[ ET-CSWESU2-BK ]
www.eagle-techusa.com
Eagle | Consus W-Series
SATA to USB2.0 & eSATA
External Storage System
User Manual
Index
1 Getting Started
Package Contents …………………………………………...……. 02
System Requirements ………………………………………….. 03
Updating Your Operating System ……………………………... 03
Handling Precautions 03
2 Setting Up
Enclosure Components …………………………………………. 04
Hard Drive Installation ….……………………………………… 05
3 Connecting the External Hard Drive
Connecting the Cables …………………………………………. 09
Powering Up the Hard Drive ……..……………………………. 10
4 Partition & Format the Hard Drive
Windows …………………………………………………………….. 11
Mac OS v.10.2 + ………………………………………………… 14
5 Disconnecting the Hard Drive
Windows …………………………………………………………….. 17
Mac …………………………………………………………….. 18
6 Troubleshooting
FAQ – USB, Firewire & RAID Information ………………………. 19
FAQ – Installation ………………………………………….…….. 20
7 Appendix
Regulatory Compliance …………………………………………… 23
Warranty Information …………………………………………… 27
EAGLE | CONSUS Service and Support ……...………………… 28
Understand EAGLE TECH Sub-Brand ……...………………… 29
1
1 Getting Started
Thank you for purchasing EAGLE | CONSUS W-SERIES product. Eagle |
Consus W-Series SATA to USB2.0 & eSATA External Storage System. It will
not only save you money, but also space and time. This user manual provides
step-by-step installation instructions and other important information
regarding your EAGLE | CONSUS product. For the latest EAGLE |
CONSUS product information and news, visit our Web Site at
www.eagle-techusa.com
Package Contents
Eagle | Consus W-Series SATA to USB2.0 & eSATA External Storage
System
USB 2.0 cable
eSATA - eSATA cable
Installation CD
AC power adapter
User Manual
*
USB 2.0 host required for Hi-Speed USB 2.0 performance. USB 2.0 is highly recommended
because of the significant reduction in file transfer time compared to USB 1.1. To determine if
your system supports USB 2.0, refer to your USB controller card documentation or contact your
USB card manufacturer.
2
System Requirements
Hardware
Pentium
®
II, 200 MHz equivalent or newer for IBM compatible PC
PowerPC G4, 350 MHz or newer for PowerPC-based Apple Computer
Core
®
or newer for Intel-based Apple Computer
Available High Speed USB 2.0 port
SATA Hard Drive(s)
Software
Windows
Windows 2000 Pro / Server 2000 / Server 2003 / XP / Vista
Macintosh
®
®
Mac® OS X v.10.2+
Note: For highest performance and reliability, EAGLE | CONSUS
recommends that you install the latest service pack (SP) and updates.
Updating Your Operating System
Windows
Go to the Start menu and select Windows updates. For more information
regarding updating your system, visit windowsupdate.microsoft.com.
Macintosh
Go to the Apple menu and select Software Update. For more information
regarding updating your system, visit apple.com/macosx.
Handling Precautions
EAGLE | CONSUS products are precision instruments and must be handled
with care during unpacking and installation. Drives may be damaged by rough
handling, shock, or vibration. Be aware of the following precautions when
unpacking your Eagle | Consus external storage kit:
Do not unpack the product until you are ready to install it.
Do not drop or jolt the product.
Do not move the external storage when it is powered up.
3
2 Setting Up
You will need a 3.5 inch SATA Hard Drive. Carefully follow the procedure to
install the hard drive into the enclosure.
Note: For pre-installed Hard Drive EAGLE | CONSUS enclosure, please skip this
chapter and proceed to Chapter 3: Connecting the Drive.
EAGLE | CONSUS W-SERIES Front and Rear View
Power Switch – Turns the W-SERIES on / off
Hard Drive access light – Indicates hard drive activity
Power light – Indicates device is on
USB 2.0 port – Connects to a computer USB port or USB hub
eSATA port – Connects to a computer eSATA port
Power Input – Connects to the AC/DC power adapter
4
Hard Drive Installation
1. Remove 2 screws from the rear.
2. Unplug (D1A, Red-Black cable) HDD Access LED Connector and unplug
(D2A, Blue-Black cable) Power LED Connector from controller board.
5
3. Pull out the Disk Mounting Tray and slice in the SATA hard drive to the
SATA connector on the controller board.
4. Tighten up Hard Drives with 4 screws.
6
5. Plug in the (Red-Black Cable) “HDD Access LED” Connector to D1A and
(Blue-Black Cable) “Power LED” Connector to D2A on the controller
board.
6. Slide the Disk Mounting Tray into the Enclosure
7
7. Put the bezel back and tighten up with 2 screws at the rear.
8. External Hard Drive Installation Process Completed!
8
Loading...