Dynexproducts DX-TVM112 User Manual

DX-TVM112

TV Wall Mount

ASSEMBLY GUIDE

For either wood-stud or
concrete wall installations

Safety information and specifications . . . . . . . . . 2

Tools needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Package contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation instructions . . . . . . . . . . . . . . . . . . . . . . . 4

2

Safety information and specifications

IMPORTANT SAFETY INSTRUCTIONS ­SAVE THESE INSTRUCTIONS

CAUTION: Do not use this product for any

purpose not explicitly specified by Dynex.
Improper installation may cause property
damage or personal injury. If you do not

understand these directions, or have
doubts about the safety of the installation, contact
Customer Service or call a qualified contractor. Dynex is not
responsible for damage or injury caused by incorrect
installation or use.

The weight of your TV must not exceed 50 lbs. (22.7 kg). The
wall must be capable of supporting five times the weight of
your TV and wall mount combined.
This product contains small items that could be a choking
hazard if swallowed. Keep these items away from young
children!

Safety information and specificationsDX-TVM112

Maximum TV weight: 50 lbs. (22.7 kg)
Screen size: 26" to 40" diagonal
Overall dimensions (W × H ):

15.5 × 12.61" (393.7 × 320.3 mm)

Wall-mount weight: 3.8 lb
We’re here for you

www.dynexproducts.com
For customer service, call:
800-305-2204 (U.S./Canada markets)

Tools needed

You will need the following tools to assemble your new TV wall mount:

ardware

Edge-to-edge stud
finder

Phillips screwdriver

Pencil

Socket wrench with 1/2"
(13 mm) socket or
adjustable wrench

Level

Drill

7/32" (5.5 mm) wood drill bit
for wood stud wall

OR

3/8" (9.5 mm) masonry drill
bit (concrete only)

Measuring tape

Hammer

Package contents

Package contents

Make sure that you have all the hardware necessary to assemble your new TV wall mount:

A Wall Plate (1)
B Left TV Bracket (1)
C Right TV Bracket (1)

DX-TVM112

3

TV Hardware Bag

Label Hardware Qty.

D4

E4

F4

G4

A

M4 × 12 mm
screw

M4 × 30 mm
screw

M4 washer

M6 washer

B

Label Hardware Qty.

L4

M3

N3

M6 spacers

5/16" × 2 3/4" lag bolt

C

Lag bolt washer

H4

I4

J4

K4

M4 spacers

M6 × 12 mm
screw

M6 × 20 mm
screw

M6 × 35 mm
screw

1234in

10 20 30 40 50 60 70 80 90 100mm

O3

Concrete anchor

4

Installation instructions

STEP 1 - Determine wall-mount location

Notes:

• For more detailed information on determining where to drill your holes, visit our online height-finder at:
http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder

• Your TV should be high enough so your eyes are level with the middle of the screen. Normally, 40 to 60 inches from the
ground.

The center of your TV will match the center of the wall plate (A). Before you drill holes in the wall:

1 Measure the distance from the bottom of your TV to the middle (half of the height of the TV). This is

measurement a.

2 Measure the distance from the floor to where you want the bottom of the TV to be placed on the wall. Keep in

mind that the bottom of the TV should be placed above any furniture (such as entertainment centers or TV
stands). The TV should also be above items placed on top of the furniture (like a Blu-ray player or cable box).
This measurement is b.

3 Add a + b. The total measurement is the height where you want the center of the wall plate to be on the wall.
4 Use a pencil to mark this spot on the wall.

Installation instructionsDX-TVM112

You’ ll ne ed

a

A

b

B

Measuring tape

Pencil