Duro-Last SB-240 User Manual

DURO-LAST® SUREBOND S B-240 MASTIC
Description:
Duro-Last®, Inc. supplies trowelable mastic for use
with the Duro-Last roofing system. Surebond S B-240 is medium weight solvent rele ase mastic that u tilizes synthetic rubber and resins as base products which provide excellent water-resistant properties and adhesion.
SB-240 is m oisture-resistant, which is most important
with today's high tech single-ply m aterials. SB-240 is normally used as an underseal. This product cannot be used as a splicing c ement, p itch pocket filler, night seal or p erimeter flashing adhesive. It is not contact cement, but a sealant.
SB-240 is formulated for adhesion to all types of building materials including masonry, wood, metal, insulation, and galvanized flashing. Its high tack ensures a weather-tight seal around penetrations.
DATA SHEET
SUREBOND
SB-240
SB-240 is odorless and easy to use. Cleanup is easily accomplished with Mineral Spirits or Naphtha.
Material Safety Data Sheet:
Product Name: SB-240 Single Ply Roofing Mastic
Installation:
1. SB-240 can be used for back-seal, scuppers,
drains, flashing details and under the membrane.
2. In no instance shall the SB-240 be used in such a
way that it would be subject to permanent exposure to ultraviolet radiation.
Note:
Use extreme caution when using solvents for any
cleanup.
SB-240 is available in five gallon pails, which will
seal approximately 450 ft.² (42 m²) of Duro-Last membrane.
SB-240 must be inst all ed in acc ordance with
current Duro-Last, Inc. specifications.
Color Base
Viscosity Medium weight
Type
Storage
Syntheti c ru bber and resin
Above 40°F (4°C) and below
Gray
Solvent release
90°F (32°C)
Duro-Last: The Proven Performer®
www.duro-last.com
"Duro-Last " an d " The World's Best Roof" are registered marks owned by Duro-Las t , Inc.
40
800-248-0280
2009
Loading...