Dynexproducts DX-U34H41, DX-U27H41 Quick Start Manual

Before using your new product, please read these instructions to prevent
any damage.
USB 2.0 7-Port Hub /
USB 3.0 4-Port Hub
DX-U27H41 / DX-U34H41
Package contents
• USB 2.0 7-Port Hub
-or­ USB 3.0 4-Port Hub
• AC adapter 5V/3.6A
• USB cable
Quick Setup Guide
System requirements
• Computer with a USB 2.0 or 3.0 port
Note: USB 3.0 is compatible with USB 2.0,
however data transfer speed will be limited to the 2.0 level.
• Latest version of Windows® 8, Windows® 7, Windows Vista®, or Windows® XP; or Mac OS X 10.4 or later
DX-U27H41
Upstream port (to computer)
LED
Downstream ports (to devices)
DX-U34H41
Upstream port (to computer)
LED
Downstream ports (to devices)
DC jack
DC jack
Features
• Backwards compatible with previous-generation USB revisions
Adds expansion ports with supplemental power to your computer
• Blue LED power indicator
• Supports hot-swappable and Plug & Play capability
• Supports over-current protection at USB host port
QUICK SETUP GUIDE
Installing your hub
Note: When you connect your hub to a
computer, the computer detects your hub and automatically installs the driver.
1 Connect the smaller end of the USB
cable to the upstream port on the rear of the hub, then connect the larger end of the USB cable to an open USB port on your computer.
DX-U27H41
DX-U34H41
2 Plug the AC power adapter into your
hub’s DC jack and into a power outlet.
3 Connect your USB devices into your
hub.
Note: Do not disconnect from your
computer or USB device during data transfer. Doing so may corrupt your data or damage your devices.
One-year limited warranty
For complete warranty, visit www.dynexproducts.com.
Contact Dynex:
For customer service, call 1-800-305-2204 (U.S. and Canada) or 01-800-926-3020 (Mexico) www.dynexproducts.com
DYNEX is a registered trademark of BBY Solutions, Inc. Registered in some countries. Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richeld, MN 55423 U.S.A. ©2013 BBY Solutions, Inc. All Rights Reserved.
V1 ENGLISH 13-0733
Loading...