Dynex DX-24E150A11 User Manual
24" LED-LCD TV
Front features
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver or game station
Using HDMI (best)
Back of TV
Connecting to a computer
Back of TV
Computer
QUICK SETUP GUIDE
DX-24E150A11
Remote control
and
2 AAA batteries
Composite video
cable
Remote control
sensor
Power indicator
Volume
+/-
Menu
Channel
+/-
Power button
Input
Installing the stand
1 Remove the stand, stand column, and screws from the box.
2 Lay the TV at (screen down) on a at, cushioned surface. Align the bottom side
of the TV with one edge of the table.
3 Insert the stand column into the TV stand and secure it with the three stand
column screws.
Smaller screws (3)
Stand column
HDMI device
Using component (better)
Component video device
HDMI cable
(not included)
Component
video cable
Back of TV
Audio cable
(stereo mini plugs)
Connecting headphones
D-Sub cable (analog RGB)
Back of TV
TV stand and screws
Quick Setup Guide
4 Align the holes in the stand with the holes on the stand column, then secure the
stand to the column with the larger screw provided.
Important: The wide portion of the stand should go towards the front of the TV.
Large screw
Stand
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Remove the three screws holding the stand column to your TV, then remove the
stand and the stand column.
3 Secure the wall-mount bracket (not included) to the back of your TV using the
four screws provided with the bracket.
Component audio cable
(not included)
Note: Cable connectors and jacks are often color-coded. Match the colors when
you connect the AV cable.
Connecting an antenna
Connect a 75 ohm cable (not included) to the ANT/CABLE IN jack on the back of
your TV and the RF OUT jack on the antenna.
Back of TV
Antenna, cable TV,
or satellite RF jack
75-Ohm coaxial cable
Connecting a VCR, camcorder, or game
(good)
Connecting power
Connect the power cable to a power outlet.
Power cord
Power outlet
WE ARE GOING GREEN!
A copy of the User Guide is not provided in the box
but is available at www.dynexproducts.com
Setting up your remote control
1 While pressing the release button on the
battery compartment cover on the back
of the remote, lift the cover o the remote.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and symbols on the batteries align with the
+ and – symbols in the battery compartment.
3 Replace the cover.
To program your existing remote control to work with your Dynex TV, see the table
below for common codes. If you have problems programming your remote, or
need a dierent remote control code, visit www.dynexproducts.com for the latest
remote control code information.
Universal remote control TV codes (for all Dynex TVs manufactured after Jan. 1, 2007)
Universal remote control makers and models Set-top box makers and models
Philips
PHDVD5, PH5DSS,
PMDVR8, PDVR8
115
RCA
RCU807
135
One for All
URC-6690
0464
Sony
RM-VL600
8043
Comcast
M1057
0463
Dish Network
VIP508, VIP622
720
Motorola
DRC800
0463
TIVO
Series 3, HD
0091
DirectTV
RC23
10463
Back of TV
Back of VCR
AV c abl e
Back of camcorder
or game
Note: Cable connectors and jacks are often color-coded. Match the colors when
you connect the AV cable.
Turning on your TV for the rst time
1 Plug in your TV and turn it on. The initial Setup Wizard opens.
Choose your menu Language
English
Français
Español
2 Press or to select the menu language you want, then press ENTER.
The Time screen opens.
Time
Mode
Daylight Savings
Year
Month
Day
Date/Time
Auto
cificaPenoZ emiT
2000
Jan
13
12 : 07 AM
Setup Wizard
Setup Wizard
10 Press when you have made your selection. The channel scan screen
opens.
If you selected Antenna or Cable, your TV automatically scans for available
channels in your area and stores the channel information in the channel list.
This may take several minutes. While scanning, the TV displays a progress
report.
– OR –
If you selected Cable/Satellite Box, the auto scan is not necessary and the
screen will ask you to select the correct input source for your set top box.
Press EXIT to close the menu.
11 Select the corresponding video input source through the INPUT SOURCE menu.
Selecting the video input source
1 Turn on your TV, then press the INPUT key on the remote, or the INPUT button
on the TV. The Source List menu opens.
On-screen menu overview
PICTURE menu
PICTURE AUDIO CHANNELS SETTINGS
Mode
Brightness
Contrast
Color
Tint
Sharpness
Advanced Video
AUDIO menu
Sound Mode
Treble
Bass
Balance
Surround
MTS/SAP
Audio Language
Energy Savings
48
57
70
0
6
PICTURE AUDIO CHANNELS SETTINGS
Standard
50
40
0
Stereo
English
One-year limited warranty
Visit www.dynexproducts.com for details.
