Eagle E18-C User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Wire and Solid Shelving Components and Accessories —Dividers, Ledges, Panels

MODELS:

SD*-C SD*-S SSD*-C SSD*-S L*-1C

* See charts for complete model numbers.

divider for wire shelving

L*-1S L*-4C L*-4S SL*-1C SL*-1S

SL*-4C SL*-4S E18*-C E18*-S E24*-C

E24*-S PZD-Z RETAINING CLAMP A204318

Dividers…

8˝ (203mm) height.

divider for solid shelving

1˝ (25mm)-high ledge

4˝ (102mm)-high ledge

…FOR WIRE SHELVING

chrome stainless shelf width weight

model # model # in. mm lbs. kg

SD14-C SD14-S 14˝ 356 1.0 0.5 SD18-C SD18-S 18˝ 457 1.3 0.6 SD21-C SD21-S 21˝ 533 1.5 0.7 SD24-C SD24-S 24˝ 610 1.8 0.8 SD30-C SD30-S 30˝ 762 2.2 1.0 SD36-C SD36-S 36˝ 914 2.7 1.2

…FOR SOLID SHELVING

chrome stainless shelf width weight

model # model # in. mm lbs. kg

SSD14-C SSD14-S 14˝ 356 1.0 0.5 SSD18-C SSD18-S 18˝ 457 1.3 0.6 SSD21-C SSD21-S 21˝ 533 1.5 0.7 SSD24-C SSD24-S 24˝ 610 1.8 0.8 SSD30-C SSD30-S 30˝ 762 2.2 1.0 SSD36-C SSD36-S 36˝ 914 2.7 1.2

Ledges…

Prevents contents from falling off unit. Available in chrome or stainless steel.

…FOR WIRE SHELVING …FOR SOLID SHELVING

shelf width chrome stainless weight chrome stainless weight chrome stainless weight chrome stainless weight in. mm model # model # lbs. kg. model # model # lbs. kg. model # model # lbs. kg. model # model # lbs. kg.

14˝ 356 L14-1C L14-1S 0.2 0.1 L14-4C L14-4S 0.8 0.4 SL14-1C SL14-1S 0.2 0.1 SL14-4C SL14-4S 0.8 0.4 18˝ 457 L18-1C L18-1S 0.3 0.1 L18-4C L18-4S 0.9 0.4 SL18-1C SL18-1S 0.3 0.1 SL18-4C SL18-4S 0.9 0.4 21˝ 533 L21-1C L21-1S 0.4 0.2 L21-4C L21-4S 1.0 0.5 SL21-1C SL21-1S 0.4 0.2 SL21-4C SL21-4S 1.0 0.5 24˝ 610 L24-1C L24-1S 0.5 0.2 L24-4C L24-4S 1.2 0.5 SL24-1C SL24-1S 0.5 0.2 SL24-4C SL24-4S 1.2 0.5 30˝ 762 L30-1C L30-1S 0.7 0.3 L30-4C L30-4S 1.4 0.6 SL30-1C SL30-1S 0.7 0.3 SL30-4C SL30-4S 1.4 0.6 36˝ 914 L36-1C L36-1S 0.9 0.4 L36-4C L36-4S 1.6 0.7 SL36-1C SL36-1S 0.9 0.4 SL36-4C SL36-4S 1.6 0.7 42˝ 1067 L42-1C L42-1S 1.1 0.5 L42-4C L42-4S 1.8 0.8 SL42-1C SL42-1S 1.1 0.5 SL42-4C SL42-4S 1.8 0.8

