Dwyer L8 User Manual

Bulletin E-41

®

Model L8 FLOTECT®Liquid Level Switch

Specifications – Installation and Operating Instructions

Model L8

Model L8 Flotect®Liquid Level Switch features a leak proof
body and float constructed from tough, durable polyphenylene sul­fide (PPS) which has excellent chemical resistance. Because the liq­uid level snap switch is magnetically actuated, there is no direct
mechanical linkage to leak or fail, assuring longer life and decreased
maintenance costs. This inexpensive unit is ideal for liquid level
alarm, indication or control. Installation is quick and easy — simply
install in a horizontal position with the index arrow pointing down.

The L8 Flotect

®

Liquid Level Control is UL recognized as an indus­trial motor controller per UL standard 508, suitable for mounting in
a protected environment. This lightweight switch can be used in nu­merous chemical process, industrial systems and similar applica­tions where process conditions are compatible with polyphenylene
sulfide, ceramic 8 and 316 stainless steel. This liquid level switch
provides accurate setpoint control of liquids with specific gravities
as low as 0.6. This compact and reliable control is designed to han­dle temperatures up to 212°F (100°C) and pressures to 150 psig
(10 bar).

MODEL
L8 Level Switch

Model L8-WP

1/2 FEMALE NPT

CONDUIT CONNECTION

1/2 NPTM

1-5/16 OCTAGON

(33.34)

ø1-21/32

(41.31)

3-1/16

(77.79)

10.875

(276.23)

1 NPTM

4-5/16

(109.54)

2-17/32
(64.29)

ø1-1/8

(28.58)

SPECIFICA T IONS
Service: Compatible liquids.
Wetted Materials:

Float and Body: Polyphenylene Sulfide (PPS).
Pin and Spring: 316 SS or Inconel

®

alloy.

Magnet: Ceramic 8.

Temperature Limit: 212°F (100°C).
Pressure Limit: 150 psig (10.34 bar).
Enclosure Rating: General purpose. WP option is weatherproof.
Switch Type: SPDT snap switch. MV option is a SPDT gold con-

tact snap switch.
Electrical Rating: 5A @ 125/250 VAC, 5A resistive, 3A inductive
@ 30 VDC. MV option: 1A @ 125 VAC, 1A resistive, 0.5A inductive
@ 30 VDC.

Electrical Connections: 18 AWG, 18˝ (460 mm) long.
Conduit Connection: 1/2˝ male NPT.
Process Connection: 1˝ male NPT.
Mounting Orientation: Horizontal with index arrow pointing

down.

Weight: 5 oz (0.142 kg).
Agency Approvals: CE, UL 508 for US and Canada.
Specific Gravity: 0.6 minimum.

OPTIONS

-MV, Gold Plated Contacts, for dry circuits. Rated 1A @ 125

VAC; 1A resistive, 0.5A inductive @ 30 VDC. Example L8-MV

-INC, Inconel

wetted parts. Wetted parts are Inconel

®

Option. Inconel®alloy replaces standard 316 SS

®

alloy, ceramic 8, and

Polyphenylene Sulfide. Example: L8-INC

-WP, Weatherproof Enclosure. Optional housing is phenylpo­lioxide and provides weatherproof protection for electrical wiring.
Example: L8-WP

W.E. ANDERSON DIV., DWYER INSTRUMENTS, INC.

P.O. BOX 358 • MICHIGAN CITY, INDIANA 46361 U.S.A.

Phone: [phone] www.dwyer-inst.com
Fax: [phone] e-mail: [e-mail]

INSTALLATION

1. The Model L8 Level Switch is designed for use in clean, com­patible process media free from scale, debris and other for­eign material which could collect on the float and impede its
movement. Build up from such materials will prevent proper
operation. See wetted materials list in the specifications to
assure compatibility with process liquids.

2. Unpack switch and remove any packing material from the
switch and float. Due to variations in fittings and amount of
thread engagement, float must be checked for proper oper­ation during installation.

3. Use pipe thread sealant tape or pipe thread sealant to seal
the 1˝ NPT mounting connection. Avoid excess sealant
which could interfere with float movement. Do not exceed 50
ft/lb (40n/m) torque on the switch housing. Damage can
result.

4. Install switch in a horizontal position with index arrow point­ing down.

5. Wire in accordance with local electrical codes. Lead wire
color codes are as follows. Black - Common, Red - Normally
Closed, Blue - Normally Open. Normal is the contact condi­tion when liquid level is below the actuation point. Closed
contacts open and open contacts close when liquid level lifts
the float to the actuation point.

MAINTENANCE

The Model L8 Liquid Level Switch is not field serviceable and
should be returned if repair is needed (field repair should not be
attempted and may void warranty). Be sure to include a brief
description of the problem plus any relevant application notes.
Contact customer service to receive a return goods authorization
number before shipping.

6. Switch electrical components must be protected from mois­ture at all times. If necessary, install a lightweight, waterproof
junction box over the

1

/2˝ NPT threaded stem. Do not place
mechanical loading on the switch housing. Permanent dam­age can occur. Use flexible Romex sheathing or equivalent.

Inconel®is a registered trademark of Huntington Alloys Corporation.

©Copyright 2010 Dwyer Instruments, Inc.

W.E. ANDERSON DIV., DWYER INSTRUMENTS, INC.

P.O. BOX 358 • MICHIGAN CITY, INDIANA 46361 U.S.A.

Printed in U.S.A. 2/10

FR# 82-440881-00 Rev. 3

Phone: [phone] www.dwyer-inst.com
Fax: [phone] e-mail: [e-mail]