Dynamax Consoles MX12E, MX8E, MX18EW, MX16EW, MX12EW User Manual

DYNAMAX® MX Series

FIDELIPAC®

Fidelipac Broadcast consoles have earned a reputation for reliable performance throughout the world. Ease of installation combined with steel construction and serviceability provide years of hassle free operations. A simple user friendly control surface eliminates confusion. Two frame sizes offer a range of 6 to 18 channels. Foremost among its features is the true modular construction of the MX, with interchangable modules carrying all of the channel electronics, no active components are mounted on the consoles input motherboard. The use of Voltage Controlled Amplifiers (VCAs) eliminate scratchy, noisy input faders and level controls. Gold-plated edge connectors provide highly reliable motherboard connections. The fully modular input mixers can be removed quickly and replaced, without shutting down console operations.

Model MX18E

The Right Features

The Dynamax MX Series is a true breakthrough in the field of cost-effective audio mixing consoles. Never before has such a combination of quality and features been offered at such an affordable price.

MX Series consoles have a spacious, easy to use layout, and are available with either rotary or linear faders. MXR consoles are available with 6 to 12 rotary faders. MXL consoles offer from 6 to 12 linear faders mounted three inches apart. MXE consoles permit 10 to 18 linear faders mounted two inches apart.

All modules feature a virtually indestructible control surface overlay, far more durable than paint or silk-screening, ensuring that your MX Series console will look as good as new for years to come.

The standard count-up event timer can be triggered by turning on any module.A full range of actively switched cue and monitoring functions is provided, including a built-in cue amplifier and speaker, and an amplified headphone output. Internal jumpers allow configuration of monitor muting and dimming to meet your operational requirements.

The MX Series uses the highest quality components and construction techniques, resulting in excellent RF immunity and a rugged, sturdy product that will last many years. High performance Bi-FET op amps provide superior audio while substantially reducing heat.The console’s modular design and hinged hood simplifies routine maintenance and allows quick, easy access to all console circuitry.

•True Modular Design

•Ultra-reliable motherboard construction

•VCA mixer and monitor control

•Active balanced line inputs

•Active balanced main monitor outputs

•Full monitoring/cueing facilities with VCA level control and active source selection

•Built-in cue amp with speaker and amplified stereo 8-ohm headphone output

•Independent level controls for each ‘A’and ‘B’input

•Independent remote start for each ‘A’ and ‘B’input

•Opto-isolated remote module on/off

•Selectable fader start (Optional in MXR Rotary Consoles)

•Two inputs per module, mic/line or line/line - line

inputs may be mono or stereo, consumer or professional format

•Available in 6 through 18 channel models

•Two input expansion switches standard

•Separate audio and logic power supplies

•Sturdy, all-steel construction

•Four assignable outputs - two stereo plus two mono

•Durable Lexan overlay control surfaces

•Rotary or linear faders

•Count-up event timer standard

•Excellent RF immunity