Eagle DCS--PUD-2TH User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Director’s Choice

Dish / Cup Dispenser Unit, model

______________. Top to be 16/304 stainless steel turned

down on all sides. 1

⁄2˝ square type 304 stainless steel all-welded tubular base. Quick release spring loaded docking device keeps adjoining units together. Heated unit to come with 5´-long cord(s) and plug(s). Fully mobile with 5˝ poly casters, two with brake. Standard laminate panel is holly berry red

(Wilsonart

#D307-60).

model #DCS-PUD-4T

(shown with optional tray slide)

Options / Accessories

Stainless steel end panels Stainless steel front panel Stainless steel tray slide*

* Available in solid ribbed, square tubular or round tubular. For front, rear, or ends.

** Available in maple, stainless steel, poly, or Richlite

Work shelf** Specify laminate ________ Dome covers (for heated units)

. For front, rear, or ends.

Director’s Choice

Dish/Cup Dispensers

MODELS:

DCS-PUD-2TH DCS-PUD-3TH DCS-PUD-4TH DCS-PUD-5TH DCS-PUDT-CSH

Design and Construction Features

• 30˝ (762mm)-wide top is constructed of 16 gauge type 304 stainless steel, with required holes to accommodate dish/cup dispensers.

• Welded 1

⁄2˝ (38mm) type 304 stainless steel square tubular

base construction.

• On heated units, temperature range is 80˚–100˚F minimum, 110˚–160˚F maximum.

• Dispensers included.

• Heated units include shielded dispensers, with 5´ (1524mm)-long cord(s) and plug(s).

• Optional dome covers available for heated units.

• Fully mobile - standard 5˝ (127mm) poly tread casters, two with brake (brake casters on server side).

• Quick-release spring-loaded docking device keeps adjoining units together without the use of tools.

• Standard holly berry red (Wilsonart mounted on 18 gauge galvanized subpanel on all four sides.

• End panels available in laminate or stainless steel.

• All units accommodate optional accessories, including tray slides, work shelves, and removable undershelves. See Catalog Sheet EG33.07.

DCS-PUD-2T DCS-PUD-3T DCS-PUD-4T DCS-PUD-5T DCS-PUDT-CS

D307-60) laminate

EG33.17

Director’s Choice

Dish/Cup Dispensers

EAGLE GROUP

Certifications / Approvals

100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Foodservice Division: Phone 800-441-8440

CUSTOM-BUILT

MHC/Retail Display Divisions: Phone 800-637-5100

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com

EG33.17 Rev. 07/09

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

EG33.17

Director’s Choice®Dish/Cup Dispensers

Item No.:

Project No.:

S.I.S. No.:

Catalog Specification Sheet No.

#DCS-PUD-2T and

#DCS-PUD-2TH

Heated Units

Includes shielded dispensers.

model # description electrical data MAXIMUM diameter lbs. kg

DCS-PUD-2TH DCS-PUD-3TH DCS-PUD-4TH

Dish/Cup Dispensers

DCS-PUD-5TH DCS-PUDT-CSH

Non-Heated Units

Includes unshielded dispensers.

model # description MAXIMUM diameter lbs. kg

Director’s Choice

DCS-PUD-2T DCS-PUD-3T DCS-PUD-4T DCS-PUD-5T DCS-PUDT-CS

#DCS-PUD-3T and

#DCS-PUD-3TH

two-tube dispenser 760W, 120V or 208V three-tube dispenser 900W, 120V or 208V four-tube dispenser 1200W, 120V or 208V four-tube dispenser 1520W, 120V or 208V cup/saucer dispenser, tubular type 500W, 120V or 208V

two-tube dispenser three-tube dispenser four-tube dispenser four-tube dispenser cup/saucer dispenser, tubular type

#DCS-PUD-4T and

#DCS-PUD-4TH

heater— dish/cup weight

dish/cup weight

91⁄8˝ (232mm) plates 150 68.0 71⁄4˝ (184mm) plates 165 74.8 71⁄4˝ (184mm) plates 180 81.6 91⁄8˝ (232mm) plates 210 95.3

117⁄8˝ (302mm) plates 160 72.6

#DCS-PUD-5T and

#DCS-PUD-5TH

91⁄8˝ (232mm) plates 220 99.8 71⁄4˝ (184mm) plates 270 122.5 71⁄4˝ (184mm) plates 320 145.2 91⁄8˝ (232mm) plates 350 158.8

117⁄8˝ (302mm) plates 240 108.9

Applicable *

Drop-In Dispenser

model #

359111 359109 359109 359111 359113

#DCS-PUDT-CS and

#DCS-PUDT-CSH

Applicable *

Drop-In Dispenser

model #

359129 359127 359127 359129 359131

* See Specification Sheet #EG33.18 for more information on Drop-In Dispensers.

Optional stainless steel front panel in lieu of laminate front panel available. To order, add suffix “-S” to model number. Example: DSC3030-CO-S Optional stainless steel end panels available. To order, add suffix “-SEP” to model number. Example: DSC3030-CO-S-SEP

EAGLE GROUP 100 Industrial Boulevard, Clayton, DE 19938-8903 USA Phone: 302-653-3000 • Fax: 302-653-2065 www.eaglegrp.com

Foodservice Division: Phone 800-441-8440

MHC/Retail Display Divisions: Phone 800-637-5100

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

Printed in U.S.A.

Rev. 07/09