DURO-LAST® ZINC PLATED METAL ANCHORS
Description:
Duro-Last®, Inc. Zinc-Plated Metal Anchors are for
mechanical fastening of the Duro-Last Parapet
Flashing and termination bar for light duty application
into brick, hollow block and concrete. Zinc-Plated
Metal Anchors are manufactured to the highest
standards in the roofing industry. Zinc-Plated Metal
Anchors have a stainless steel pin for protection
against the harsh roofing environment and are
designed to be easily installed as well as removed.
Anchors are not for use in deck tab fastening.
Installation:
1. Zinc-Plated Metal Anchors are designed to be
driven into a pre-drilled ¼-inch (6 mm) hole with
the depth ½-inch deeper than the anchor length.
2. Insert anchor and set pin with a hammer.
DATA SHEET
Duro-Last: The Proven Performer®
www.duro-last.com
"Duro-Last " an d " The World's Best Roof" are registered marks owned by Duro-Las t , Inc.
22
800-248-0280
2009