Eagle CDTCIL-120-14-3 User Manual
Specification Sheet
Catalog Specification Sheet No.
Item No.:
Project No.:
S.I.S. No.:
Short Form Specifications
Eagle Clean Dishtables, model ___________. Top to be
16/430, 16/304, or 14/304 stainless steel, with all seams
welded, ground smooth, and polished. Front and ends to have
3˝-high upturn with 1
channels welded to underside. Backsplash is 8˝-high.
1
⁄2˝ standard opening for dishwasher. Legs to be 15⁄8˝ O.D.
20
galvanized tubing, 1˝ diameter crossbracing and adjustable
bullet feet (14/304 models come standard with stainless steel
hat channels welded to underside of table, stainless steel
crossbraced legs, and adjustable metal feet).
Options / Accessories *
Undershelf
Stainless steel legs
Stainless steel gussets
Stainless steel feet
1
⁄2˝-diameter rolled edge. Galvanized hat
right-hand model
Clean Dishtables—
Island Design
MODELS:
CDTCIL-48-16/4
CDTCIL-48-16/3
CDTCIL-48-14/3
CDTCIR-48-16/4
CDTCIL-48-16/3
CDTCIL-48-14/3
CDTCIL-60-16/4
CDTCIL-60-16/3
CDTCIL-60-14/3
CDTCIR-60-16/4
Design and Construction Features
• Corner design, left or right operation.
• 14 or 16 gauge stainless steel.
• Polished stainless steel worksurface.
• 30˝ (762mm)-wide table furnished in five lengths.
1
⁄2˝ (38mm) raised rolled rim on front and end.
• 1
5
• 1
⁄8˝ (41mm)-diameter galvanized legs with welded
1˝ (25mm)-diameter crossbracing.
• 8˝ (203mm)-high backsplash.
• Table has lip to fit most standard dishwashers.
• Adjustable non-marking bullet feet with up to
1˝ (25mm) adjustment.
• All Spec-Master
standard with stainless steel crossbraced legs and gussets,
complete with metal feet.
CDTCIR-60-16/3
CDTCIR-60-14/3
CDTCIL-72-16/4
CDTCIL-72-16/3
CDTCIL-72-14/3
CDTCIR-72-16/4
CDTCIR-72-16/3
CDTCIR-72-14/3
CDTCIL-96-16/4
CDTCIL-96-16/3
®
14 gauge type 304 dishtables come
CDTCIL-96-14/3
CDTCIR-96-16/4
CDTCIR-96-16/3
CDTCIR-96-14/3
CDTCIL-120-16/4
CDTCIL-120-16/3
CDTCIL-120-14/3
CDTCIR-120-16/4
CDTCIR-120-16/3
CDTCIR-120-14/3
EG50.08
Clean Dishtables—Island Design
* See Spec Sheet #EG50.07 for full line of options and accessories.
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
For custom configuration or fabrication needs, contact our SpecFAB®Division.
Phone: 302-653-3000 • Fax: 302-653-3091 • e-mail: specfab@eaglegrp.com
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group
Certifications / Approvals
EG50.08 Rev. 06/09
EG50.08
Clean Dishtables—Island Design
(see chart below)
Catalog Specification Sheet No.
TOP VIEW
Item No.:
Project No.:
S.I.S. No.:
Clean Dishtables—Island Design
16 gauge 16 gauge 14 gauge length
type 430 type 304 type 304
model # model # model # description in. mm lbs. kg
CDTCIL-48-16/4 CDTCIL-48-16/3 CDTCIL-48-14/3 left-hand model 48˝ 1219 118 53.5
CDTCIR-48-16/4 CDTCIR-48-16/3 CDTCIR-48-14/3 right-hand model 48˝ 1219 118 53.5
CDTCIL-60-16/4 CDTCIL-60-16/3 CDTCIL-60-14/3 left-hand model 60˝ 1524 128 58.1
CDTCIR-60-16/4 CDTCIR-60-16/3 CDTCIR-60-14/3 right-hand model 60˝ 1524 128 58.1
CDTCIL-72-16/4 CDTCIL-72-16/3 CDTCIL-72-14/3 left-hand model 72˝ 1829 138 62.6
CDTCIR-72-16/4 CDTCIR-72-16/3 CDTCIR-72-14/3 right-hand model 72˝ 1829 138 62.6
CDTCIL-96-16/4 CDTCIL-96-16/3 CDTCIL-96-14/3 left-hand model 96˝ 2438 157 71.2
CDTCIR-96-16/4 CDTCIR-96-16/3 CDTCIR-96-14/3 right-hand model 96˝ 2438 157 71.2
CDTCIL-120-16/4 CDTCIL-120-16/3 CDTCIL-120-14/3 left-hand model 120˝ 3048 172 78.0
CDTCIR-120-16/4 CDTCIR-120-16/3 CDTCIR-120-14/3 right-hand model 120˝ 3048 172 78.0
FRONT VIEW
EAGLE GROUP
100 Industrial Boulevard, Clayton, DE 19938-8903 USA
Phone: 302-653-3000 • Fax: 302-653-2065
www.eaglegrp.com
Foodservice Division: Phone 800-441-8440
MHC/Retail Display Divisions: Phone 800-637-5100
Spec sheets available for viewing, printing or downloading from our online literature library at www.eaglegrp.com
Although every attempt has been made to ensure the accuracy of the information provided, we cannot be held responsible for
typographical or printing errors. Information and specifications are subject to change without notice. Please confirm at time of order.
Spec-Master
SIDE VIEW
®
(Dimension A)
weight
Printed in U.S.A.
©2009 by Eagle Group
Rev. 06/09
Loading...