Dwyer BTM3 User Manual

Bulletin T-14

Series BTM3 Maximum/Minimum Bimetal Thermometer

Specifications - Installation and Operating Instructions

STEM LENGTH

1/2 NPT

DIAL
SIZE

13/16

[20.64 ]

1

[25.4]

The Series BTM3 Maximum/Minimum Bimetal Thermometer

accurately measures the current temperature along with the
maximum or minimum temperatures. The adjustment knob is
used to reset the minimum or maximum temperature to the cur­rent reading. Series BTM3 thermometers are conveniently
available in multiple temperature ranges and stem lengths rang­ing from 2-1/2 to 12 inches. These heavy duty back-connected
thermometers are ideal for any industrial application such as
boilers, ovens, or refrigerated cabinets.

Ø3-9/32

[Ø83.34]

SPECIFICATIONS
Wetted Materials: 304 SS.
Lens: Scratch resistant glass.
Accuracy: ±1%.
Ambient Operating Temperature: 15 to 300˚F (-10 to 150˚C).
Dial Size: 3˝.
Connection: 1/2˝ NPT.
Resolution: 2°.
Weight: 7.4 oz (210 g).

DWYER INSTRUMENTS, INC.

Phone: [phone] www.dwyer-inst.com

P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361, U.S.A. Fax: [phone] e-mail: [e-mail]

AMBIENT TEMPERATURE ADJUSTMENT

(All reset adjustments must be done using an adequately agitat­ed temperature bath operating at a known temperature.
Instruments used to monitor such a bath require a greater accu­racy than the thermometer being adjusted.)

The Series BTM3 is equipped with an external reset adjust­ment. To make an adjustment, use a flathead screwdriver or a
small wrench to turn the slotted hexagonal adjustment on the
back of the case. Do this until the temperature pointer reads the
appropriate temperature on the dial.

OPERATION

To obtain a minimum or maximum temperature reading on the
Series BTM3, simply turn the knob on the center of the dial in
the indicated direction to move the red pointer to the current
temperature (black pointer). If the red pointer is above the black
pointer, the red pointer displays the maximum temperature. If
the red pointer is below the black pointer, the red pointer dis­plays the minimum temperature.

©Copyright 2009 Dwyer Instruments, Inc. Printed in U.S.A. 3/09 FR# R7-443612-00 Rev. 1

MAINTENANCE

Upon final installation of the Series BTM3 Bimetal Thermometer
with Maximum/Minimum Temperature Pointer, no routine main­tenance is required. A periodic check of the system calibration
is recommended. The Series BTM3 is not field serviceable and
should be returned if repair is needed (field repair should not be
attempted and may void warranty). Be sure to include a brief
description of the problem plus any relevant application notes.
Contact customer service to receive a return goods authoriza­tion number before shipping.

DWYER INSTRUMENTS, INC.

Phone: [phone] www.dwyer-inst.com

P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361, U.S.A. Fax: [phone] e-mail: [e-mail]