DYNAPACE Heavy Duty Incline Wave Feed Conveyor User Manual
ITE 300 H30
Incline Wave Feed Conveyor
Module: ITE-300 H30 30”L Manual Incline (6 degree angle) (20" wide capable) C17437
Frame Style:
Description:
S tandard Features:
Programmable logic controller (PLC) (available as continuous run without PLC)
Fixed incline angle (6 degrees)
Adjustable height 30"- 34" (762 – 864mm) (entrance side 32” (813) plus/minus 2” (51mm) 6 degrees)
Variable speed (2 - 25 fpm) (.61 – 7.6 mpm)
Precision slide for quick width adjustment
Heavy duty rail set with 1”(51mm) HTD belt for heavy weight durability
Operator controls (E-stop, Reset)
Control box flush to front frame
Left to right travel, front fixed rail
Designed for minimal maintenance
ESD grounding receptacles
Painted sheet metal panels, “Dynapace White”
Conforms to SMEMA Spec. 1.2 and NFPA 79
Includes 1 standard communication cable
Product Handling Capability:
Edge Contact:
Length:
Width:
Thickness:
Weight:
Above board clearance:
Below board clearance:
Facilities Requirements:
Electrical:
Air:
Footprint: 30"L by 36" W (762L by 914mmW)
Precision welded steel framing with painted panels
Edge carry adjustable incline feed conveyor is designed for easy set-up
and alignment. This conveyor is used to feed wave solder machines.
Positioned at 6 degrees and has heavy duty belt rails capable of handling
pallets up to 20 lbs. each.
0.187” (5mm) Others Available
3” – 18” (76 – 457mm)
3.5" - 20" (89 – 508mm)
0.031” (7874mm) minimum
Up to 20 lb. (9.07kg) per foot
1.0 (51mm)
.50” (25.4mm)
115 VAC/60Hz 15 amp
N/A
PO Box 7 Palatine, IL 60078 • 847-398-5757 • Sales Fax 847-852-3377• www.dynapace.com
082005
People and Products You Can Rely On
Loading...