Duro-Last Gutter User Manual

DATA SHEET

Material

Gauge

Finish

Aluminum

.040 / .050

Mill or Kynar®

Stainless Steel

24-gauge

N/A

Bonderized Steel

24-gauge

N/A

Galvalume

24-gauge

Mill or Kynar®

Copper

16 oz.

Mill

DX-Style

EX-Style

MX-Style

LX-Style

Note: Gutter size to be determined by
the contractor or design professional.

Description:

Gutters feature four box-style profiles in three sizes
each. Support straps are provided based on 30”
centers.

Front edge of gutter is 2” lower than the back

edge.

Internal splice plates eliminate the need to

completely rivet sections together. Use
compatible sealant.

Riveted inside and outside miters can be

fabricated to any angle.

Roof flanges can be bent to accommodate

various roof pitches or eliminated altogether.

Custom sizes and profiles are available.

Contact Duro-Last® or EXCEPTIONAL® Metals to
request a color chart, samples and information
regarding custom metals and finishes.

Energy Efficiency:

Gutter

LEED® and ENERGY STAR® compliant; Recyclable.

Installation:

1. Install in accordance with Duro-Last detail
drawings #2091 and #3025.

2. Any deviation from the requirements set forth in
the detail drawings must be pre-approved, in
writing, by the EXCEPTIONAL Metals Technical
Department.

Warranty:

Duro-Last offers a wide range of warranty coverage for
EXCEPTIONAL Metals products when used with the
Duro-Last roofing system, including paint and finish.

Technical Services:

Product samples, detail sheets, color chips, and a color
chart are available for your submittal package. For
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.

“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. Revised 8/30/2012