Eagle DDFT-12 User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Double-Deep Floor-Trak®High Density Storage System for Wire Shelving, with non-corrosive aluminum tracks with end stops. Skate Kits are aircraft quality aluminum with stainless steel inserts and hardened steel bearings, one kit required for each

mobile unit. System is ADA compliant. Note: Floor-Trak

Kits, Skate Kits, Posts, and Wire Shelving all need to be ordered separately.

track

skate

double-deep unit shown assembled

end stop

with two wire starter units*

*Wire shelving sold separately.

Double-Deep Floor-Trak®Systems —for use with Wire Shelving

MODELS:

DDFT-* DDSK-*

* See charts for complete model numbers.

• Floor-Trak®system designed for use with wire shelving units.

• Consolidates space.

• Low profile, non-corrosive track constructed of stainless steel and anodized aluminum.

• The system is ADA-compliant.

• Simple and easy to install.

• Can be built double-deep and not impede rollability.

• Easy to add on additional units.

• Open construction allows for the use of cart covers when required.

• Industrial-type, hardened steel bearings allow loaded units to glide effortlessly over the track.

Wire Shelving (sold separately)

• Patented QuadTruss 25% stronger.

• Open-wire construction promotes higher visibility and reduces dust build-up.

• Posts are numbered in 1˝ (25mm) increments for fast and level assembly.

• Many finishes available—from zinc to stainless steel.

TEP74-* TEP86-*

design makes shelves up to

EG01.39B

Double-Deep Floor-Trak

Systems—for use with Wire Shelving

Options / Accessories

Bumper brackets Shim Kit (#912991) Foot Brake Kit (#MFBK-S)

EAGLE GROUP

Bumper Brackets available:

• Helps prevent shelf unit from tipping over due to uneven floor or due to unevenly distributed weight of shelf contents.

• Once installed, brackets hover over track of Floor-Trak contact with track unless shelf unit begins to tip over.

• Easily attaches to skate kit of any Floor-Trak of adjoining shelf unit.

• All-welded stainless steel construction, with heavy duty

system, but do not make

system, along with post

⁄4˝ (6mm)-diameter rod.

Certifications / Approvals

…sold as kits

# of

brackets

for use with included model #

double-deep skate kits 6 DDSKATB-S

…sold individually (hardware included)

model # SKATB-S

100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com

EG01.39B Rev. 12/11

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Item No.:

Project No.:

EG01.39B

S.I.S. No.:

Double-Deep Floor-Trak®Systems—for use with Wire Shelving

Floor Track Kits

Each kit consists of three aluminum tracks with end stops. All hardware and assembly instructions included. Note: Not recommended to piece tracks together. Order length needed. Custom lengths available. Consult factory.

model # ft. mm lbs. kg

DDFT-6 6´ 1829 7 3.2

Catalog Specification Sheet No.

DDFT-7 7´ 2134 8 3.6 DDFT-8 8´ 2438 9 4.1 DDFT-9 9´ 2743 10 4.5 DDFT-10 10´ 3048 DDFT-11 11´ 3353 DDFT-12 12´ 3658 DDFT-13 13´ 3962 DDFT-14 14´4267 16 7.3 DDFT-15 15´4572 17 7.7 DDFT-16 16´4877 18 8.2 DDFT-17 17´5181 19 8.6 DDFT-18 18´5486 21 9.5

NOTE: Double deep units should not exceed shelving depths of 10´.

length weight

13 5.8 14 6.4 15 6.8 16 7.3

model # ft. mm lbs. kg

DDFT-19 19´5791 22 10.0 DDFT-20 20´6096 23 10.4 DDFT-21 21´6401 24 10.9 DDFT-22 22´6706 25 11.3 DDFT-23 23´7010 26 11.8 DDFT-24 24´7315 27 12.2 DDFT-25 25´7620 28 12.7 DDFT-26 26´7925 29 13.2 DDFT-27 27´8230 30 13.6 DDFT-28 28´8534 31 14.1 DDFT-29 29´8839 32 14.5 DDFT-30 30´9144 33 15.0

Skate Kits

Kit includes three aluminum skates and all nec es sary parts and hard ware. Skates are aircraft-quality aluminum with stainless steel inserts and hardened steel ball bearings. One kit is required for each mobile unit. Shelves and posts not included. Weight capacity of 1500 lbs. (680.4 kg) per mobile section—3000 lbs. (1361 kg) at middle skate.

Note: When assembling with shelf unit, add 1˝ (25mm) to width and 3˝ (76mm) to length of shelf unit.

Systems—for use with Wire Shelving

model # in. mm lbs. kg

DDSK-18 18˝ 457 10 4.5 DDSK-21 21˝ 533 11 5.0 DDSK-24 24˝ 610 12 5.4 DDSK-30 30˝ 762 14 6.4 DDSK-36 36˝ 914 16 7.3

width weight

track

end stop

length weight

bottom wing for

double deep units

Inside Posts for Double-Deep Units

Each double deep unit requires set of four ‘inside posts’ (listed below) along with four standard ‘stationary posts’ (not included).

SET OF FOUR 74˝ (1880mm) POSTS SET OF FOUR 86˝ (2184mm) POSTS

EAGLEbrite®chrome EAGLEgard®weight EAGLEbrite®chrome EAGLEgard®weight

Double-Deep Floor-Trak

model # model # model # lbs. kg model # model # model # lbs. kg

TEP74-Z TEP74-C TEP74-E 17 7.7 TEP86-Z TEP86-C TEP86-E 21 9.5

IMPORTANT – Maximum post height per skate size:

For 18˝-, 21˝-, and 24˝- wide skates: 74˝ or less post height; For 30˝- and 36˝-wide skates: 86˝ or less post height.

EAGLE GROUP 100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Foodservice Division: Phone 800-441-8440 MHC/Retail Display Divisions: Phone 800-637-5100

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

Printed in U.S.A.

Rev. 12/11