DX Engineering DXE-AS25G Instructions manual

Tower Accessory
Shelves

DXE-AS25G DXE-AS455G

DX Engineering Tower Accessory Shelves are custom made for Rohn and Amerite Towers. Two models are available: DXE-AS25G fits Rohn 25G and
Amerite 25 towers. DXE-AS455G is adjustable and fits Rohn 45 and 55 towers and Amerite -45 and -55 towers. Made from 3/16” thick, laser cut 304
Stainless Steel, the Accessory Shelves come with all stainless steel hardware for long lasting durable strength. The shelves have holes for most popular
rotators from Hy-Gain and Yaesu. There are also holes in the DXE-AS455G Shelf for the DX Engineering Thrust Bearings (DXE-TB300 and DXE-TB-

400). As with all stainless steel hardware, a good quality Anti-Seeze such as Jet-Lube SS-30 (part number JTL-12555) must be used to avoid galling. When
installing, mount the shelf level to the tower. Tighten all V-Bolts evenly.

DXE-AS25G Accessory Shelf DXE-AS-25G Parts List

1 - AS25G Tower Shelf
3 - V-Bolts, 1.5”, 1/4”-20
3 - Hardware packages for V-Bolts
(Flat Washer, Split Washer, Hex Nut)

DXE-AS455G Accessory Shelf

To assist in making it easy when installing the tower
plate, the two bolts used between the tower plate and
the plate legs should be loose so you can slide the
plate legs in/out. Install V-Bolts in place before
tightening these bolts.

DXE-AS455G Parts List
1 - Tower Plate
3 - Tower Plate Legs
6 - V-Bolts, 1”-2”, 5/16”
6 - Hex Head Bolts, 5/16”-18 x 1”
9 - Hardware packs, 5/16”-18 (Flat Washer,
Split Washer, Hex Nut)

Technical Support

If you have questions about this product, or if you experience difficulties during the installation, contact DX Engineering

at [phone]. You can also e-mail us at: [e-mail]

Warranty

All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from date of shipment. DX Engineering’s sole obligation under these warranties shall be to issue credit, repair or replace any item
or part thereof which is proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or any other work, unless such charges are authorized in advance by DX Engineering. If DX Engineering’s
products are claimed to be defective in material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-charges prepaid by Buyer). Every such claim for breach of these warranties shall be
deemed to be waived by Buyer unless made in writing. The above warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered defective by reason of improper installation, damaged from
severe weather including floods, or abnormal environmental conditions such as prolonged exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts thereof furnished by Buyer or
acquired from others at Buyer’s specifications. In addition, DX Engineering’s warranties do not extend to other equipment and parts manufactured by others except to the extent of the original manufacturer’s warranty to DX Engineering. The obligations under the foregoing
warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies including claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY
WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY
NOT STRICTLY IN ACCORDANCE WITH THE FOREGOING.
©DX Engineering 2021
DX Engineering®, DXE®, DX Engineering, Inc.®, Hot Rodz®, Maxi-Core®, DX Engineering THUNDERBOLT®, DX Engineering Yagi Mechanical®, EZ-BUILD®, TELREX®, Gorilla Grip® Stainless Steel Boom Clamps, Butternut®, SkyHawk™, SkyLark™,
SecureMount™, OMNI-TILT™, RF-PRO-1B®, AFHD-4® are trademarks of PDS Electronics, Inc. No license to use or reproduce any of these trademarks or other trademarks is given or implied. All other brands and product names are the trademarks of their respective
owners.
Specifications subject to change without notice.

DXE-AS-INS Rev.1a

DX Engineering - 1200 Southeast Ave. - Tallmadge, OH 44278 USA

Phone: [phone] ∙ Tech Support and International: [phone]

Fax: [phone] ∙ E-mail: [e-mail]