable, 1
steel; running left-to-right and front-to-back.

• Leg locations fall directly under sink bowl, providing
increased stability and maximum weight support.

• Leg gussets welded to a die-cut heavy-gauge stainless steel
reinforcing corner plate.

• Legs are crossbraced on all sides for increased stability.

FN2424-1-*
FN2820-1-*

1

⁄4˝ (32mm)-diameter stainless

EG20.32

Spec-Master

®

FN Series Coved Corner One-Compartment Sinks

Assembly:

• Entire assembly is fuse-welded and planished, providing a
one-piece seamless sink unit.

• Welded areas are high-speed belt blended to match
adjacent surfaces with continuity of satin finish.

• All outside corners of assembly are bullnosed to provide
safe, clean edges.

1

• Water supply is

⁄2˝ (13mm) IPS for hot and cold lines.

EAGLE GROUP

Sink Bowl:

• 14 gauge type 304 stainless steel.

• 14˝ (356mm) water level, 17˝ (432mm) flood level.

5

• Sink compartment coved on a full

⁄8˝ (41mm) radius and
constructed using state-of-the-art seamless welding
techniques.

1

• Basket-type waste drain fits sink bowl’s 3

⁄2˝ (89mm)

opening and features 11⁄2˝ (38mm) outlet.

Certifications / Approvals

100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]
MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: [phone] • Fax: [phone] • e-mail: [e-mail]

EG20.32 Rev. 04/10

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group

Item No.:

Project No.:

EG20.32

S.I.S. No.:

Spec-Master®FN Series Coved Corner One-Compartment Sinks

Drain location for rough-in

bowl bowl
width length Dimension A

in. mm

20˝ 508 16˝ 406 14˝ 356
20˝ 508 18˝ 457 14˝ 356
20˝ 508 20˝ 508 14˝ 356
24˝ 610 24˝ 610 16˝ 406
28˝ 711 20˝ 508 18˝ 457

Catalog Specification Sheet No.

in. mm

model # in. mm in. mm quantity in. mm in. mm in. mm lbs. kg

FN2016-1-14/3 20˝ 508 16˝ 406 0-27˝ 686 21˝ 533 55 24.9
FN2016-1-18R or L-14/3 20˝ 508 16˝ 406 1 18˝ 457 27˝ 686 37
FN2016-1-18-14/3 20˝ 508 16˝ 406 2 18˝ 457 27˝ 686 54˝ 1372 93 37.6
FN2016-1-24R or L-14/3 20˝ 508 16˝ 406 1 24˝ 610 27˝ 686 43
FN2016-1-24-14/3 20˝ 508 16˝ 406 2 24˝ 610 27˝ 686 66˝ 1676 105 42.1
FN2016-1-30R or L-14/3 20˝ 508 16˝ 406 1 30˝ 762 27˝ 686 49
FN2016-1-30-14/3 20˝ 508 16˝ 406 2 30˝ 762 27˝ 686 78˝ 1981 115 52.2
FN2016-1-36R or L-14/3 20˝ 508 16˝ 406 1 36˝ 914 27˝ 686 55
FN2016-1-36-14/3 20˝ 508 16˝ 406 2 36˝ 914 27˝ 686 90˝ 2286 125 56.7
FN2018-1-14/3 20˝ 508 18˝ 457 0-27˝ 686 23˝ 584 58 26.3
FN2018-1-18R or L-14/3 20˝ 508 18˝ 457 1 18˝ 457 27˝ 686 39
FN2018-1-18-14/3 20˝ 508 18˝ 457 2 18˝ 457 27˝ 686 56˝ 1422 96 43.5
FN2018-1-24R or L-14/3 20˝ 508 18˝ 457 1 24˝ 610 27˝ 686 45
FN2018-1-24-14/3 20˝ 508 18˝ 457 2 24˝ 610 27˝ 686 68˝ 1727 106 48.1
FN2018-1-30R or L-14/3 20˝ 508 18˝ 457 1 30˝ 762 27˝ 686 51
FN2018-1-30-14/3 20˝ 508 18˝ 457 2 30˝ 762 27˝ 686 90˝ 2032 118 53.5
FN2018-1-36R or L-14/3 20˝ 508 18˝ 457 1 36˝ 914 27˝ 686 57
FN2018-1-36-14/3 20˝ 508 18˝ 457 2 36˝ 914 27˝ 686 92˝ 2337 128 58.1
FN2020-1-14/3 20˝ 508 20˝ 508 0-27˝ 686 25˝ 635 60 27.2
FN2020-1-18R or L-14/3 20˝ 508 20˝ 508 1 18˝ 610 27˝ 686 41
FN2020-1-18-14/3 20˝ 508 20˝ 508 2 18˝ 457 27˝ 686 58˝ 1473 98 44.5
FN2020-1-24R or L-14/3 20˝ 508 20˝ 508 1 24˝ 457 27˝ 686 47
FN2020-1-24-14/3 20˝ 508 20˝ 508 2 24˝ 610 27˝ 686 70˝ 1778 110 48.5
FN2020-1-30R or L-14/3 20˝ 508 20˝ 508 1 30˝ 762 27˝ 686 53
FN2020-1-30-14/3 20˝ 508 20˝ 508 2 30˝ 762 27˝ 686 82˝ 2083 120 54.4
FN2020-1-36R or L-14/3 20˝ 508 20˝ 508 1 36˝ 914 27˝ 686 59
FN2020-1-36-14/3 20˝ 508 20˝ 508 2 36˝ 914 27˝ 686 94˝ 2388 130 59.0
FN2424-1-14/3 24˝ 610 24˝ 610 0-31˝ 787 29˝ 737 69 31.2
FN2424-1-18R or L-14/3 24˝ 610 24˝ 610 1 18˝ 457 31˝ 787 45

