Duro-Last Termination Bar User Manual

DURO-LAST® TERMINATION BAR

Description:

Duro-Last® Termination Bar (available in white, gray

and tan color s) is fabricated from a rigid exterior vinyl
with slotted holes 6 inch (152 mm) on center.

Duro-Last termin ation bar may be used as perimeter

detail for the Duro-Last roofing system and as
termination on any square or rectangular penetr ation.

Because of its symmetrical design, it is reversible.
Duro-Last T ermination Bar is available in 10 ft. (3 m)

lengths only. Duro-Last, Inc. will supply the
termination bar in multi ples of 10 ft. (3 m) and has t wo
standard p ackages. The small tube package contains
a maximum of 170 ft. (52 m) while a large box
contains a maximum of 500 ft. (152 m).

Material Safety Data Sheet:
Product: 10 foot Extrusions

MSDS Number: 1225

DATA SHEET

Installation:

1. Duro-Last T ermina tion Bar s hall be fa stened 6 inch
(152 mm) on center with approved fasteners.

2. All termination bar must be fastened 1 inch (25
mm), maximum, from each corner or end of the
bar.

3. The top edge of all sections of termination bar
must be caulked.

4. It is necessary to leave a ¼ inch (6.3 mm) space
between all sections of termination bar to account
for expansion and contraction.

5. All vertical applications requi re caulk on both sides.

6. Refer to details 3010 & 3020 for installation
information.

Duro-Last: The Proven Performer®

www.duro-last.com

"Duro-Last " an d " The World's Best Roof" are registered marks owned by Duro-Las t , Inc.

30

800-248-0280

2009