Duro-Last Pitch Pan User Manual

DATA SHEET

Pitch Pan

Description:

Prefabricated Pitch Pans deliver a watertight seal
around rooftop protrusions.

Fabricated from 24-gauge vinyl-coated metal

and 6” Duro-Last® membrane skirt to exact

specification.
8” height minimum.
Custom designs available upon request.
Pitch pan is shipped with one corner open to

install around existing penetrations.

Contact Duro-Last or EXCEPTIONAL® Metals to
request a color chart, samples and information
regarding custom metals and finishes.

Installation:

1. Install in accordance with Duro-Last detail
drawing #4045.

2. Any deviation from the requirements set forth in
the detail drawings must be pre-approved, in
writing, by the EXCEPTIONAL Metals Technical
Department.

Warranty:

Duro-Last offers a wide range of warranty coverage for
EXCEPTIONAL Metals products when used with the
Duro-Last roofing system, including paint and finish.

Technical Services:

Product samples, detail sheets, color chips, and color
chart are available for your submittal package. For
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.

“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. Revised 8/12/2012