FN Series Coved Corner One-Compartment Sinks

®

FN2424-1-18-14/3 24˝ 610 24˝ 610 2 18˝ 457 31˝ 787 62˝ 1575 107 48.5
FN2424-1-24R or L-14/3 24˝ 610 24˝ 610 1 24˝ 610 31˝ 787 51
FN2424-1-24-14/3 24˝ 610 24˝ 610 2 24˝ 610 31˝ 787 74˝ 1880 119 49.0
FN2424-1-30R or L-14/3 24˝ 610 24˝ 610 1 30˝ 762 31˝ 787 57
FN2424-1-30-14/3 24˝ 610 24˝ 610 2 30˝ 762 31˝ 787 86˝ 2184 129 58.5
FN2424-1-36R or L-14/3 24˝ 610 24˝ 610 1 36˝ 914 31˝ 787 63
FN2424-1-36-14/3 24˝ 610 24˝ 610 2 36˝ 914 31˝ 787 98˝ 2489 139 63.1
FN2820-1-14/3 28˝ 711 20˝ 508 0-35˝ 889 25˝ 635 79 35.8
FN2820-1-18R or L-14/3 28˝ 711 20˝ 508 1 18˝ 457 35˝ 889 41

Spec-Master

FN2820-1-18-14/3 28˝ 711 20˝ 508 2 18˝ 457 35˝ 889 58˝ 1473 117 53.1
FN2820-1-24R or L-14/3 28˝ 711 20˝ 508 1 24˝ 610 35˝ 889 47
FN2820-1-24-14/3 28˝ 711 20˝ 508 2 24˝ 610 35˝ 889 70˝ 1778 129 55.3
FN2820-1-30R or L-14/3 28˝ 711 20˝ 508 1 30˝ 762 35˝ 889 53
FN2820-1-30-14/3 28˝ 711 20˝ 508 2 30˝ 762 35˝ 889 82˝ 2083 139 63.1
FN2820-1-36R or L-14/3 28˝ 711 20˝ 508 1 36˝ 914 35˝ 889 59
FN2820-1-36-14/3 28˝ 711 20˝ 508 2 36˝ 914 35˝ 889 94˝ 2388 149 67.6

BOWL DIMENSIONS DRAINBOARD

OVERALL DIMENSIONS

width length length width length weight

1

⁄2˝ 953 74 30.8

1

⁄2˝ 1105 80 33.1

1

⁄2˝ 1257 85 38.6

1

⁄2˝ 1410 90 40.8

1

⁄2˝ 1003 76 34.4

1

⁄2˝ 1156 81 36.7

1

⁄2˝ 1308 88 39.9

1

⁄2˝ 1464 93 42.2

1

⁄2˝ 1054 79 35.8

1

⁄2˝ 1207 85 37.2

1

⁄2˝ 1359 90 40.8

1

⁄2˝ 1511 95 43.1

1

⁄2˝ 1156 88 39.9

1

⁄2˝ 1308 88 37.6

1

⁄2˝ 1461 99 44.9

1

⁄2˝ 1613 104 47.2

1

⁄2˝ 1054 98 44.5

1

⁄2˝ 1207 104 43.1

1

⁄2˝ 1359 109 49.4

1

⁄2˝ 1511 114 51.7

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]

©2010 by Eagle Group

MHC/Retail Display Divisions: Phone [phone]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

Printed in U.S.A.

Rev. 04/10