Eagle EP2460 User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
11⁄2˝ welded tube frame is shipped knocked-down and bolted
together with cross members. Electropolished or brushed 300
series stainless steel. Available with non-removable and
removable hangers. Nylon dissipative feet standard. Hanger
slots are standard on 3˝ centers, with other spacing available.
single gowning rack
dual gowning rack
cantilever gowning rack
Options / Accessories
Hangers
Foot plates
Other hanger slot spacing
Freestanding Gowning Racks
with Hanger Rail
MODELS:
S2448*
S2460*
* See charts on back for complete model numbers.
Design and Construction Features
• 14 gauge hanger rails with hanger slots spaced on standard
3˝ (76mm) centers. Slots designed to retain gowns in a
fixed position by allowing the hangers (not included) to
swing front-to-back but not left-to-right, while the shape
facilitates a smoother laminar flow than many square
hanger rails.
• Vertical supports are constructed of heavy gauge type 304
stainless steel 1
ground and polished to its original finish. Each unit is
supplied with four adjustable feet that are constructed to
dissipate a static charge.
• Horizontal supports are bolted to vertical uprights using
stainless steel bolts. Constructed of 1˝ (25mm) O.D. type
304 stainless steel tubing with heavy gauge stainless steel
backing plate. The bolts are covered with a stainless steel
cap to eliminate any crevasses in which dust might settle.
• Hanger rail is constructed of heavy gauge type 304 stainless
steel with hanger slots located every 3˝ (76mm) along the
length of the rail. Other spacing available (see back page).
• Standard 2˝ (51mm)-diameter, nylon dissipative feet with
1
⁄2˝ (13mm) adjustability. Optional foot plates available to
affix gowning rack to the floor.
• Available with non-removable hanger construction—
A domed cap over the hanger rail secures hangers and
prevents removal.
• Finishes available are 304 series stainless steel with
#4 satin or electropolished finish.
• Single, dual, and cantilever styles available.
• Shipped knocked-down, saving in freight costs
and damages.
S2472*
S2484*
1
⁄2˝ (38mm) square tubing, fully welded,
EP2448*
EP2460*
EP2472*
EP2484*
EG04.01A
Freestanding Gowning Racks with Hanger Rail
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2008 by the Eagle Group
EG04.01A Rev. 10/08
Item No.:
Project No.:
EG04.01A
S.I.S. No.:
Freestanding Gowning Racks with Hanger Rail
Single Gowning Racks
stainless steel electropolished width length weight number of
model # model # in. mm in. mm lbs. kg hanger slots
S2448-S* EP2448-S* 24˝ 610 48˝ 1219 40 18.1 15
S2460-S* EP2460-S* 24˝ 610 60˝ 1524 45 20.4 19
S2472-S* EP2472-S* 24˝ 610 72˝ 1829 50 22.7 23
S2484-S* EP2484-S* 24˝ 610 84˝ 2134 55 24.9 27
Number of Hanger Slots on Optional Spacing for Single Gowning Racks
unit length on 11⁄2˝ (38mm) on 2˝ (51mm) on 21⁄2˝ (64mm)
Catalog Specification Sheet No.
in. mm centers centers centers
48˝ 1219 29 22 17
60˝ 1524 37 28 22
72˝ 1829 45 34 27
84˝ 2134 53 40 32
Double Gowning Racks
stainless steel electropolished width length weight number of
model # model # in. mm in. mm lbs. kg hanger slots
S2448-D* EP2448-D* 24˝ 610 48˝ 1219 59 26.7 32
S2460-D* EP2460-D* 24˝ 610 60˝ 1524 68 30.8 40
S2472-D* EP2472-D* 24˝ 610 72˝ 1829 77 34.9 48
S2484-D* EP2484-D* 24˝ 610 84˝ 2134 86 39.0 56
Number of Hanger Slots on Optional Spacing for Double Gowning Racks
unit length on 11⁄2˝ (38mm) on 2˝ (51mm) on 21⁄2˝ (64mm)
in. mm centers centers centers
48˝ 1219 60 46 36
60˝ 1524 76 58 46
72˝ 1829 92 70 56
84˝ 2134 108 82 66
Cantilever Gowning Racks
stainless steel electropolished width length weight number of
model # model # in. mm in. mm lbs. kg hanger slots
Freestanding Gowning Racks with Hanger Rail
S2448-C* EP2448-C* 24˝ 610 48˝ 1219 45 20.4 16
S2460-C* EP2460-C* 24˝ 610 60˝ 1524 50 22.7 20
S2472-C* EP2472-C* 24˝ 610 72˝ 1829 55 24.9 24
S2484-C* EP2484-C* 24˝ 610 84˝ 2134 60 27.2 28
Number of Hanger Slots on Optional Spacing for Cantilever Gowning Racks
unit length on 11⁄2˝ (38mm) on 2˝ (51mm) on 21⁄2˝ (64mm)
in. mm centers centers centers
48˝ 1219 30 23 18
60˝ 1524 38 29 23
72˝ 1829 46 35 28
84˝ 2134 54 41 33
* For Non-Removable Hangers add suffix “GRN” to the model number. Example: S2448-SGRN.
For Removable Hangers add suffix “GRR” to the model number. Example: EP2448-DGRR
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Printed in U.S.A.
©2008 by Eagle Group
Rev. 10/08
Loading...