Dynacord PowerMax PM 2600 User Manual

190.79 Kb
Loading...

Systems

ENGLISH3&5

requirements for modern

 

HIGHEST audio installations regarding

2-way installations with additional

only be achieved using active multi-component loudspea-

ACTIVE offer the best price-performance

their sound pressure level, coverage and sound quality can

sub woofer systems probably

ker systems where the audio signal’s individual frequen-

ratio. The low frequency range of the audio signal is

cy ranges are separately amplified and reproduced.

reproduced by the sub woofers while high-quality full

 

range cabinets take care of the Mid/Hi frequencies and

 

vocals.

 

System

 

2 x F120

3

THE PowerMax 3 system - the

2 x F5

 

PM2600

 

4 x Speakon system cable 15m

direct successor of the legendary

2 x loudspeaker stand poles

P3 Systems - consists of two 12“

2-way cabinets F120, two 15“ sub woofers F5, one system power amplifier PM2600, four system cables and two loud-speaker stand poles. So, this compact, active 2-way system is ready for operation. The system power amplifier includes the PowerMax controller and provides 2 x 700 W in the bass and 2 x 600 W in the Mid/Hi range. The system cabling ensures quick and easy installation and highest operational reliability. It is possible to operate two Mid/Hi cabinets and two sub woofers per stereo side on a single PM2600.

3 year warranty.

PowerMax system: F5 & F120 on a PM2600

 

F5 & F120

 

System

 

 

3 F120

F5

ONE of the essential advantages when using active 2-way systems with additional sub woofers lies in the fact that the vocals are not divided between

several speaker systems. This, in return, offers more convenience when adjusting the sound system. Different than with active 3- or 4-way configurations – complicated analyzing and measuring sound fields are not necessary.

ON small stages or rooms, using only a monaural sub woofer is absolutely sufficient, since the locating of low-frequency sound is merely impossible under these

conditions. For bigger stages it is indispensable to use separate sub woofers for both sides. Otherwise, the level difference between bass and treble would result in an audible degradation of the overall sound. Of course, incorporating a centrally located sub woofer can additionally improve the sound quality.

System5

2 x F150

2 x F8 PM2600

4 x Speakon system cable 15m

2 x loudspeaker stand poles

THE PowerMax 5 system - the direct successor of the legendary P5 Systems - consists of two 15“ 2-way cabinets F150, two 18“ sub woofers F8, one system power amplifier PM2600, four system cables and two loud-speaker stand poles. So, this compact, active 2-way system is ready for operation. The system power amplifier includes the PowerMax controller and provides 2 x 700 W in the bass and 2 x 600 W in the Mid/Hi range. The system cabling ensures quick and easy installation and highest operational reliability. It is possible to operate two Mid/Hi cabinets and two sub woofers per stereo side on a single PM2600.

3 year warranty.

 

 

PowerMax 5 system: F8 & F150 on a PM2600

F8 & F150

 

5

 

 

 

 

System

 

F8

 

F150

 

 

System3

 

 

System5

2 x F120 12“ Mid/Hi cabinet

 

 

2 x F150 15“ Mid/Hi cabinet

2 x F5 15“ sub woofer

 

 

2 x F8 18“ sub woofer

1 x PM2600 system power amplifier

 

1 x PM2600 system power amplifier

4 x PSS 415 Speakon system cable 15 m

 

4 x PSS 415 Speakon system cable 15 m

2 x PCL 880 loudspeaker stand poles

 

2 x PCL 880 loudspeaker stand poles

 

 

 

PM2600

 

 

F 120

F 5

 

 

F 150

F 8

Technical Specifications

 

 

 

 

Type

 

F120

F150

F5

F8

Design

 

2-way

2-way

Subwoofer

Subwoofer

Components:

LO

1 x 12“

1 x 15“

1 x 15“

1 x 18“

 

 

