DynaVox T10 Accessible Case
Installation Instructions
Thank you for purchasing the accessible case for the DynaVox T10! The accessible case consists of
three main parts:
a. Colored trim rings (Choose one of the five colors provided, unless you are using a
keyguard.)
b. Snap cover (black)
c. Rubber boot with tri-fold cover (black)
KEYGUARD USERS
The keyguard insert replaces the colored trim ring. If you already have a keyguard installed, you do not
need to remove it – the keyguard and snap cover are the same parts you would use for a and b above.
Installation of the accessible case is straightforward as shown in the following diagram
Items shown in diagram to the left:
1. DynaVox T10
2. Colored trim ring (or keyguard insert)
3. Snap cover (black)
4. Rubber boot with tri-fold cover (black)
1. Place the colored trim ring inside the window area of the snap cover. Register the two
openings for the washers at the bottom and the opening for the ON button at the top. The trim
ring will self-register and fill the recess for the keyguard when placed on the tablet.
KEYGUARD USERS
If you are using a keyguard, place the keyguard insert (the acrylic part with the holes) into the Snap
Cover instead of the colored trim ring.
2. Next, install the snap cover and colored trim ring (or keyguard) onto the DynaVox T10. The
snap cover snaps on, and the trim ring will self-register.
Accessible Case Installation- DynaVox T10 1
Part # 401439-A
3. Finally, insert the speaker grill side of the DynaVox T10 into the rubber boot - matching the
speakers to the openings in the boot, and work around the perimeter, stretching the boot
to fit and roll up over the snap cover.
Congratulations, you have successfully installed the DynaVox T10 accessible case!
Using the Accessible Case for the DynaVox T10
1.
2.
1. The cover can be folded up into a triangle and rolled under the tablet to serve as a prop
when used on a hard surface if desired.
2. The Tri-fold Cover can be folded or used to cover the screen as shown. The cover has
magnets that will secure the flap to the rubber boot when the DynaVox T10 is not in use.
2 DynaVox
Loading...