Dynabrade 13410 3, 13400 3, 13411 3, 400 RPM, 13400 User Manual

Models:

13400 – 3,400 RPM
13410 – 3,400 Versatility Kit
13411 – 3,400 Versatility Kit

Air Motor and Machine Parts

Parts Page Reorder No. PD01•40

Effective April, 2001

Supersedes PD98•17

.7 Hp Dynisher

Index Key

No. Part # Description

1 53163 Handle Assembly
2 96278 Screw Assembly (3)
3 13442 Shroud
4 40029 Cam Lock
5 01678 Screw
6 53167 Handle Support
7 02552 Bearing (2)
8 53182 Gear Shaft (2)

9 53180 Planetary Carrier
10 53193 Gear (2)
11 04026 Bearing (4)
12 53191 Ring Gear
13 13433 Arbor Adapter
14 13432 Spindle Cover
15 50750 Spacer
16 13434 Flange
17 13441 Flange
18 96264 Screw
19 01007 Bearing
20 01121 Shim Pack
21 53183 Front End Plate
22 01010 Spacer
23 04017 Rotor
24 01185 Blades (4/pkg.)
25 01028 Cylinder
26 50767 Pin
27 13440 Rear End Plate
28 02649 Bearing
29 04014 Screw
30 01041 Grease Fitting
31 13430 Housing Assy.

(includes 13436 Bushing

& 01041 Grease Fitting)
32 01089 Safety Throttle Lever
33 13436 Bushing
34 01017 Pin
35 13438 Handle Grip
36 13435 Valve Stem
37 13439 Ball
38 07145 Spring
39 13437 Speed Regulator
40 01024 O-Ring
41 13428 Packing
42 13427 Regulator Plug
43 01565 Air Control Ring
44 95438 O-Ring
45 95711 Retaining Ring
46 94521 Muffler Base
47 94528 Muffler
48 94522 Muffler Cap
49 95375 O-Ring
50 94526 Spacer
51 94523 Inlet Adapter
52 94519 Muffler Assembly

KEY

A

T

O

Adhesive: A

2

= Loctite #271
A6= Loctite #380
A8= Loctite #567

Torque: N•m x 8.85 = In. - lbs.

G

Oil: O

1

= Air Lube

Grease: G

1

= Lubriplate 630AA

A

8

1

2

3

6

5

4

9

7

8

10

11

12

7

14

15

16

18

17

20

21

22

23

25

26

27

28

31

32

33

34

35

36

39

38

40

37

41

43

45

46

47

50

49

48

A

2

O

1

G

1

A

6

A

6

A

8

13

44

Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air
tools (ANSI B186.1) and any other applicable safety codes and regulations. Please refer to
Dynabrade’s Warning/Safety Operating Instructions for more complete safety information.

19

51

O

1

52

A

8

29

28 N•m

T

17 N•m

T

8.5 N•m

T

23 N•m

T

42

24

30

!

WARNING

Important Operating, Maintenance and Safety Instructions

Carefully read all instructions before operating or servicing any Dynabrade®Abrasive Power Tool.
Warning: Hand, wrist and arm injury may result from repetitive work motion and overexposure to vibration.
Important: All Dynabrade rotary vane air tools must be used with a Filter-Regulator-Lubricator to maintain all warranties.

Operating Instructions:

Warning: Eye, face, respiratory, sound and body protection must be worn while operating power tools. Failure to do so may result in serious injury or death.

Follow safety procedures posted in workplace.

1. With power source disconnected from tool, securely fasten abrasive/ accessory on tool.

2. Install air fitting into inlet bushing of tool. Important: Secure inlet bushing of tool with a wrench before attempting to install the air fitting to avoid

damaging valve body housing.

3. Connect power source to tool. Be careful not to depress throttle lever in the process.

4. Check tool speed with tachometer. If tool is operating at a higher speed than the RPM marked on the tool or operating improperly, the tool should be

serviced to correct the cause before use.

Maintenance Instructions:

1. Check tool speed regularly with a tachometer. If tool is operating at a higher speed than the RPM marked on the tool, the tool should be serviced to

correct the cause before use.

