Duro-Last PVC Drain with Adaptor User Manual
DURO-LAST® PVC DRAIN ASSEMBLY
Description:
The Duro-Last® PVC Drain Assembly (available in
white only) is fabricated from a rigid exterior vinyl and
has a black heavy duty cast iron dome. This easy to
install assembly has brass inserts for better
compression and is c ompatible with all types of piping
and the Duro-Last roofing system.
DATA SHEET
DOME
STRAINER
CLAMPING RING/
GRAVEL GUARD
The PVC drain assembly is packaged with a reducer
fitting to accommodate either a 3 inch (76 mm) or
4 inch (102 mm) drain pipe and a Fernco rubber fitting
to provide for use in all types and methods of
construction.
The PVC drain assembly may be used as a
replacement to existing clamping style drain
assemblies or in new construction applications.
Duro-Last PVC drain assembly allows for free water
flow and protection against clogs as well as quick
installation. Other expanders or reducers may be
attached for use with existing piping.
Installation:
1. Refer to detail drawing 2011 for installation
information.
DRAIN
BODY
CLAMPING
BOLT
4" TO 3"
REDUCER
FITTING
PIPE FI TTING
Duro-Last: The Proven Performer®
www.duro-last.com
"Duro-Last " an d " The World's Best Roof" are registered marks owned by Duro-Las t , Inc.
16
800-248-0280
2009
Loading...