EVM 12L Pro-Line

EVM 15 L Pro-Line

EV DL15X

EVX 180A

 

HI

DH 2T

DH 2T

-

-

 

 

HT 94

HT 94

-

-

Nominal power rating RMS

 

300 W

400 W

400 W

500 W

Program power capacity

 

600 W

800 W

800 W

1000 W

Frequency response (-10 dB)

 

75 Hz-18 kHz

70 Hz-18 kHz

48 Hz-280 Hz

40 Hz - 300 Hz

Nominal SPL (1W/1m)

 

100 dB

102 dB

100 dB

100 dB

Max. SPL*:

 

128 dB

131 dB

129 dB

130 dB

Impedance:

 

8 Ω

8 Ω

8 Ω

8 Ω

Crossover frequencies:

 

1.6 kHz

1.6 kHz

160 Hz

160 Hz

Dimensions:

 

 

 

 

 

Width:

 

436 mm

522 mm

436 mm

522 mm

Height:

 

629 mm

755 mm

617 mm

737 mm

Depth:

 

339 mm

395 mm

674 mm

674 mm

Weight:

 

21.5 kg

26.5 kg

30.5 kg

38.0 kg

* calculated with program power

PM2600

 

HI-Channels

LO-Channels

Load Impedance

8Ω

4Ω

8Ω

4Ω

Maximum Midband Output Power, THD = 1%, 1kHz, 60Hz

380W

700W

380W

700W

Rated Output Power THD < 0.1%

300W

600W

350W

700W

Maximum Single Channel Output Power

400W

750W

400W

750W

Dynamic-Headroom, IHF-A

 

 

 

 

Maximum RMS Voltage Swing, THD = 1%

58.7V

 

58.7V

 

 

 

 

 

Crossover Type

PowerMax12*, Stereo active 2-way

 

 

Crossover Frequency

90 Hz

 

 

 

Lo-Cut

12dB/octave, 25Hz at -3dB ref. 1kHz

 

 

Frequency Response -3dB, ref. 1kHz, Lo-Cut

25Hz ... 45kHz

 

 

 

Minimum Load Impedance

2.5 Ω

 

 

 

Input Sensitivity at rated output power @ 4Ω

0dBu (775mV)

 

 

 

Maximum Input Level

+21dBu (8.7V)

 

 

 

THD at rated output power, MBW =80kHz

< 0.05%

 

 

 

Crosstalk

< -60dB

 

 

 

Slew Rate

30V/µs

 

 

 

Power Bandwith THD = 1%, ref. 1kHz, half power @ 4Ω

10Hz ... 50kHz

 

 

 

Input Impedance 20Hz ... 20kHz, balanced

20Ω

 

 

 

Damping Factor

> 300

 

 

 

Signal-to-Noise Ratio, A-weighted

> 100dB

 

 

 

Power Requirements

230V, 50Hz ... 60Hz

 

 

Power Consumption at 1/8 maximum output power @ 4Ω

1800W

 

 

 

Protection

Audio limiter (APC), TBC, High temperature,

 

 

DC, HF, Back-EMF, Peak current limiter,

 

 

 

Inrush current limiter, Turn-on delay

 

 

Cooling

Front-to-rear, 4-stage-fans

 

 

Safety Class

I

 

 

 

Dimensions (W x H x D), mm

483 x 177 x 426

 

 

Weight

30kg

 

 

 

*Patent pending; Amplifier at rated conditions, all channels driven, 8Ω loads, HI-Channel rated at 1kHz, LO-Channel rated at 60Hz unless otherwise specified. Note: 0dBu = 0.775V

© by EVI Audio GmbH 03/99/10 · Printed in Germany (KOE) · SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

EVI Audio GmbH · Hirschberger Ring 45 · D-94315 Straubing

Tel: +49 (0) 94 21 / 706 - 0 · Fax: +49 (0) 94 21 / 706 - 265 · www.dynacord.de