Eagle DCS3-HS User Manual

Specification Sheet

Catalog Specification Sheet No.

Item No.:

Project No.:

S.I.S. No.:

Short Form Specifications

Eagle Director’s Choice®Heated Surface Unit, model
_______________. Top to be 16/304 stainless steel turned

1

down on all sides. 1

⁄2˝ square type 304 stainless steel
all-welded tubular base. Fully mobile with 5˝ poly tread casters,
two with brakes. Quick release spring loaded docking device
keeps adjoining units together. Heated surface top has
recessed aluminum top with blanket-type foil for uniform heat.
Thermostat control with a range of 80°F to 200°F, and ON/OFF
switch. Standard laminate front panel is holly berry red

®

(Wilsonart

#D307-60).

heated surface unit shown with optional tray slide

and optional laminate end panels

exclusive docking device joins units

together without the use of tools

Options / Accessories

Laminated end panels
Stainless steel end panels
Stainless steel front panels
Stainless steel tray slide*
Work shelf**
Rear doors and panels***

* Available in solid ribbed, square tubular or round tubular. For front, rear, or ends.

** Available in hardwood, stainless steel, poly, or Richlite

*** Available in hinged, solid, or louvered

Sneeze guards - single tier
Sneeze guards - double tier
Display lights for overshelf
Removable stainless undershelf
Specify laminate __________
Custom options (see EG8154)

®

. For front, rear, or ends.

Director’s Choice

®

Heated Surface Units

MODELS:

DCS3-HS
DCS4-HS

Design and Construction Features

• Top is solid, constructed of 16 gauge type 304 stainless
steel, die-formed, welded, and polished.

• Heated surface features recessed aluminum top with
blanket-type foil for uniform heat.

• Control thermostat with a range of 80° to 200°F
(27° to 93°C) and On/Off switch.

• Open-base frame features type 304 stainless steel apron
on operator’s side.

1

• Welded 1

⁄2˝ (38mm) type 304 stainless steel square

tubular base construction.

• Three working heights available—see Catalog Sheet EG33.07:

- 34˝ (864mm) standard working height complies with

ADA guidelines for accessibility standards.

- 30˝ (762mm) for middle schools.

- 28˝ (711mm) low profile for elementary schools and

nursing/healthcare facilities.

• Tray slide heights available—see Catalog Sheet EG33.07:

- 31˝ (787mm) standard height for high schools.

- 27˝ (686mm) standard height for middle schools.

- 25˝ (635mm) height for elementary schools and

nursing/healthcare facilities.

• Fully mobile - standard 5˝ (127mm) poly tread casters,
two with brake (brake casters on server side).

• Wired to cord and plug.

• Standard front holly berry red (Wilsonart
laminate mounted on 18 gauge galvanized subpanel.

• Quick-release spring-loaded docking device keeps adjoining
units together without the use of tools.

• All units accommodate optional accessories, including
tray slides, work shelves, and removable undershelves.
See Catalog Sheet EG33.07.

DCS5-HS
DCS6-HS

®

D307-60)

EG33.13

Director’s Choice

®

Heated Surface Units

EAGLE GROUP

Certifications / Approvals

100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]

CUSTOM-BUILT

MHC/Retail Display Divisions: Phone [phone]

For custom configuration or fabrication needs, contact our SpecFAB®Division.

Phone: [phone] • Fax: [phone] • e-mail: [e-mail]

EG33.13 Rev. 12/10

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2010 by the Eagle Group

EG33.13

Director’s Choice®Heated Surface Units

Catalog Specification Sheet No.

TOP VIEW

shown with optional laminate end panels.

Item No.:

Project No.:

S.I.S. No.:

Please note: 64˝ (1626mm) model

Receptacle

Configurations

Heated Surface Units

®

Director’s Choice

for 50˝-64˝

(1270-1626mm) units:

15 AMP 120V

FRONT VIEW (OPERATOR’S SIDE)

model # electrical data in. mm in. mm in. mm

length width length

DCS3-HS 120V, 7.4A, 885W 50˝ 1270 19
DCS4-HS 120V, 9.3A, 1110W 64˝ 1626 191⁄2˝ 495 54˝ 1372
DCS5-HS 120V, 11.1A, 1330W 78˝ 1981 191⁄2˝ 495 66˝ 1676
DCS6-HS 120V, 12.0A, 1440W 96˝ 2438 19

Optional laminate end panels available. To order, add suffix “-LEP” to model number. Example: DCS3-HS-LEP
Optional stainless steel front panel in lieu of laminate front panel available. To order, add suffix “-S” to model number. Example: DCS3-HS-S
Optional stainless steel end panels available. To order, add suffix “-SEP” to model number. Example: DCS3-HS-S-SEP

heated surface area

1

⁄2˝ 495 42˝ 1067

1

⁄2˝ 495 72˝ 1829

SIDE VIEW

furnished with

NEMA 5-15 plug

for 78˝-96˝

(1981-2438mm) units:

20 AMP 120V

furnished with

NEMA 5-20 plug

EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: [phone] • Fax: [phone]
www.eaglegrp.com

Foodservice Division: Phone [phone]

©2010 by Eagle Group

MHC/Retail Display Divisions: Phone [phone]

Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com

Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for

typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.

Printed in U.S.A.

Rev. 12/10