DYNAPACE Flat Belt Conveyor User Manual
TCF & FCF Flat Belt Conveyors
18”or 24”Wide Belt, PLC Control or Continuous Run
Available
Lengths:
Frame Style:
Description:
FCF-118/124 Feed Conveyors includes:
Continuously running belt
Custom lengths available
ESD safe, high temperature belt on a Stainless Steel bed
Variable speed (1-12 fpm) (.3 – 3.66 mpm) others available
Low maintenance design
Operator controls (E-Stop, Reset)
Left to right travel
ESD grounding receptacles
Painted sheet metal panels, “Dynapace White”
Conforms to NFPA 79
TCF-118/124 Transfer Conveyors also includes:
Programmable logic controller with look across sensors
Operator controls (E-Stop, Reset, Audit/Bypass)
Conforms to SMEMA Spec.1.2
Includes 1 standard communication cable
P roduct Handling Capability:
Edge Contact:
Length:
Width:
Thickness:
Weight:
Above board clearance:
Below board clearance:
F acilities Requirements:
24”
(610mm)
96”
(2438mm)
168”
(4267mm)
Precision welded steel frame with heavy duty extruded aluminum cross members
TCF-118/124 with PLC, FCF-118/124 Continuous Run (no PLC), Single drive belt conveyor
used where product requires full support. Available in 18” (118) or 24”(124) widths. Custom
lengths and widths available.
36”
(914 mm)
108”
(2743mm)
180”
(4572mm)
48”
(1219mm)
120”
(3048mm)
192”
(4877mm)
60”
(1524mm)
132”
(3353mm)
204”
(5181mm)
(1829mm)
144”
(3658mm)
216”
(5486mm)
5/8” (15.87mm) nose-bar at in feed (8” long)
5/8” (15.87mm) nose-bar at out feed (8” long)
N/A
3” – 24” (76mm - 609mm)
2” – 16” / 22” (51mm – 406 / 559mm)
0.156” (4mm) minimum
Varies by length and number of product on belt.
N/A
N/A
“Belt Full” logic package (includes 3 air,
light tower and audible alarm with sp
p
rogramming)
Look down sensors (bridge array)
Built in Storage Compartment
Note: Nose-bar option not av length ailable on 24”
model.
Only one nose bar may be installed; In or Out
72”
84”
(2134mm)
156”
(3962mm)
228”
(5791mm)
Conveyor Options
rd
sensor p
ecial PLC
Electrical:
Air:
Line height:
Footprint:
PO Box 7 Palatine, IL 60078 • 847-398-5757 • Sales Fax 847-852-3377 • www.dynapace.com
C17190-XX 082005
115 VAC/15 amp
N/A
37” +/- 2” (940mm +/- 51mm)
with 6” above floor clearance for facility
track
xx”L x 29”W / 35”W
(xxmm L x 737mm / 889mm W)
People and Products You Can Rely On
Loading...