Durabrand DCT2405R User Manual

FEATURES
181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.
PLL Frequency Synthesized Tuning- Provides free and easy channel selection and lets you tune directly to any channel using the channel number buttons on the remote control.
Sleep Timer
Closed Caption Decoder
V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.
Tinted, Bright Black Matrix Picture Tube
Full-Function Remote Control
On-Screen Function Display
S-VIDEO Input- Allows you to get better picture detail and clarity.
Front / Rear AV Input
MTS / SAP Tuner
Resume Function- If the power fails or is disconnected while the TV is on, the TV will turn on automatically when the power resumes.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con­nected to the grounding system of the building as close to the point of cable entry as practical.
FCC WARNING - This equipment may generate or use radio frequency energy. Changes or modifications to this equip­ment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unautho­rized change or modification is made.
Owner’s Manual
1EMN20589 Printed in Thailand
L3401CB * * * * *
DCT2405R
23 INCH COLOR TELEVISION
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI­ANCE TO RAIN OR MOISTURE.
IMPORTANT SAFEGUARDS
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SER­VICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT DAN­GEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRE­SENT WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
The important note is located on the rear of the cabinet.
1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated.
2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
5. CLEANING - Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol clean­ers. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupt­ed service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.
6. ATTACHMENTS - Do not use attachments not recom­mended by the TV manufacturer as they may cause hazards.
7. WATER AND MOISTURE - Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.
8. ACCESSORIES - Do not place this TV on an unstable cart, stand, tripod, bracket, or table. The TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV. Any mounting of the appliance should follow the man­ufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appli­ance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
9. VENTILATION - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar sur­face. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufactur­er’s instructions have been adhered to.
10. POWER SOURCES - This TV should be operated only from the type of power source indicated on the mark­ing label. If you are not sure of the type of power sup­ply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the oper­ating instructions.
11. GROUNDING OR POLARIZATION - This TV is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, con­venience receptacles, and the point where they exit from the appliance.
13. OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to pro­vide some protection against voltage surges and built­up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding elec­trode. (Fig. A)
14. LIGHTNING - For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges.
15. POWER LINES - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or cir­cuits as contact with them might be fatal.
16. OVERLOADING - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liq­uid of any kind on the TV.
18. SERVICING - Do not attempt to service this TV your­self as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE - Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power supply cord or plug is damaged or
frayed.
b. If liquid has been spilled, or objects have fallen into
the TV.
c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the
operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified techni­cian to restore the TV to its normal operation.
e. If the TV has been dropped or damaged in any way. f. When the TV exhibits a distinct change in perfor-
mance, this indicates a need for service.
20. REPLACEMENT PARTS - When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards.
21. SAFETY CHECK - Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition.
22. HEAT - This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ELECTRIC SERVICE EQUIPMENT
GROUND CLAMP
NEC - NATIONAL ELECTRICAL CODE POWER SERVICE GROUNDING
ELECTRODE SYSTEM (NEC ART 250, PART H)
S2898A
GROUND CLAMPS
GROUNDING CONDUCTORS (NEC SECTION 810-21)
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
ANTENNA LEAD IN WIRE
PRECAUTIONS
Place your TV in a room with adequate ventilation.
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.
Do not place your TV on soft surfaces, such as rugs or blankets.
Leave enough room for air to circulate around the bottom, top and back of the set.
The serial number of this product may be found on the back of the TV. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.
DURABRAND
Limited
WARRANTY
WAL-MART warrants this product to be free from manufacturing defects, in material and workmanship under normal use and conditions for a designated period from date of original purchase in Canada. For a WARRANTY period of
12 MONTHS
Should service be necessary under this warranty for any reason due to manufacturing defect during the warranty period, Wal-Mart Canada will repair or replace (at its discretion) the defective merchandise at no charge.
THIS UNIT CAN BE REPAIRED AND OR REPLACED BY WAL-MART CANADA SERVICE NOTE: This warranty is void if the product is:
(a) Damaged through negligence, misuse, abuse, or accident. (b) Used in a commercial application or rentals. (c) Modified or repaired by anyone other than Wal-Mart Canada. (d) Damage caused by improper connection to other equipment. (e) If the original proof of purchase cannot be supplied.
NOTE: This warranty does not cover:
(a) Damage to the tape or tape cartridge (if applicable). (b) Cleaning of video heads (if applicable). (c) Damage occurred or costs incurred in the shipping of the product to Wal-Mart
Canada.
(d) Ordinary adjustments to the product which can be performed by customer as out-
lined in the owner’s manual. (e) Signal reception problems caused by external antenna, cable systems or interference. (f) Incompatibility due to the change in TV/CATV broadcast systems after the product
was sold.
THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE ORIGNAL PUR­CHASER AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT, ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE EXPRESSED WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESSED OR IMPLIED, SHALL APPLY TO THIS PRODUCT THEREAFTER. UNDER NO CIRCUMSTANCES SHALL WAL-MART CANADA BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF, OR IN CONNECTION WITH THE USE OF THIS PRODUCT.
WAL-MART CANADA Inc.
