Dynex DX-15L150A11, DX-19L150A11, DX-22L150A11 User Manual
Front and side features
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver or game station
Using HDMI (best)
Back of TV
Connecting an antenna
Connect a 75 ohm cable (not included) to RF jack on the back of your TV and
the RF OUT jack on the antenna.
Back of TV
15”/19“/22” LCD TV
QUICK SETUP GUIDE
DX-15L150A11/DX-19L150A11 /DX-22L150A11
Power
indicator
Remote
control sensor
Installing the stand
1 Remove the stand from the box and place it on a table or bench.
2 Lay the TV on a at, cushioned surface.
3 Carefully align and insert the base into the stand until the locking
mechanism clicks into place.
ANT/CABLE IN
HDMI device
Using component (better)
ANT/CABLE IN
HDMI cable
(not included)
ANT/CABLE IN
ANT/CABLE IN
Connecting a home theater system
Using analog audio cable:
Back of TV
ANT/CABLE IN
ANT/CABLE IN
Remote
control and 2
AAA batteries
TV stand and 4 M4 screws
AC power
cord
L/R Audio cable
Component
video cable
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Remove the three screws holding the TV to its stand column, then remove
the stand column.
Locating grooves
3 Insert and lock the stando screws (provided) into into the 4 holes on the
back of the TV..
4 Secure the wall-mount bracket to the back of your TV by screwing four M4
screws provided with the bracket into the stando screws you just
installed.
ANT/CABLE IN
Component video device
Using S-video (fair)
ANT/CABLE IN
Audio Cable
Back of TV
Component
video cable
Back of TV
AUDIO IN
Audio Cable
Note: Cable connectors and jacks are often color-coded.
Match the colors when you connect the AV cable.
Using digital audio cable:
AUDIO IN
ANT/CABLE IN
ANT/CABLE IN
Note: The DIGITAL OUTPUT jack only works with digital TV channels.
Back of TV
Quick Setup Guide
Setting up your remote control
1 While pressing the release button on the battery compartment cover on
the back of the remote, lift the cover o the remote.
2 Insert two AAA batteries into the battery compartment. Make sure that the
+ and – symbols on the batteries align with the + and – symbols in the
battery compartment.
3 Replace the cover.
To program your existing universal remote control to work with your new
Dynex TV, see the table below for common codes. If you have problems
programming your remote or need a dierent remote control code, visit
www.dynexproducts.com for the latest remote control code information.
DirectTV
RC23
10463
Philips
PHDVD5, PH5DSS,
PMDVR8, PDVR8
115
Universal remote control TV codes
Universal remote control makers and models Set-top box makers and models
RCA
RCU807
135
One for All
URC-6690
0464
RM-VL600
8043
(for all Dynex TVs manufactured after Jan. 1, 2007)
Sony
Comcast
M1057
0463
Dish Network
VIP508, VIP622
720
Motorola
DRC800
0463
Series 3, HD
TIVO
0091
ANT/CABLE IN
Video device
Connecting a Computer
Back of TV
ANT/CABLE IN
ANT/CABLE IN
ANT/CABLE IN
S-video cable
Connecting power
Connect the power cable to the AC IN jack on the back of the TV, then
connect the other end to a power outlet.
Turning on your TV for the rst time
1 Plug in your TV and turn it on. The initial Setup Wizard opens.
Selecting the video input source
1 Press INPUT, press or to highlight a source, then press ENTER. You
can also press any of the video source buttons directly.
Adjusting the volume
•
Press VOL+ or VOL- to change the volume.
•
Press MUTE to turn o the sound.
Selecting a channel
• To move to a different channel in the channel list, press CH^ or CHv.
OR
• Enter the channel number directly using the number buttons.
On-screen menu overview
PICTURE menu
One-year limited warranty
Visit www.dynexproducts.com for details.
Need additional help?
AUDIO menu
See your User Guide! This comprehensive guide includes
everything from basic how-to steps to more advanced
features.
2 Press or to highlight an option and press or to change the
setting. Options include:
Setup Wizard
Mode
Time Zone
Daylight Savings
Year
Month Jan
MOVE SELECT PREVIOUS
ENTER MENU
Time
Auto
Pacitic
On
2010
1Day
12 : 04 AMTime
Mode-Select Manual to set date/time manually or
Auto to have them set automatically.
Time Zone-Select your time zone
Daylight Savings-If your area uses daylight savings
If you select Manual, press or to highlight an option, then press
or to change the setting.
3 When you are done, press ENTER to move to the next screen.
The Choose your Picture Mode screen opens.
Press to
change the volume.
Press to change
the channel.
Viewing channel information
• Press INFO to view an information banner. The information banner shows the current
program information such as channel number, video input source, and resolution.
• Digital mode information—Displays the channel number, station name, channel
label, broadcast program name, TV rating, signal type, audio information,
resolution, CC mode, current time, and current program start and end times.
• Analog mode information—Displays channel number, channel label (if present),
signal type, audio information, and resolution.
• Press GUIDE to show the digital program guide, which may display available
programs, program times, and program summaries, depending on the information
provided by the broadcaster.
SETTINGS menu
CHANNELS menu
We’re here for you
www.dynexproducts.com
For customer service, call:
1 800-305-2204 (U.S./Canada markets)
01 800-926-3020 (Mexico market)
Distributed by Best Buy Purchasing,LLC
7601 Penn Avenue South, Richeld, MN USA 55423-3645
Best Buy Imports, S. de R.L. de C.V. Av. Santa Fe 485, Segundo Piso, Colonia
Cruz Manca, Programa Parcial de Desarrollo Santa Fe, Delegación
Cuajimalpa, Distrito Federal, México 05349
RFC#BBI0802114Q2
© 2009 BBY Solutions, Inc.
All rights reserved. DYNEX is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names are
trademarks of their respective owners.
4 Press or to highlight Home Mode (recommended) or Retail Mode.
If you selected Home Mode, the Choose your TV source screen opens.
5 Press or to highlight Antenna, Cable, or Cable/Satellite Box,
then press . If you selected Antenna or Cable, your TV automatically
scans for available channels. If you selected Cable/Satellite Box, you are
asked to select the correct input source for your set top box.
6 Press EXIT to close the menu, then select the input source through
the INPUT SOURCE menu.
Navigating menus with your remote control
Press to move the cursor
on the screen or to
adjust a selected icon.
Press to conrm a
selection or to enter
a sub-menu.
Press to close the menu.
Press to open the
on-screen menu.
Press to select
menu options.
Press to return to the
previous menu.
ME N U
ENTER
ENTER
ME N U E XI T
ENTER
English 09-1037
09-0xxx
15” • 19” • 22” LCD TV I QUIC K SE TUP G UI DE I DX-15L 15 0A1 1/ DX-19L 15 0A1 1 /DX-22 L150A 11
Loading...