2. Some silencers on air tools may clog with use. Clean and replace as required.

3. All Dynabrade rotary vane air motors should be lubricated. Dynabrade recommends one drop of air lube per minute for each 10 SCFM (example: if

the tool specifications state 40 SCFM, set the drip rate of your filter-lubricator at 4 drops per minute).
Dynabrade Air Lube (P/N 95842: 1pt. 473ml.) is recommended.

4. It is strongly recommended that all Dynabrade rotary vane air tools be used with a Filter-Regulator-Lubricator to minimize the possibility of misuse due
to unclean air, wet air or insufficient lubrication. Dynabrade recommends the following: 11299 Air Line Filter-Regulator-Lubricator — Provides accurate
air pressure regulation, two-stage filtration of water contaminants and micro-mist lubrication of pneumatic components.
Operates up to 100 CFM @ 100 PSIG has 1/2" NPT female ports.

5. Lubricate planetary gears through the gear casing grease fitting with 2-3 plunges for every 50 hours of use, to achieve maximum gear life (order
95542 Grease and 95541 Gun).

6. Use only genuine Dynabrade replacement parts. To reorder replacement parts, specify the Model #, Serial # and RPM of your machine.

7. A Motor Tune-Up Kit (P/N 96234) is available which includes assorted parts to help maintain motor in peek operating condition. Please refer to

Dynabrade's Preventative Maintenance Schedule for a guide to expectant life of component parts.

8. Mineral spirits are recommended when cleaning the tool and parts. Do not clean tool or parts with any solvents or oils containing acids, esters,
keytones, chlorinated hydrocarbons or nitro carbons.

2

(PD01•40)

One Y ear Warranty

Following the reasonable assumption that any inherent defect which might prevail in a product will become apparent to the user within one year from the date
of purchase, all equipment of our manufacture is warranted against defects in workmanship and materials under normal use and service. We shall repair or
replace at our factory, any equipment or part thereof which shall, within one year after delivery to the original purchaser, indicate upon our examination to
have been defective. Our obligation is contingent upon proper use of Dynabrade tools in accordance with factory recommendations, instructions and safety
practices. It shall not apply to equipment which has been subject to misuse, negligence, accident or tampering in any way so as to affect its normal
performance. Normally wearable parts such as bearings, contact wheels, rotor blades, etc., are not covered under this warranty.

• Important: User of tool is responsible for following accepted safety codes such as those published by the American National Standards Institute (ANSI).

• Operate machine for one minute before application to workpiece to determine if machine is working properly and safely before work begins.

• Always disconnect power supply before changing abrasive/accessory or making machine adjustments.

• Inspect abrasives/accessories for damage or defects prior to installation on tools.

• Please refer to Dynabrade’s Warning/Safety Operating Instructions Tag (Reorder No. 95903) for more complete safety information.

• Warning: Hand, wrist and arm injury may result from repetitive work, motion and overexposure to vibration.

Notice

All Dynabrade motors use the highest quality parts and metals available and are machined to exacting tolerances. The failure of quality pneumatic motors can
most often be traced to an unclean air supply or the lack of lubrication. Air pressure easily forces dirt or water contained in the air supply into motor bearings
causing early failure. It often scores the cylinder walls and the rotor blades resulting in limited efficiency and power. Our warranty obligation is contingent
upon proper use of our tools and cannot apply to equipment which has been subjected to misuse such as unclean air, wet air or a lack of lubrication during
the use of this tool.

Safety Instructions:

Products offered by Dynabrade should not be converted or otherwise altered
from original design without expressed written consent from Dynabrade, Inc.

Model Motor Motor Air Inlet Sound Air Flow Rate Machine Dia. Wheel Arbor Dia. Weight Length Height

Number HP (W) RPM Thread Level CFM/SCFM (LPM) Inch (mm) Inch (mm) Pound (kg) Inch (mm) Inch (mm)

13400 .70 (522) 3,400 1/4" NPT 88 dB(A) 6/44 (1,246) 1-13/16 (46mm) 3/4 (19mm) 4.6 (2) 10-3/4 (274) 9 (229)

Additional Specifications: Hose I.D. Size 3/8" (10mm) • Max. SFPM 4450 (SMPM 1350) • 90 PSIG (6.2 Bars)