1940 Argentia Road
Mississauga, Ontario
L5N 1P9
Canada
NOTE:CHANNEL SET UP MUST BE COMPLETED BEFORE THE SET WILL
FUNCTION PROPERLY. SEE INSIDE FOR PROCEDURE.
Date of Purchase Dealer Purchase from Dealer Address
Dealer Phone No. Model No. Serial No.
PORTABLE CART WARNING
S3126A
VIDEO L-AUDIO-RHEADPHONE
VOLUME
CHANNEL
MENU
PO W
ER
POWER
POWER
123
456
789
0 +100
DISPLAY
VOL
CH
CH
VOL
SLEEP
CHANNEL
RETURN
GAME
MENU
MUTE
INPUT
SELECT
PREPARATION FOR USE
CONNECTIONS
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
[EXTERNAL CONNECTION]
VIDEO1 input (Rear)
ANT. IN
L
R
VIDEO 1 INPUT
VIDEO
S-VIDEO
VIDEO2 input (Front)
Video Cable
Audio Cable
Video Cassette Recorder
Video Cable
Audio Cable
Video Game
Video Camera
Front of this TV
Rear of this TV
ex.
ex.
OPERATIONS
Note:
If some digits appear in the corner of the screen when the unit is turned on for the first time, hit
[POWER] without unplugging the power cord.
REMOTE CONTROL AND FRONT PANEL FUNCTION
POWER button
To turn TV on/off
Channel number buttons
CH(ANNEL) KK/LLbuttons
MENU button
To view on-screen menu
GAME button SLEEP button
DISPLAY button
To display CH No./Audio Status
CHANNEL RETURN button
To return to previous channel
MUTE button
VOL(UME) KK/LLbuttons
To select channels
To adjust volume
Infrared Sensor Window
POWER button
To turn TV on/off
CHANNEL KK/LLbuttons
To select channels
VOLUME XX/YYbuttons
To adjust volume
MENU button
To view on-screen menu
AUDIO L/R input jacks
VIDEO input jack
INSTALLING THE BATTERIES
Install two AA batteries (supplied) matching the polarity indicated inside battery compartment of the remote con­trol.
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.
• Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones.
• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
2
1
3
HEADPHONE jack
S-Video Cable
OR
Note:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment.
Notes:
The AUDIO L jack is for mono input. The sound is heard from both speakers. Use this jack for connecting monaural audio equipment.
The S-VIDEO jack is given priority over the VIDEO jack on the rear panel.
Note:
For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. IN jack before moving the unit.
(OUT)
(OUT)
(OUT)
(IN)
(IN)
(IN)
(OUT)
(IN)
(OUT)
(IN)
SELECTING AUDIO/VIDEO INPUT
When you use the AUDIO/VIDEO input jacks, select “VIDEO1” or “VIDEO2” mode by hit­ting [INPUT SELECT] on the remote control. The input mode changes by hitting the button as following:
•To use the jacks on the rear of the TV, select “VIDEO1”.
•To use the jacks on the front of the TV, select “VIDEO2”.
TV channel VIDEO1 (Rear) VIDEO2 (Front)
INPUT SELECT button
To select TV or external input
Notes:
When you disconnect the unit from the AC outlet or when you have a power failure, the sleep time will be lost.
To cancel the sleep timer, hit [SLEEP] repeatedly until “SLEEP 0” is displayed.
The Sleep Timer Setting display will disap­pear automatically after 10 seconds of the operation.
SLEEP TIMER SETTING
1
1
2
2
The time increases by 10 minutes up to 90.
repeatedly
ANT. IN
L
R
VIDEO 1 IN PUT
VIDEO
S-VIDEO
ANT. IN
IN
OUT
Plug the incoming cable into the ANT. IN jack on the rear of the TV.
*Note (DO NOT DISCONNECT FROM BOX) Some cable TV systems use scrambled signals and require a special converter to receive these channels. Consult your local cable company.
OR
Incoming cable from home Antenna / Cable Company (No Cable Box)
Incoming cable from Cable Company or Satellite Antenna
Cable Box or Satellite Box*
Cable
TV signal
Antenna
UHF/VHF Rod Antenna
(Not supplied)
Rear of this TV
OR
INPUT
SELECT
SLEEP
SLEEP
SLEEP 0
SLEEP 10
OPERATIONS (Continued)
OPTIONAL SETTINGS
PICTURE ADJUSTMENT
1
1
2
2
Adjust the setting
3
3
PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]
GAME MODE
Set to the most suitable position for video games.
[-] : OFF [+] : ON
BRIGHT
Adjust until the darkest parts of the picture are as bright as you prefer.
[-] : decrease brightness [+] : increase brightness
CONTRAST
Adjust to increase or decrease contrast.
[-] : decrease contrast [+] : increase contrast
COLOR
Adjust to be brilliant or pale color.
[-] : be pale color [+] : be brilliant color
TINT
Adjust to obtain natural skin tones.
[-] : add red [+] : add green
SHARPNESS
Adjusts the detail of the picture.
[-] : make soft [+] : make clear
Notes:
The display will disappear automatically after 10 seconds unless you press any buttons.
Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, hit [POWER] to turn off the TV and turn it on again after about 30 minutes.
CHANNEL SETTING
1
1
[AUTO PRESET CHANNELS]
As the initial setting, this TV has memorized all channels, including the ones not available in your area. This feature automatically puts only available channels into the memory.
1
1
The tuner scans and memorizes all available channels in your area.
2
2
Select the desired language
3
3
To exit the menu
Notes:
The TV distinguishes between standard TV channels and cable (CATV) channels.
The TV may recognize TV channels as CATV channels if reception condition is poor. If this happens, check the antenna connections and try steps 2 to 3 again when reception conditions are better.
If there is no TV sig­nal input, “NO TV SIGNALS” will appear on the display after the completion of channel scanning.
[ADDING/DELETING CHANNELS]
You can add or delete channels manually.
LANGUAGE SELECTION
3
3
When the scanning is completed, the lowest memorized channel appears on the TV screen.
1
1
2
2
Select the channel you wish
4
4
Note:
The menu will disappear automatically after about 10 seconds.
Notes:
If closed captioning is not broadcasted, you cannot receive it and nothing is displayed.
When your TV receives a special effects playback signal (i.e., Search, Slow and Still) from a VCR’s video output channel (CH3 or CH4), the TV may not display the correct caption or text.
Captions and texts may not match the TV voice exactly.
Interference may cause the closed caption system not to function properly.
The caption or text characters will not be displayed while the menu display or func­tions display is shown.
If a black box appears on the screen, this means that the TV is set to TEXT mode. To clear screen, select CAPTION [C1], [C2] or [OFF].
Add: light blue Delete: light red
2
2
3
3
Select “PICTURE”
[
GAME MODE
][
BRIGHT
][
CONTRAST
]
[
SHARPNESS
][TINT] [COLOR]
Select an item to adjust
Select [ENG]
[ENG(lish)] [ESP(añol)]
[FRA(nçais)]
Select “CHANNEL SET”
Select “CHANNEL SET”
Select “ADD/DELETE”
Select “AUTO PRESET CH”
15
ADD/DELETE
Add or delete the channel
You may view specially labeled (cc) TV pro­grams, movies, news and prerecorded tapes, etc. with either a dialogue caption or text dis­play added to the program.
1
1
2
2
Select the desired caption mode
To exit the menu
3
3
[OFF] [C1] [C2]
[T2] [T
1]
Select “CAPTION”
[CAPTION MODE (C1, C2)]
CAPTION1 (C1) displays standard closed captions (what a character is saying).
CAPTION2 (C2) displays foreign language closed captions (foreign language words showing what a character is saying).
There are three ways of displaying accord­ing to programs: Paint-on mode: Displays input characters
on the screen immediately.
Pop-on mode : Once characters are stored
in memory, they are dis­played all at once.
Roll-up mode : Displays the characters con-
tinuously by scrolling (max. 4 lines).
[TEXT MODE (T1, T2)]
TEXT1 (T1) and TEXT2 (T2) display half-screen text by scrolling (such as a channel guide, schedule or announcement).
CLOSED CAPTION
*Second Audio Program (SAP) :
Your program can also be received in a sec­ond language or sometimes a radio station.
MULTI-CHANNEL TELEVISION SOUND (MTS
)
Typ e of
broadcast
Regular
-None-
Stereo
broadcast
STEREO
SAP
Menu
Selection
MAIN
MONO
SAP*
-None- -None-
MONO
STEREO
SAP
MAIN
MAIN
Note:
If you select [SAP] when second audio is not available, the TV will receive normal audio.
1
1
2
2
MENU
Select the desired sound mode
[MAIN] [MONO] [SAP]
3
3
MENU
PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]
Select “TV SOUND”
To exit the menu
...
...
This feature is helpful for playing video games. By hitting [GAME], you can set Game
mode (suitable picture setting for games) and TV selects automatically front A/V input.
GAME MODE
Notes:
If you hit [GAME] when the TV is off, the TV turns on and will be in Game mode and external input mode automatically.
If you adjust another picture control while in Game mode, this mode will automatically be canceled.
1
1
To use video games
To cancel Game mode only
Picture: GAME Input: Front (VIDEO2)
2
2
3
3
VIDEO1
To watch another input (TV or Rear Input)
repeatedly
Select “PICTURE”
After 10 seconds
VIDEO2
Picture: Customized Input: Front (VIDEO2)
[-]
GAME MODE
[+]
OFF ON
MENU
CH
CH
VOL
CH
CH
VOL
PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]
ADD/DELETE AUTO PRESET CH
VOL
VOL
VOL VOL
MENU
CH
CH
CH
CH
PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]
ADD/DELETE AUTO PRESET CH
GAME
GAME
MENU
VOL
INPUT
SELECT
NO TV SIGNALS
CH
CH
VOL VOL
MENU
VOL
CH
CH
VOL
VOL
[-]
BRIGHT
[+]
MENU
CH
CH
PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]
MENU
CH
CH
PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] TV SOUND [MAIN]
VOL VOL
MENU
VOL VOL
MENU
Loading...
+ 5 hidden pages