Need additional help?
See your User Guide! This comprehensive guide includes
everything from basic how-to steps to more advanced
features. Go to www.dynexproducts.com to download a
copy of your User Guide.
3 Press or to highlight Mode, then press or to select Manual (to set
the date and time manually), or Auto (the date and time are automatically set
by the TV signal source, based on the time zone you select).
4 Press or to highlight Time Zone, then press or to select your time
zone. You can select Pacic, Alaska, Hawaii, Atlantic, Eastern, Central, or
Mountain).
5 If your viewing area observes daylight savings time, press or to highlight
Daylight Savings, then press or to select On.
6 If you selected Manual mode, make the settings as follows:
• Press or to highlight Year, Month, or Day, then press or
to adjust the setting.
• Set the time by pressing or to highlight
Date/Time, then press or
to highlight the hour, minute, or AM/PM eld. Press or to adjust the
setting.
7 Press ENTER. The Choose your Picture Mode screen opens.
Setup Wizard
Choose your Picture Mode
Home Mode
Retail Mode
2 Press or to highlight the video source, then press ENTER. You can also
select the input source using the following remote control buttons:
• TV–Press to switch to TV mode.
Adjusting the volume
• Press VOL+ or VOL- to change the volume.
• Press MUTE to turn o the sound.
Selecting a channel
• To move to a dierent channel in the channel list, press CH^ or CH^.
OR
• Enter the channel number directly using the number buttons.
Press to change
the volume.
Press to change
the channel.
SETUP menu
PICTURE AUDIO CHANNELS SETTINGS
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Audio Only
Auto Zoom
Channel Strength
CHANNEL menu
PICTURE AUDIO CHANNELS SETTINGS
Parental Controls
Menu Settings
Time
Closed Caption
Input Labels
Computer Settings
Reset to Default
WGBH-SD
On
We’re here for you
www.dynexproducts.com
For customer service, call:
800-305-2204 (U.S./Canada markets)
01 800-926-3020 (Mexico market)
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN USA 55423-3645
Best Buy Imports, S. de R.L. de C.V. Av. Santa Fe 485, Segundo Piso,
Colonia Cruz Manca, Programa Parcial de Desarrollo Santa Fe,
Delegación Cuajimalpa, Distrito Federal, México 05349
RFC#BBI0802114Q2
© 2010 BBY Solutions, Inc., All Rights Reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of their
respective owners.
8 Press or to select Home Mode or Retail Mode, then press ENTER.
If you select Home Mode, the Choose your TV source screen opens.
-ORIf you select Retail Mode, a message stating “Are you sure you want Retail
mode? Since in this mode Energy saving is not realized.” appears. Select Yes to
proceed or No to exit.
Setup Wizard
Choose your TV source
Antenna
Cable
Cable/Satellite Box
Analog Channels
0
Digital Channels
0
9 Press or to select Antenna, Cable, or Cable/Satellite Box, depending
on the type of connection you have.
• If you are using an antenna for a standard or HD TV signal, select Antenna.
• If your cable is connected directly to the TV (without a tuner box), select
Cable.
• If your cable is connected to your TV through a tuner box, select
Cable/Satellite Box.
Viewing channel information
• Press INFO to view an information banner.
The information banner shows the current
program information such as channel
number, video input source, and resolution.
• Digital mode information—Displays the
channel number, station name, channel
label, broadcast program name, TV rating,
signal type, audio information, resolution,
CC mode, current time, and current
program start and end times.
• Analog mode information—Displays
channel number, channel label (if preset),
signal type, audio information, and
resolution.
• Press GUIDE to show the digital program guide, which may view a list of
available programs, program times, and program summaries, depending on the
information provided by the broadcaster.
Navigating menus with your remote control
Press to display
the main menu.
Press to select the
menu items.
Press to return to
the previous screen.
Press to select menu items,
to adjust selected items, or
to move the on-screen
cursor left or right.
Press to conrm your
selection or enter a
sub-menu.
Press to close
the menu.
ENGLISH 10-0933
24" LED-LCD TV I QUICK SETUP GUIDE I DX-24E150A11
09-0xxx
Loading...