BLE 300 18
|
Bare Board Loader – 18” Stack |
Module: |
BLE-300 18 Bare Board Loader – 18” (457mm) Stack |
Frame Style: |
Precision welded steel framing with painted panels |
Description: |
The BBL is designed to pick printed circuit boards from a stack, place them |
|
on a set of conveyor rails, and deliver them downstream. |
Standard Features:
Can operate to load bare boards, or transfer product through
Programmable Logic Controller
New clamshell design allows for full access
Variable speed (10-30 fpm) (3 – 9.1mpm)
Precision slide quick width adjustment
Operator controls (E-stop, start/reset, cycle stop, pass through - yes/no, purge) Single color light tower
Audible alarm
Interlocked safety cover
High Capacity – Walk in doorway allows for easy loading of up to 18 inches of product Left to right travel, front fixed rail
Enhanced vacuum pick-up system (each cup independent) Quick set-up for aligning lift cups to PCBs
ESD grounding receptacles
Painted sheet metal panels, “Dynapace White” Conforms to SMEMA Spec. 1.2 and NFPA 79 Includes 1 standard communication cable
Product Handling Capability:
Edge Contact: |
|
0.187” (4.78mm) |
Length: |
|
5” – 18” (127mm - 457mm) |
Width: |
|
3.5” – 18” (89mm - 457mm) |
Thickness: |
|
0.031” (.787mm) minimum |
Weight: |
|
Up to 5 lbs (2.7kg) per foot |
Above board clearance: |
1” (25mm) |
|
Below board clearance: |
0.5” (13mm) |
|
Facilities Requirements: |
||
Electrical: |
115 VAC/60 Hz 15 amp |
|
Air: |
60 PSI |
5CFM |
Line height: |
37” +/- 1” (940mm +/- 25.4mm) |
|
Footprint: |
48”W X 24" L. X 47" H |
|
|
(1219mm W x 609mm L x 1194mm H) |
People and Products You Can Rely On
PO Box 7 Palatine, IL 60078 • 847-398-5757 • Sales Fax 847-852-3377 • www.dynapace.com
C17181 |
082005 |