Dynacord PM 2600 User Manual

5
&
Systems
ENGLISH
3
PowerMax 3 system: F5 & F120 on a PM2600
F120
F5 & F120
System
2 x F120
2 x F5
PM2600
4 x Speakon system cable 15m
2 x loudspeaker stand poles
System
3
PowerMax 3 system - the
direct successor of the legendary
P3 Systems - consists of two 12“
2-way cabinets F120, two 15“ sub
woofers F5, one system power
amplifier PM2600, four system
cables and two loud-speaker stand
poles. So, this compact, active
2-way system is ready for operation.
The system power amplifier in-
cludes the PowerMax controller
and provides 2 x 700 W in the
bass and 2 x 600 W in the Mid/Hi
range. The system cabling ensures
quick and easy installation and hig-
hest operational reliability. It is pos-
sible to operate two Mid/Hi cabi-
nets and two sub woofers per ste-
reo side on a single PM2600.
3 year warranty.
THE
requirements for modern
audio installations regarding
their sound pressure level, coverage and sound quality can
only be achieved using active multi-component loudspea-
ker systems where the audio signal’s individual frequen-
cy ranges are separately amplified and reproduced.
2-way installations with additional
sub woofer systems probably
offer the best price-performance
ratio. The low frequency range of the audio signal is
reproduced by the sub woofers while high-quality full
range cabinets take care of the Mid/Hi frequencies and
vocals.
HIGHEST
ACTIVE
Loading...
+ 2 hidden pages