DVDO MATRIX44 Operation Manual

DVDO MATRIX

4K Ultra HD 4x4 Fast HDMI® Matrix

Operation Manual

DVDO Matrix

44TM

DISCLAIMERS

DVDO assumes no responsibility for any inaccuracies that may be contained in this document. DVDO also makes no

commitment to

update or to keep current the information contained

in this

document. DVDO reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or any of its part translated into any language or computer file, in any form or by any means— electronic, mechanical, magnetic, optical, chemical, manual, or otherwise—without express written permission and consent from DVDO.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

DVDO Matrix

44TM

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this equipment:

• Follow all instructions

• Always follow basic safety precautions to redu ce the risk of fire, electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU) +5VDC @ 3A. Do not use the PSU if it is damaged.

• Warning: Using any other power supply could result in damage to this product as well as any displays or sources connected to it.

• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit.

• Use only a dry cloth to clean

• Indoor use only: To reduce the risk of electric shock, do not use

near water or expose to rain or moisture. Keep away from excess moisture

• Do not use near heat sources such as room heaters

• Read all warnings

• Use only accessories approved by DVDO including mounting

brackets

• Unplug the devi c e during lightning storms or when unused for long

periods of time

• Keep away from open flames

• Protect all connected cords including power cords from being

pinched, compressed, stepped on

• Do not open the case. All servicing should be done only by

qualified and approved service personnel

DVDO Matrix

44TM

• Operating temperature range: e.g. 0 to 40oC.

• To disconnect power sources, remove the AC/DC adapters from

the wall outlets a nd any USB connection.

DVDO Matrix

44TM

CONTENTS

INTRODUCTION ........................................................................................... 1

APPLICATIONS ............................................................................................ 1

PACKAGE CONTENTS .................................................................................. 1

SYSTEM REQUIREMENTS ............................................................................... 1

FEATURES ..................................................................................................... 2

OPERATION CONTROLS AND FUNCTIONS .................................................. 3

6.1

Front Panel ................................................................................................ 3

6.2

Rear Panel ................................................................................................. 4

6.3

LCD Menu ................................................................................................. 5

6.4

Remote Control ...................................................................................... 10

6.5

RS-232 Protocols ...................................................................................... 11

6.6

RS-232 Commands ................................................................................. 12

6.7

Web GUI Control .................................................................................... 14

CONNECTION DIAGRAM .......................................................................... 17

SPECIFICATIONS ....................................................................................... 18

ACRONYMS ............................................................................................... 20

FCC Interfer e n ce and Complianc e Statement .............................. 21

Warranty and Ge t t ing Help ................................................................. 22

Legal notices ............................................................................................. 26

DVDO Matrix

44TM

1. INTRODUCTION

DVDO Matrix44 is a 4K 4x4 matrix switch supporting up to 300MHz 4K 50/60Hz in and out. Designed for both home and commercial use, it provides intuitive control and fast switching for installers and home theater enthusiasts. With multiple control options and profession al features, it’s ready for f a s t and reliable integration in your ne xt multidisplay project.

2. APPLICATIONS

• Home Theater/Entertainment

• Lecture Room/Hall Presentation

• Show Room/Demo Room

• Public Commercial Display

• Information Board

3. PACKAGE CONTENTS

• 4 by 4 HDMI 4Kx2K Matrix

• Remote Control with Battery

• Left & Right Rack Ears

• 5V DC Power Adaptor

• IR Receiver Cable

4. SYSTEM REQUIREMENTS

Input source equipment such as Blu-ray/DVD/PS3 player or SetTop-Box and output HDMI TV/Display and or audio amplifier with connection cables.

DVDO Matrix

44TM

5. FEATURES

• HDMI with 3D & 4Kx2K supported, HDCP a nd DVI compliant

• Supports four HDMI inputs and four HDMI outputs

• Displays any of four High-Definition sources on four HDTV displays

Simultaneously with fast switch

• 3DTV Pass-Through

• Supports HDTV resolutions up to 4Kx2K

(3840x2160@24/25/30/50/60 & 4096x2160@24Hz)

• Supports data rate from 300Mbps to 3Gbps and Deep Color up to

1080p 36-bit

• Advanced EDID managem ent - Supports individual EDID or common

EDID

• Web-GUI for easy setup and control

• RS/232, TCP/IP, and IR control

• Supports LPCM 2/5.1/7.1CH, Dolby Digital 2~5.1CH, DTS 2~5.1CH

(Pass through), Dolby TrueHD and DTS-HD Master Audio

• Field-Upgradeable firmware

• Input port HDCP supports both “standard” and “Apple mode”.

The Apple mode selection to improve performance when using Apple source devices.

DVDO Matrix

44TM

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1 POWER: Press this button to turn ON the device and the LED will

illuminated.

2 IR Window: This IR Receiver receives the remote control signal from

the package include remote control only.

3 IN 1~4: Press these IN buttons to select an input from the 4 input

sources.

4 OUT A/D: Press these buttons once a time along with an IN buttons

to select an input source for an output display. i.e. OUT A→

IN1→TAKE or OUT B→ IN4→TAKE.

5 GO: Press this button to confirm the selection of an IN and an OUT

button.

6 CANCEL: Press this button to cancel the IN/OUT selection. 7 ENTER: Press to confirm the selection. 8 MENU: Press to enter into the menu. 9 +/-: Press these buttons to move up/down under menu selection.

10 PRESET: Press “PRESET”, the OLED menu will show Preset then select

IN 1~4. Preset 1~4 after th e selection, press “TAKE” to confirm the selection or press “CANCEL” to cancel the selection.

11 All: Press this button to select all outputs to display with an input

source.

12 MODE: TAKE Mode/R.T.(Real Time) mode switch. 13 LOCK: Press this button to lock all button functions on the panel.

Press 3 seconds to relieve the lock function.

14 Display: Displaying Input and Outputs selection and menu selection.

11 9 8

5 5 2

1 2 3 5 7 10 12

4 6 8 9 11 13 14

DVDO Matrix

44TM

6.2 Rear Panel

1 HDMI IN: Connect from source equipment such as Blu-ray/DVD/

PS3 players, Set-Top-Box or any HDMI equipped source device.

2 HDMI OUT: Connect to HDMI TV/display. 3 SERVICE: This slot is reserved for firmware update use only.

4 CONTROL: RJ-45 connect or for E thernet control up to 10/1 00Mbp s 5 RS232: Seria l control port. 6 IR IN: Connect the IR Receiver included in the package for IR

signal receive from the included remote control.

7 DC 5V: Connect the included Power Supply Unit (5VDC).

Warning – use only the included power supply or damage to the product and connected displays/sources can occur.

7 6 5 4 3 2 1

1 2 3 4 5 6 7

DVDO Matrix

44TM

6.3 LCD Menu

The front panel display provides access to all functions and settings. Note that the Web GUI is normally easier to use and should be the first choice for a new installation. Items are selected by first pressing the MENU button, scroll using +/and make a selection using Enter. A “*” next to an item indicates it is the currently set selection

Menu item Sub Menu Description Default

EDID Mode

Sets what EDID is presented to each input.

All

All inputs are presented the same EDID

– choose to use

output 1

-4 or a preset.

If set, choose what EDID is presented using the “EDID ALL” Menu item

All

Appoint

Individually select an EDID for each input.

Exit

+ 21 hidden pages

DVDO MATRIX44 Operation Manual

Specifications and Main Features

Frequently Asked Questions

User Manual