48˝ 1219 L48-1C L48-1S 1.3 0.6 L48-4C L48-4S 2.0 0.9 SL48-1C SL48-1S 1.3 0.6 SL48-4C SL48-4S 2.0 0.9 54˝ 1372 L54-1C L54-1S 1.5 0.7 L54-4C L54-4S 2.2 1.0 SL54-1C SL54-1S 1.5 0.7 SL54-4C SL54-4S 2.2 1.0 60˝ 1524 L60-1C L60-1S 1.7 0.8 L60-4C L60-4S 2.4 1.1 SL60-1C SL60-1S 1.7 0.8 SL60-4C SL60-4S 2.4 1.1 72˝ 1829 L72-1C L72-1S 2.1 1.0 L72-4C L72-4S 2.6 1.2 SL72-1C SL72-1S 2.1 1.0 SL72-4C SL72-4S 2.6 1.2

1˝ (25mm) HEIGHT 4˝ (102mm) HEIGHT 1˝ (25mm) HEIGHT 4˝ (102mm) HEIGHT

EG01.03A

Wire and Solid Shelving Components and Accessories—Dividers, Ledges, Panels

EAGLE GROUP 100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com

EG01.03A Rev. 12/10

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

EG01.03A

Item No.:

Project No.:

S.I.S. No.:

Catalog Specification Sheet No.

pizza box

dividers

enclosure panel

Pizza Box Divider

26˝ (660mm) height. Attaches onto 14˝ (356mm)-wide shelving. Zinc finish. Sold individually.

model # in. mm lb. kg

PZD-Z 28˝ 711 5 2.3

width weight

Enclosure Panels

Helps secure shelf contents, enclosing the backs and sides of unit. Available in chrome or stainless steel. Please consult tables below to determine proper quantity and model numbers when enclosing backs or sides of shelving systems. Note: For use with wire shelves only. Not accepted by corner castings of solid shelves.

chrome stainless shelf width post height panel height weight

model # model # in. mm in. mm in. mm lbs. kg

E1854-C E1854-S 18˝ 457 54˝ 1372 14˝ 356 6 2.7 E1863-C E1863-S 18˝ 457 63˝ 1600 14˝ 356 7 3.2 E1874-C E1874-S 18˝ 457 74˝ 1880 14˝ 356 8 3.6 E2454-C E2454-S 24˝ 610 54˝ 1372 20˝ 508 9 4.1 E2463-C E2463-S 24˝ 610 63˝ 1600 20˝ 508 10 4.5 E2474-C E2474-S 24˝ 610 74˝ 1880 20˝ 508 11 5.0

Consult these tables for panel configurations:

– BACK PANELS

shelf required POST POST POST

length (all HEIGHT HEIGHT HEIGHT

in. mm heights) model # model # model #

30˝ 762 1 E2454 E2463 E2474 36˝ 914 2 E1854 E1863 E1874

42˝ 1067

48˝ 1219 2 E2454 E2463 E2474

54˝ 1372

60˝ 1524

72˝ 1829 3 E2454 E2463 E2474

– END PANELS

shelf required POST POST POST width (all HEIGHT HEIGHT HEIGHT

in. mm heights) model # model # model #

18˝ 457 1 E1854 E1863 E1874 21˝ 533 1 E1854 E1863 E1874 24˝ 610 1 E2454 E2463 E2474 30˝ 762 1 E2454 E2463 E2474 36˝ 914 2 E1854 E1863 E1874

quantity 54˝ (1372mm) 63˝ (1600mm) 74˝ (1880mm)

1 E1854 E1863 E1874 1 E2454 E2463 E2474

2 E1854 E1863 E1874 1 E2454 E2463 E2474

2 E2454 E2463 E2474 1 E1854 E1863 E1874

quantity 54˝ (1372mm) 63˝ (1600mm) 74˝ (1880mm)

Retaining Clamp

Attaches enclosure panels to wire shelving.

retaining clamp

EAGLE GROUP 100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Wire and Solid Shelving Components and Accessories—Dividers, Ledges, Panels

Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

model #: RETAINING CLAMP

clip

Clip for Solid Shelf (only)

Attaches enclosure panels to solid shelving.

model #: A204318

Printed in U.S.A.

Rev. 12/10