Du Pont WFPT200, WFPT100, WFPT075 Installation Instructions Manual
V4.6
®
INSTALLATION INSTRUCTIONS
INSTRUCCIONES DE INSTALACIÓN
INSTALLATION INSTRUCTIONS
mirage Filtered
Water Pitcher
Model Series WFPT200
traditional Filtered
Water Pitcher
Model Series WFPT100
vista Filtered
Water Pitcher
Model Series WFPT075
PROPER INSTALLATION: Please read all instructions, specifications, and
precautions before installing and using your water filter system.
®
WFPT200 / WFPT100 / WFPT075
Information & Assistance
www.waterfiltration.DuPont.com
866-709-2086 Toll Free 800-441-7515
For Service Requests & Product Information For Safety & Health Questions
Protect Plus, LLC • Hickory, NC 28601 USA
2 V4.6
Mirage Filtered Water Pitcher
Components & Features
PARTS & HARDWARE INCLUDED
• Mirage Pitcher with Reservoir
• One (1) Great Taste Universal Pitcher Cartridge
TOOLS & MATERIALS
NEEDED FOR INSTALLATION
• Cold running water.
• One tall water glass, large enough to soak the cartridge.
• Mild soap for washing the pitcher.
Filter
Cartridge
Reservoir
Lid
Pitcher
WFPT200 / WFPT100 / WFPT075
3
PARTS & HARDWARE INCLUDED
• Traditional Pitcher with Reservoir
• One (1) High Protection/High Capacity Filter
TOOLS & MATERIALS
NEEDED FOR INSTALLATION
• Cold running water.
• One tall water glass, large enough to soak the cartridge.
• Mild soap for washing the pitcher.
Filter
Cartridge
Reservoir
Lid Filter Life
Calendar
Pitcher
V4.6
WFPT200 / WFPT100 / WFPT075
Traditional Filtered Water Pitcher
Components & Features
4 V4.6
Vista Filtered Water Pitcher
Components & Features
PARTS & HARDWARE INCLUDED
• Vista Pitcher with Reservoir
• One (1) Great Taste Universal Pitcher Cartridge
TOOLS & MATERIALS
NEEDED FOR INSTALLATION
• Cold running water.
• One tall water glass, large enough to soak the cartridge.
• Mild soap for washing the pitcher.
Filter
Cartridge
Reservoir
Lid
Pitcher
WFPT200 / WFPT100 / WFPT075
5
Wash Your Hands
Wash your hands with soap and water and remove the cartridge from the
cartridge bag.
Step
Soak Cartridge
Soak the cartridge upright in cold tap water for 15
minutes. Your cartridge is packed dry to preserve the
carbon freshness. Soaking activates the carbon and
prepares the cartridge for use. You may need to use
weights to keep the cartridge submerged during
this step.
2
WFPT200 / WFPT100 / WFPT075
1
Step
Installation
V4.6
6 V4.6
4
Step
Flush Cartridge
After the cartridge has soaked for 15 minutes, flush the
cartridge by holding it upright under cold running tap
water for 15 seconds.
Wash Pitcher
Hand wash the pitcher, lid and reservoir with mild soapy water and rinse well.
3
Step
Installation
7
Drain Excess Water
Allow excess water to drain completely from the cartridge.
6
Step
Insert Cartridge
Insert the cartridge into the reservoir by lining up the notch in the cartridge with
the rib in the cartridge reservoir. Press the cartridge in
firmly to ensure a tight seal. Fill the reservoir with cold tap
water. It is normal for carbon particles to appear in the
first few fillings. Use the first two pitchers of filtered water
to water plants, or simply discard.
WFPT200 / WFPT100 / WFPT075
5
Step
Installation
V4.6
Loading...